Modular Approval Letter

FCC ID: 2AHMRESP12S

Cover Letter(s)

Download: PDF
FCCID_3841013

                   Shenzhen Ai—Thinker Technology co., LTD

FCC ID: 2AHMRESP12S
MODULAR APPROVAL LETTER
Modular Approval Requirement                                          Yes         No
(i) The radio elements of the modular transmitter must have
their own shielding. The physical crystal and tuning eapacitors
may be located external to the shielded radio elements.
                                                                        /
                                                                        /
(ii) The modular transmitter must have buffered
modulation/data inputs (if such inputs are provided) to ensure
that the module will comply with part              j
15 requirements under conditions of excessive data rates or
over—modulation.
(iii) The modular transmitter must have its own power supply
regulation.
(iv) The modular transmitter must comply with the antenna
and transmission system requirements of §§ 15.203,
15.204(b) and 15.204(c). The antenna must either be




                                                                      <_
permanently attached or employ a "unique" antenna coupler
(at all connections between the module and the antenna,
including the cable}. The "professional installation" provision of
§ 15.203 is not applicable to modules but can apply to limited
modular
approvals under paragraph (b) of this section.
(v) The modular transmitter must be tested in a stand—alone
configuration                                                         y K
(vi) The modular transmitter must be equipped with either a
permanently affixed label or must be capable of electronically
displaying its FCC identification number.
(vii) The modular transmitter must comply with any specific
rules or operating requirements that ordinarily apply to a
complete transmitter and the manufacturer must provide
adequate instructions along with the module to explain any
such requirements. A copy of these instructions must be
included in the application for equipment authorization.
(viil) The modular transmitter must comply with any applicable
                                                                      £1°




RF exposure requirements in its final configuration.




Signature:

Printed: Mars Ma


         (Mars (a

C:\Users\ADMINI~1\AppData\Local\Temp\Rar$DI1a0.051\Modular Approval Letter.docx



Document Created: 2018-04-24 09:29:37
Document Modified: 2018-04-24 09:29:37

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC