MPE

FCC ID: 2AHRH-FJ1000LS

RF Exposure Info

Download: PDF
FCCID_4299535

FCC ID: 2AHRH-FJ1000LS RF Exposure Evaluation FCC Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Electric field Frequency range Magnetic field strength Power density Averaging time strength 2 (MHz) (A/m) (mW/cm ) (minutes) (V/m) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 2 3.0–30 1842/f 4.89/f *(900/f ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f2) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2, Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually.

FCC ID: 2AHRH-FJ1000LS Test Result of RF Exposure Evaluation LTE Power Frequency Output power Output power to Density at Limit Band (MHz) to antenna Result R=20cm (mW/cm2) antenna (dBm) (mW) (mW/cm2) LTE Band 12 711 23.95 248.313 0.05804 0.474 PASS LTE Band 25 1882.5 22.96 197.697 0.03426 1.0 PASS LTE Band 26 821.5 23.96 248.886 0.05817 0.548 PASS Remark: Antenna gain: LTE Band 12: 0.7dBi LTE Band 25: -0.6dBi LTE Band 26: 0.7dBi


Document Created: 2019-05-27 06:54:42
Document Modified: 2019-05-27 06:54:42
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC