User Manual

FCC ID: 2AHKM-HIVE2200

Users Manual

Download: PDF
FCCID_4193948

Activate Your xFi Pods from the Xfinity xFi Mobile App This document provides step-by-step instructions on how you can activate your xFi Pods using the Xfinity xFi app for mobile devices. If you have additional questions about xFi Pods, please refer to our frequently asked questions. Note: Your xFi Gateway must be activated before you can set up your xFi Pods. Pods activation requires a supported mobile operating system; please see how to get started with Xfinity xFi for details. Before Activating Your xFi Pods 1. Download the Xfinity xFi mobile app free of charge from the App Store or Google Play. 2. Decide where you would like to place your Pods. To ensure the best signal and performance, please ensure that Pods are visible and not blocked by furniture or other large objects. Setting Requirements When you activate your xFi Pods, you may be prompted to make any of the below changes to your settings, if they are required. Note: If you make any changes to your WiFi network name or password, certain WiFi-based devices in your home may prompt you to enter in the new name/password before using the device.  One WiFi network name and password (i.e., you cannot have a separate WiFi network name and password for your 2.4 and 5 GHz radio bands). Your network still has both the 2.4 GHz and 5 GHz radio bands. This allows your Gateway to sort out the best connection at any given time for your devices.  A password to join your WiFi network (i.e., your WiFi Security Mode setting must be password-protected).  An enabled and broadcasting WiFi network (i.e., your WiFi network cannot be disabled through the Gateway's Admin Tool (10.0.0.1)).

Getting Started 1. Sign in with your Xfinity username and password. 2. Select More on the bottom right of your screen.

3. Select Xfinity Device under Add a Device. 4. Select xFi Pods.

5. Tap Get Started to begin activating your xFi Pods! Activate your xFi Pods 1. Plug in your first Pod to an active electrical outlet in your home. Note: o Ensure that at least one room separates the Pod and your xFi Gateway. o Do not connect your Pods directly to your xFi Gateway using the Ethernet port on the bottom of the Pod. The Pods connect wirelessly to the xFi Gateway. You will not be able to activate your Pods if one is connected directly to the Gateway. o Don't plug your Pods into power outlets that are controlled by a wall switch. o Make sure that your Pods are visible and not blocked by furniture or other large objects to ensure the best signal.

2. Select Next. 3. Hold your phone six to eight inches away from your first Pod to ensure that the xFi app can associate the Pods with your account and connect the first Pod to your Gateway.

4. Once your first Pod is connected, you will need to plug in your remaining Pods throughout your home. Make sure that your Pods are evenly spaced from each other and your Gateway. 5. Once the rest of your Pods have been plugged in, tap All Pods Ready to Go!

6. As your remaining Pods are plugged in, they will begin to come online. When all Pods have been connected, tap Name Your Pods. 7. You can name your Pods in any order. To do so, choose a Pod to name and hold your mobile device close to that Pod.

8. Once the app identifies which Pod you are naming, you will be presented with the option to assign the Pod a name. Enter a name and tap Confirm Name. Repeat steps five and six to name each remaining Pod.

9. Once naming is complete, tap Finish Setup. 10. The activation process is now complete! Over the next few days, your home WiFi network will be optimized. Note: Advanced Settings like WiFi Mode, Channel and Channel Width will now be managed automatically.

11. Tap OK to end the set-up. 12. When you return to the Overview screen on the xFi mobile app, a notification at the top of the screen will indicate that your Gateway and xFi Pods are Online.

You can also view your Pods in the Network tab after they have been activated. Note: Once your Pods are activated, the light on your device should stop flashing and remain off.

Cover / Finished size 成型尺寸 accordion fold / 風琴折 85 mm Federal Communication Commission Interference Statement 0440010306N0 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not 60 mm occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. Material: 80# Woodfree Paper / 80P模造紙 Face-up printing 正面印刷內容 Industry Canada Statement Federal Communication Commission FCC Caution: Any changes or modifications not expressly approved by Below statement for B2B3 (DFS) This device contains license-exempt transmitter(s)/receiver(s) that comply Interference Statement 0440010306N0 the party responsible for compliance could void the user’s authority to Dynamic Frequency Selection (DFS) for devices operating in the bands with Innovation, Science and Economic Development Canada’s operate this equipment. 5250- 5350 MHz, 5470-5600 MHz and 5650-5725 MHz. This equipment has been tested and found to comply with the limits for a license-exempt RSS(s). This device complies with Part 15 of the FCC Rules. Operation is subject For indoor use only. Class B digital device, pursuant to Part 15 of the FCC Rules. These limits Operation is subject to the following two conditions: to the following two conditions: (1) This device may not cause harmful are designed to provide reasonable protection against harmful interference (1) This device may not cause interference. Warning interference, and (2) this device must accept any interference received, in a residential installation. This equipment generates, uses and can (2) This device must accept any interference, including interference that Risk of electrical shock. Do not expose the device to water or moisture. including interference that may cause undesired operation. radiate radio frequency energy and, if not installed and used in may cause undesired operation of the device. The device is a high-performance communications device designed for For product available in the USA/Canada market, only channel 1~11 can accordance with the instructions, may cause harmful interference to radio For product available in the USA/Canada market, only channel 1~11 can home and office environments. Do not use the device outdoors. Keep be operated. Selection of other channels is not possible. communications. However, there is no guarantee that interference will not be operated. Selection of other channels is not possible. the device in an environment between 0°C ~ 40°C (32°F ~104°F). This device is restricted for indoor use. occur in a particular installation. If this equipment does cause harmful The device for operation in the band 5150–5250 MHz is only for indoor To avoid overheating, do NOT place any object on top of the device. Do interference to radio or television reception, which can be determined by IMPORTANT NOTE: use to reduce the potential for harmful interference to co-channel mobile not restrict the flow of air around the device. The manufacturer assumes turning the equipment off and on, the user is encouraged to try to correct FCC Radiation Exposure Statement: satellite systems. no liabilities for damage caused by any improper use of the device. the interference by one of the following measures: This equipment complies with FCC radiation exposure limits set forth for DISCLAIMER: ● Reorient or relocate the receiving antenna. IMPORTANT NOTE: an uncontrolled environment. This equipment should be installed and IC Radiation Exposure Statement: The manufacturer assumes no liabilities with respect to the contents of ● Increase the separation between the equipment and receiver. operated with minimum distance 20cm between the radiator & your body. this document. The manufacturer also reserves the right to revise this ● Connect the equipment into an outlet on a circuit different from that to This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed document or update the content thereof without any obligation to notify which the receiver is connected. any person of such revisions or amendments. Specifications subject to ● Consult the dealer or an experienced radio/TV technician for help. and operated with minimum distance 20cm between the radiator & your body. change without notice. Backside printing 背面印刷內容 Déclaration d’interférence de la Commission Avertissement de la FCC: Les changements ou modifications non expressément Déclaration d’Industrie Canada Déclaration pour B2B3 (DFS) Fédérale de Communication approuvés par la partie responsable de la conformité pourrait annuler Cet appareil contient des émetteurs / récepteurs exempts de licence qui sont La sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant l'autorisation de l’usager à utiliser cet équipement. conformes au (x) RSS (s) exemptés de licence d'Innovation, Sciences et dans les bandes 5250-5350 MHz, 5470-5600 MHz et 5650-5725 MHz. Cet équipement a été testé et jugé conforme aux limites d'un appareil Développement économique Canada. L'opération est soumise aux deux Cet appareil est conforme à la section 15 des règles de la FCC. Le Cet appareil doit être utilisé uniquement à l’intérieur numérique de classe B, conformément à la partie 15 des règles de la FCC. conditions suivantes : fonctionnement est soumis aux deux conditions suivantes: Ces limites sont conçues pour fournir une protection raisonnable contre les (1) l'appareil ne doit pas produire d’interférences nuisibles et (2) cet appareil (1) Cet appareil ne doit pas provoquer d'interférences. ATTENTION interférences nuisibles dans une installation résidentielle. Cet équipement (2) Cet appareil doit accepter toute interférence, y compris les interférences doit accepter toute interférence reçue, y compris les interférences qui peuvent Risque de choc électrique. Ne pas exposer l'appareil à l'eau ou à l'humidité. génère, utilise et peut émettre une énergie de radiofréquence et, si non installé causer un mauvais fonctionnement. susceptibles de provoquer un fonctionnement indésirable de l'appareil. L’appareil est un dispositif de communication de haute performance conçu pour et utilisé conformément aux instructions, peut causer des interférences Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal les environnements domestiques et de bureau. Ne pas utiliser l'appareil à nuisibles aux communications radio. Cependant, il n'y a aucune garantie que 1 à 11 peuvent être exploités. La sélection d'autres canaux n'est pas possible. 1 à 11 peuvent être exploités. La sélection d'autres canaux n'est pas possible. l'extérieur. Gardez l'appareil dans un environnement entre 0°C ~ 40°C l'interférence ne se produira pas dans une installation particulière. Si cet Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés Cet appareil doit être utilisé uniquement à l’intérieur (32°F ~ 104°F). Pour éviter la surchauffe, ne placez aucun objet sur le dessus appareil provoque des interférences nuisibles à la réception radio ou de uniquement pour une utilisation à l’intérieur afin de réduire les risques de de l'appareil. Ne pas restreindre la circulation d'air autour de l'appareil. Le télévision, qui peut être déterminé en mettant l'appareil hors tension, l'utilisateur REMARQUE IMPORTANTE: brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes fabricant décline toute responsabilité de dommages causés par une mauvaise est invité à essayer de corriger l'interférence par l'une des mesures suivantes: canaux. Déclaration de la FCC concernant l'exposition aux radiofréquences: utilisation de l'appareil. ● Réorienter ou déplacer l'antenne de réception. Cet équipement est conforme aux limites d'exposition aux rayonnements REMARQUE IMPORTANTE : AVERTISSEMENT : ● Augmenter la distance entre l'équipement et le récepteur. définies par la FCC pour un environnement non-contrôlé. Cet équipement doit Déclaration d'exposition aux radiations : Le fabricant décline toute responsabilité concernant le contenu de ce document. ● Branchez l'appareil dans une prise sur un circuit différent de celui auquel le être installé et utilisé à distance minimum de 20cm entre la source de Cet équipement est conforme aux limites d'exposition aux rayonnements IC Le fabricant se réserve le droit de réviser ce document ou mettre à jour le récepteur est connecté. rayonnement et votre corps. établies pour un environnement non contrôlé. Cet équipement doit être installé contenu de celui-ci sans aucune obligation de notifier toute personne de ces ● Consulter le revendeur ou un technicien radio/TV expérimenté. et utilisé avec un minimum de 20 cm de distance entre la source de révisions ou modifications. Spécifications sujettes à modification sans préavis. rayonnement et votre corps. Warning paper 0440010306N0 340Wx60Hmm 1A 80P模造紙 2018/11/13 Daisy Wang


Document Created: 2019-04-08 20:24:29
Document Modified: 2019-04-08 20:24:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC