User Manual

FCC ID: 2AHRH-FJ1000LMA

Users Manual

Download: PDF
FCCID_4156509

FJ1000MV TM120M-A User Manual Positioning Universal 1

FJ1000MV Contents 1 Introduction ....................................................................................................................3 1.1ID and Tooling Design.......................................................................................................3 2 Hardware.........................................................................................................................3 2.1 Physical and Electrical Specifications ..............................................................................3 2.2 Input/Output...................................................................................................................3 2.3 Cellular Communication...................................................................................................3 2.4 Harnesses.........................................................................................................................3 2.5 Event Codes ....................................................................................................................4 2.6 System network structure...............................................................................................5 2.7 Appearance and installation instructions........................................................................5 3 USER MANUAL.................................................................................................................6 3.1 INTRODUCTION...............................................................................................................6 3.2 List...................................................................................................................................6 3.3 Description......................................................................................................................7 2

FJ1000MV 1.1 ID and Tooling Design Dimensions: 83.5mm*47.5mm*18mm Weight: 60g (with optional battery) 2.1 Physical and Electrical Specifications Input Voltage: 9-36VDC Power consumption: - Active mode: 100mA ＠12VDC - Sleep mode: <8mA ＠12VDC Operating temperature: -30℃ to 80℃ Storage temperature: -30℃to 80℃ 2.2 Input/Output Download and debug port: 1 SWD Interface: 1 Function LEDs: 2 GPS Status Green Cellular Status Orange Buzzer:1 2.3 Cellular Communication Operation mode ：LTE/GPS Operation band ：LTEB2/B4/B12;GPS 1.57542GHz Modulation: QPSK/16QAM 2.4 Harnesses There are 3 harnesses that may be used with the TM120M-A: 1. 4 wire power and I/O harness 2. 4 wire Uart 3. 14 wire power and I/O harness The picture as below. 3

FJ1000MV 2.5 Event Codes The table below relates the Event codes in the message to the reason the message was generated: Message # Message Type Description 0 Interval Auto Report (auto report when moving) 1 Vibration Vibration alarm(report when GPS is OFF and vibration detected) 2 Power Disconnect Power cut alarm (report when external power is cut off) 3 Power Connect Power connected alarm (external power has been connected) 4 Ignition ON Hardwired or Virtual Ignition ON detected 5 Ignition OFF Hardwired or Virtual Ignition OFF detected 6 Input 2 High Input2 high alarm 7 Input 2 Low Input2 low alarm 8 9 10 11 12 4

FJ1000MV 2.6 System network structure GPS alarm is currently the most advanced security Settings. GPS alarm more expensive than ordinary burglar alarm, and need to pay the additional service fee, so the popularity is not high. And alarm is based on a GPRS network communication network, combining with the intelligent linkage of mobile phone and car anti-theft, this kind of alarm alarm is not restricted by distance, overlay network is wide, but need to pay the monthly rental. Buying guide to edit GPS alarm when the choose and buy, need to pay attention to is the comparison of several common GPS performance. 2.7 Appearance and installation instructions 3.1 Introduction. This chapter is user manual for TM120M. 3.2 List. 1.One UART cables. 5

FJ1000MV 2.three TM120M devices. 3.One DC 12V cable. 6

FJ1000MV 3.3 Description. 1. Connect the UART cable to the UART interface of MCU on the device, the other side connect to PC, you can communication to MCU with UART cable. 2. Connect the DC 12V cable to the connector of J203 on the device, the other side connect to DC 12V, you can use the DC 12v cable to supply power. 7

FJ1000MV 3. The other interfaces of the TM120M device are shown in the following pictures.(The Modem UART 2 on device is for modem debug and update firmware). 8

FJ1000MV Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 9


Document Created: 2019-01-23 09:47:30
Document Modified: 2019-01-23 09:47:30
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC