user_manual

FCC ID: 2AHR2-R5

Users Manual

Download: PDF
FCCID_3921255

Buttons and Operations FCC Warning Statement Bluetooth Speaker 4. Play/Pause key: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to 1.Press once: operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, - Play or Pause music; pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference - Connect to incoming call; in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and USER MANUAL 6 5 - Hang up phone conversation; used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no - When Bluetooth is paired with the mobile phone, press twice guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to 1 2 4 3 to redial the previous phone number. radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to 2.Press and hold: correct the interference by one or more of the following measures: 1.Power ON/OFF/ RGB Light Button: 1.Press and hold for 3 seconds to Power ON the speaker, it - Disconnect the incoming call; ‐‐ Reorient or relocate the receiving antenna. comes with a voice prompt. -Under Play mode: Press and hold for two seconds to disconnect ‐‐ Increase the separation between the equipment and receiver. 2.Press again to Power OFF the speaker, it comes with a voice prompt. the Bluetooh.Hold for five seconds reset to factory default and ‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 3.After power on, press the Power button again will turn off the RGB light, keep press it will change the RGB light with 7 kinds clear all pairing settings. ‐‐ Consult the dealer or an experienced radio/TV technician for help. of colors. 4.After power on, double press the Power button will enter the 5.LED Indicators: TWS mode. Blue Indicator: The blue LED blinking when the speaker waiting for 2.V- Key: 1.Press once to turn down the volume paring,and stays on after being connected. This device complies with part 15 of the FCC Rules. Operation is subject to the following 2.Press and hold for one second to play the previous song Red Indicator: The red LED stays on when charging, off after being 3.V+ Key: two conditions: (1) This device may not cause harmful interference, and 1.Press once to turn up the volume Model No: R5 2.Press and hold for one second to play next song fully charged. (2) this device must accept any interference received, including interference that may cause undesired operation. 6.Charging Port : 3.Power ON the other R5 speaker, and then double press the SPECIFICATIONS Connect the micro USB side of the supplied cable to the charging Power button.At this moment, the two speakers are in TWS Bluetooth Version V4.2 port of the speaker, and the USB side to any USB 5V/2A charger. The pairing mode. Rated Power 5W speaker indicates charging mode by red LED,when the speaker 4.Two speakers will be paired automatically under the TWS mode. When the pairing was completed, you will hear a reminder sound. Waterproof IPX7 is fully charged the LED turn off automatically. One speaker will have blue LED light stay on, while the other one, Battery Capacity 1800mAh Bluetooth Pairing: the blue LED light is blinking. Power Supply DC 5V/1A 1.Turn on speaker the indicator flash in blue and waiting for device 5.The speaker with blue LED light stay on will performs as the Frequency Response 115Hz-16KH connection. Right speaker, and also the SLAVE speaker.The other with blue Receiving Range ≤65feet(Open Field) 2.Go to Bluetooth setting in your device, find R5 and choose LED light blinking will performs as the Left speaker; it is also the Driver Unit 4Ω5W/53mm to connect; when pairing is successful, you will hear a reminder MAIN speaker. Charging Port Micro USB sound and the indicator will turn in blue steadily. 6.Go to Bluetooth setting in your device, connect R5. Playing Time UP to 10 hours(@65dB SPL) 7. Play music as usual and now you are on stereo sound quality, Charging Time 2-3 hours TWS Bluetooth pairing The master speaker works as the left-channel and the slave If you already have 2pcs R5 speaker, you can pair TWS. Please speaker works as the right-channel. follow the steps as below: 8.Under the TWS mode, when you turn off one speaker,the other 1.Connect the TWS for the first time, please disconnect all the Bluetooth speaker will be OFF simultaneously. pairing between the speakers and your smart phone, and turn power **You only need to do the TWS pairing for the first time. Accessories: NOTE: When there is an incoming phone call, either speaker is 1pcs User manual off for two R5 speakers. 1pcs USB charging cable 2.Select any one of the R5 speaker, power it ON, and then double able to receive phone calls but only the "master" speaker will press the POWER button, you will hear a reminder sound. talk.


Document Created: 2018-07-10 11:02:48
Document Modified: 2018-07-10 11:02:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC