MPE

FCC ID: 2AHYVBLOCKPARTY

RF Exposure Info

Download: PDF
FCCID_3256337

FCC ID: 2AHYVBLOCKPARTY Test Result of RF Exposure Evaluation According to the KDB-447498 D01 V06, FCC 47CFR § 2.1091 the following RF exposure evaluation shall to demonstrate RF exposure compliance. Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2, Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm。 ANT A Max tune Output Antenna Power Limit Result Target power Frequency up power power to Gain(dBi) Density at (mW/cm2) W/ tolerance (MHz) tolerance antenna R=20cm (dBm) (dBm) (mW) (mW/cm2) 5736 -6.8 ±1.0 -5.8 0.263 2.408 0.00013 1.0 Pass 5762 -6.8 ±1.0 -5.8 0.263 2.408 0.00013 1.0 Pass 5814 -6.8 ±1.0 -5.8 0.263 2.408 0.00013 1.0 Pass ANT B Max tune Output Antenna Power Limit Result Target power Frequency up power power to Gain(dBi) Density at (mW/cm2) W/ tolerance (MHz) tolerance antenna R=20cm (dBm) (dBm) (mW) (mW/cm2) 5736 -6.7 ±1.0 -5.7 0.269 2.408 0.00013 1.0 Pass 5762 -6.7 ±1.0 -5.7 0.269 2.408 0.00013 1.0 Pass 5814 -6.7 ±1.0 -5.7 0.269 2.408 0.00013 1.0 Pass

FCC ID: 2AHYVBLOCKPARTY Simultaneous transmission MPE According to KDB447498 for Transmitters used in mobile exposure conditions for simultaneous transmission operations; ∑ of MPE ratios ≤ 1.0 ANT A+ANT B Power Power Power Density Limit Result Density at Density at at R=20cm (mW/cm2) Frequency R=20cm R=20cm (mW/cm2) (MHz) (mW/cm2) (mW/cm2) ANT A+ANT B ANT A ANT B 5736 0.00013 0.00013 0.00026 1.0 Pass 5762 0.00013 0.00013 0.00026 1.0 Pass 5814 0.00013 0.00013 0.00026 1.0 Pass BT4.0 Max tune Output Antenna Power Limit Result Target power Frequency up power power to Gain(dBi) Density at (mW/cm2) W/ tolerance (MHz) tolerance antenna R=20cm (dBm) (dBm) (mW) (mW/cm2) 2402 1.8 ±1.0 2.8 1.905 1.0 0.000379 1.0 Pass 2440 1.8 ±1.0 2.8 1.905 1.0 0.00013 1.0 Pass 2480 1.8 ±1.0 2.8 1.905 1.0 0.00013 1.0 Pass Conclusion: So no SAR is required.


Document Created: 2016-12-29 11:19:14
Document Modified: 2016-12-29 11:19:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC