Test Report BT LE

FCC ID: 2AHKM-HIVE2200

Test Report

Download: PDF
FCCID_4193921

...,..,...l “..I, FCC RADIO TEST REPORT Report No. : FR862827—02AD it »,//-;\\\\\ o Labermay Yhstubs® 1190 FCC RADIO TEST REPORT FCC ID 2AHKM—HIVE2200 Equipment 2x2 DBCC WiFi Extender Brand Name hitron Model Name HIXE12AWR Applicant Hitron Technologies Inc. No. 1—8, Li—Hsin 1st Rd. Hsinchu Science Park, Hsinchu 30078, Taiwan Manufacturer Hitron Technologies Inc. No. 1—8, Li—Hsin 1st Rd. Hsinchu Science Park, Hsinchu 30078, Taiwan Standard 47 CFR FCC Part 15.247 The product was received on Jan. 04, 2019, and testing was started from Jan. 08, 2019 and completed on Jan. 23, 2019. We, SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10—2013 and shown compliance with the applicable technical standards. The report must not be used by theclient to claim product certification, approval, or endorsement by TAF or any agency of government. The test results in this variant report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Lmaclole C f Approved by: Cliff Chang / SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886—3—656—9065 Page Number _: 1 of 24 FAX : 886—3—656—9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version _: 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD Table of Contents History of this test report.................................................................................................................................3 Summary of Test Result...................................................................................................................................4 1 General Description .............................................................................................................................5 1.1 Information..............................................................................................................................................5 1.2 Testing Applied Standards .....................................................................................................................9 1.3 Testing Location Information ..................................................................................................................9 1.4 Measurement Uncertainty ......................................................................................................................9 2 Test Configuration of EUT.................................................................................................................10 2.1 Test Channel Mode ..............................................................................................................................10 2.2 The Worst Case Measurement Configuration......................................................................................10 2.3 EUT Operation during Test ..................................................................................................................10 2.4 Accessories ..........................................................................................................................................10 2.5 Support Equipment...............................................................................................................................11 2.6 Test Setup Diagram .............................................................................................................................12 3 Transmitter Test Result .....................................................................................................................14 3.1 AC Power-line Conducted Emissions ..................................................................................................14 3.2 Maximum Conducted Output Power ....................................................................................................16 3.3 Emissions in Restricted Frequency Bands...........................................................................................19 4 Test Equipment and Calibration Data ..............................................................................................23 Appendix A. Test Results of AC Power-line Conducted Emissions Appendix B. Test Results of Maximum Conducted Output Power Appendix C. Test Results of Emissions in Restricted Frequency Bands Appendix D. Test Photos Photographs of EUT v01 TEL : 886-3-656-9065 Page Number : 2 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD History of this test report Report No. Version Description Issued Date FR862827-02AD 01 Initial issue of report Mar. 05, 2019 TEL : 886-3-656-9065 Page Number : 3 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD Summary of Test Result Report Ref Std. Result Test Items Remark Clause Clause (PASS/FAIL) 1.1.2 15.203 Antenna Requirement PASS - 3.1 15.207 AC Power-line Conducted Emissions PASS - 3.2 15.247(b) Maximum Conducted Output Power PASS - 3.3 15.247(d) Emissions in Restricted Frequency Bands PASS - Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Reviewed by: Cliff Chang Report Producer: Wendy Pan TEL : 886-3-656-9065 Page Number : 4 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 1 General Description 1.1 Information 1.1.1 RF General Information Frequency Range (MHz) Bluetooth Mode Ch. Frequency (MHz) Channel Number 2400-2483.5 LE 2402-2480 0-39 [40] Band Mode BWch (MHz) Nant 2.4-2.4835GHz BT-LE(1Mbps) 1.0 1TX Note:  Bluetooth LE uses a GFSK modulation for DSSS.  BWch is the nominal channel bandwidth.  Nss-Min is the minimum number of spatial streams.  Nant is the number of outputs. e.g., 2(2, 3) means have 2 outputs for port 2 and port 3. 2 means have 2 outputs for port 1 and port 2. TEL : 886-3-656-9065 Page Number : 5 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 1.1.2 Antenna Information Model Ant. Port Brand P/N Antenna Type Connector Gain (dBi) Name 1 1 Ethertronics XE1v2 - PCB Antenna I-PEX 2 2 Ethertronics XE1v2 - PCB Antenna I-PEX Note 3 1 PSA - RFECA3216060A1T CERAMIC Antenna N/A Note 1: Gain (dBi) Ant. Port WLAN 5G WLAN 5G WLAN 5G WLAN 5G WLAN 2.4G BT Band 1 Band 2 Band 3 Band 4 1 1 4.4 4.8 4.8 5.4 5.5 - 2 2 3.1 3.8 4.0 4.9 3.8 - 3 1 - - - 2.09 Note 2: The EUT has three antennas. Note 3: The above information was declared by manufacturer. <For 2.4GHz Band> For IEEE 802.11b/g/n mode (2TX/2RX) Port 1 and Port 2 can be used as transmitting/receiving antenna. Port 1 and Port 2 could transmit/receive simultaneously. <For 5GHz Band> For IEEE 802.11a/n/ac mode (2TX/2RX) Port 1 and Port 2 can be used as transmitting/receiving antenna. Port 1 and Port 2 could transmit/receive simultaneously. <For Bluetooth> For BT function (1TX/1RX) Only Port 1 can be used as transmitting/receiving antenna. TEL : 886-3-656-9065 Page Number : 6 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 1.1.3 Mode Test Duty Cycle Mode DC DCF(dB) T(s) VBW(Hz) ≥ 1/T BT-LE(1Mbps) 0.575 2.403 362.319u 3k Note:  DC is Duty Cycle.  DCF is Duty Cycle Factor. 1.1.4 EUT Operational Condition EUT Power Type Internal power supply Function Point-to-multipoint Point-to-point Test Software Version Telnet(v.25.1) LE 1M PHY: 1 Mb/s LE Coded PHY (S=2): 500 Kb/s Support Mode LE Coded PHY (S=8): 125 Kb/s LE 2M PHY: 2 Mb/s 1.1.5 Table for EUT support type Function support type AP Router Master Extender Master + Slave Mesh Master + Slave TEL : 886-3-656-9065 Page Number : 7 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 1.1.6 Table for Class II Change This product is an extension of original one reported under Sporton project number: FR862827AD Below is the table for the change of the product with respect to the original one. Modifications Performance Checking 1. Updating the hardware version to “SR3” from “SR2”. 1. AC Power-line Conducted Emissions The detail differences as below. 2. Maximum Conducted Output Power a) Updating the design for antenna. 3. Emissions in Restricted Frequency Bands b) Change LED to DIP lamp from SMD chip For above 1GHz after evaluating, the worst case is c) Removing the absorber of the device. found at BT-LE(1Mbps) CH0 (2402Hz) and retest d) Adding U4 and U4 related components on the mother board. this channel only. e) Change the opening size for pin header on the main frame. 2. Adding beamforming for Band 1 ~ Band 4. 3. Adding 5GHz band 2 and band 3 (5250~5350 There's no influence on this test report. MHz, 5470~5725 MHz) for this device. TEL : 886-3-656-9065 Page Number : 8 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 1.2 Testing Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  47 CFR FCC Part 15  ANSI C63.10-2013  FCC KDB 558074 D01 v05 1.3 Testing Location Information Testing Location HWA YA ADD : No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 FAX : 886-3-327-0973 JHUBEI ADD : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. TEL : 886-3-656-9065 FAX : 886-3-656-9085 Test Condition Test Site No. Test Engineer Test Environment Test Date RF Conducted TH01-CB Owen Hsu 25°C / 65% Jan. 15, 2019 ~ Jan. 23, 2019 Radiated 03CH01-CB RJ Huang 22°C / 54% Jan. 08, 2019 ~ Jan. 23, 2019 (Above 1GHz) Radiated 03CH01-CB RJ Huang 22°C / 54% Jan. 22, 2019 (Below 1GHz) AC Conduction CO02-CB Wei Li 25°C / 65% Jan. 14, 2019 Test site Designation No. TW0006 with FCC. Test site registered number IC 4086D with Industry Canada. 1.4 Measurement Uncertainty ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2) Test Items Uncertainty Remark Conducted Emission (150kHz ~ 30MHz) 2.0 dB Confidence levels of 95% Radiated Emission (30MHz ~ 1,000MHz) 3.6 dB Confidence levels of 95% Radiated Emission (1GHz ~ 18GHz) 3.7 dB Confidence levels of 95% Radiated Emission (18GHz ~ 40GHz) 3.5 dB Confidence levels of 95% Conducted Emission 1.7 dB Confidence levels of 95% Output Power Measurement 1.33 dB Confidence levels of 95% TEL : 886-3-656-9065 Page Number : 9 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 2 Test Configuration of EUT 2.1 Test Channel Mode Mode PowerSetting BT-LE(1Mbps) - 2402MHz Default 2.2 The Worst Case Measurement Configuration The Worst Case Mode for Following Conformance Tests Tests Item AC power-line conducted emissions Condition AC power-line conducted measurement for line and neutral Operating Mode 1 CTX-BT The Worst Case Mode for Following Conformance Tests Tests Item Maximum Conducted Output Power Test Condition Conducted measurement at transmit chains The Worst Case Mode for Following Conformance Tests Tests Item Emissions in Restricted Frequency Bands Test Condition Radiated measurement If EUT consist of multiple antenna assembly (multiple antenna are used in EUT regardless of spatial multiplexing MIMO configuration), the radiated test should be performed with highest antenna gain of each antenna type. The EUT was performed at Y axis and Z axis position for Emissions in Restricted Operating Mode < 1GHz Frequency Bands above 1GHz test, and the worst case was found at Y axis. So the measurement will follow this same test configuration. 1 CTX - EUT in Y axis-BT The EUT was performed at Y axis and Z axis position for Emissions in Restricted Frequency Bands test, and the worst case was found at Y axis. So the Operating Mode > 1GHz measurement will follow this same test configuration. 1 EUT in Y axis 2.3 EUT Operation during Test The EUT was programmed to be in continuously transmitting mode. 2.4 Accessories N/A TEL : 886-3-656-9065 Page Number : 10 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 2.5 Support Equipment For Test Site No: CO02-CB N/A For Test Site No: 03CH01-CB and TH01-CB Support Equipment No. Equipment Brand Name Model Name FCC ID A NB DELL E4300 N/A TEL : 886-3-656-9065 Page Number : 11 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 2.6 Test Setup Diagram Test Setup Diagram – AC Line Conducted Emission Test Item Connection Shielded Length 1 Power cable No 0.8m 2 RJ-45 cable No 1.5m TEL : 886-3-656-9065 Page Number : 12 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD Test Setup Diagram - Radiated Test Item Connection Shielded Length 1 Power cable No 1.8m 2 RJ-45 cable No 10m TEL : 886-3-656-9065 Page Number : 13 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 3 Transmitter Test Result 3.1 AC Power-line Conducted Emissions 3.1.1 AC Power-line Conducted Emissions Limit AC Power-line Conducted Emissions Limit Frequency Emission (MHz) Quasi-Peak Average 0.15-0.5 66 - 56 * 56 - 46 * 0.5-5 56 46 5-30 60 50 Note 1: * Decreases with the logarithm of the frequency. 3.1.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. 3.1.3 Test Procedures Test Method  Refer as ANSI C63.10-2013, clause 6.2 for AC power-line conducted emissions. TEL : 886-3-656-9065 Page Number : 14 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 3.1.4 Test Setup AC Power-line Conducted Emissions 1—Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 cm to 40 cm long. 2—The I/O cables that are not connected to an accessory shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. 3—EUT connected to one LISN. Unused LISN measuring port connectors shall be terminated in 50 Ω loads. LISN may be placed on top of, or immediately beneath, reference ground plane. 3.1—All other equipment powered from additional LISN(s). 3.2—A multiple-outlet strip may be used for multiple power cords of non-EUT equipment. 3.3—LISN at least 80 cm from nearest part of EUT chassis. 4—Non-EUT components of EUT system being tested. 5—Rear of EUT, including peripherals, shall all be aligned and flush with edge of tabletop. 6—Edge of tabletop shall be 40 cm removed from a vertical conducting plane that is bonded to the ground plane. 7—Antenna can be integral or detachable. If detachable, then the antenna shall be attached for this test. 3.1.5 Test Result of AC Power-line Conducted Emissions Refer as Appendix A TEL : 886-3-656-9065 Page Number : 15 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 3.2 Maximum Conducted Output Power 3.2.1 Maximum Conducted Output Power Limit Maximum Conducted Output Power Limit  If GTX ≤ 6 dBi, then POut ≤ 30 dBm (1 W)  Point-to-multipoint systems (P2M): If GTX > 6 dBi, then POut = 30 – (GTX – 6) dBm  Point-to-point systems (P2P): If GTX > 6 dBi, then POut = 30 – (GTX – 6)/3 dBm  Smart antenna system (SAS): - Single beam: If GTX > 6 dBi, then POut = 30 – (GTX – 6)/3 dBm - Overlap beam: If GTX > 6 dBi, then POut = 30 – (GTX – 6)/3 dBm - Aggregate power on all beams: If GTX > 6 dBi, then POut = 30 – (GTX – 6)/3 + 8dB dBm POut = maximum peak conducted output power or maximum conducted output power in dBm, GTX = the maximum transmitting antenna directional gain in dBi. 3.2.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. TEL : 886-3-656-9065 Page Number : 16 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 3.2.3 Test Procedures Test Method  Maximum Peak Conducted Output Power Refer as FCC KDB 558074, clause 8.3.1.1 & C63.10 clause 11.9.1.1 (RBW ≥ EBW method). Refer as FCC KDB 558074, clause 8.3.1.3 & C63.10 clause 11.9.1.3 (peak power meter).  Maximum Conducted Output Power [duty cycle ≥ 98% or external video / power trigger] Refer as FCC KDB 558074, clause 8.3.2.2 & C63.10 clause 11.9.2.2.2 Method AVGSA-1. Refer as FCC KDB 558074, clause 8.3.2.2 & C63.10 clause 11.9.2.2.3 Method AVGSA-1A. (alternative) duty cycle < 98% and average over on/off periods with duty factor Refer as FCC KDB 558074, clause 8.3.2.2 & C63.10 clause 11.9.2.2.4 Method AVGSA-2. Refer as FCC KDB 558074, clause 8.3.2.2 & C63.10 clause 11.9.2.2.5 Method AVGSA-2A (alternative) Refer as FCC KDB 558074, clause 8.3.2.2 & C63.10 clause 11.9.2.2.6 Method AVGSA-3 Refer as FCC KDB 558074, clause 8.3.2.2 & C63.10 clause 11.9.2.2.7 Method AVGSA-3A (alternative) Measurement using a power meter (PM) Refer as FCC KDB 558074, clause 8.3.2.3 & C63.10 clause 11.9.2.3.1 Method AVGPM (using an RF average power meter). Refer as FCC KDB 558074, clause 8.3.2.3 & C63.10 clause 11.9.2.3.2 Method AVGPM-G (using an gate RF average power meter).  For conducted measurement.  If the EUT supports multiple transmit chains using options given below: Refer as FCC KDB 662911, In-band power measurements. Using the measure-and-sum approach, measured all transmit ports individually. Sum the power (in linear power units e.g., mW) of all ports for each individual sample and save them.  If multiple transmit chains, EIRP calculation could be following as methods: Ptotal = P1 + P2 +… + Pn (calculated in linear unit [mW] and transfer to log unit [dBm]) EIRPtotal = Ptotal + DG TEL : 886-3-656-9065 Page Number : 17 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 3.2.4 Test Setup Maximum Conducted Output Power (Power Meter) 3.2.5 Test Result of Maximum Conducted Output Power Refer as Appendix B TEL : 886-3-656-9065 Page Number : 18 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 3.3 Emissions in Restricted Frequency Bands 3.3.1 Emissions in Restricted Frequency Bands Limit Restricted Band Emissions Limit Frequency Range (MHz) Field Strength (uV/m) Field Strength (dBuV/m) Measure Distance (m) 0.009~0.490 2400/F(kHz) 48.5 - 13.8 300 0.490~1.705 24000/F(kHz) 33.8 - 23 30 1.705~30.0 30 29 30 30~88 100 40 3 88~216 150 43.5 3 216~960 200 46 3 Above 960 500 54 3 Note 1: Test distance for frequencies at or above 30 MHz, measurements may be performed at a distance other than the limit distance provided they are not performed in the near field and the emissions to be measured can be detected by the measurement equipment. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor of 20 dB/decade (inverse of linear distance for field-strength measurements, inverse of linear distance-squared for power-density measurements). Note 2: Test distance for frequencies at below 30 MHz, measurements may be performed at a distance closer than the EUT limit distance; however, an attempt should be made to avoid making measurements in the near field. When performing measurements below30 MHz at a closer distance than the limit distance, the results shall be extrapolated to the specified distance by either making measurements at a minimum of two or more distances on at least one radial to determine the proper extrapolation factor or by using the square of an inverse linear distance extrapolation factor (40 dB / decade). The test report shall specify the extrapolation method used to determine compliance of the EUT. Note 3: Using the distance of 1m during the test for above 18 GHz, and the test value to correct for the distance factor at 3m. 3.3.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. TEL : 886-3-656-9065 Page Number : 19 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 3.3.3 Test Procedures Test Method  The average emission levels shall be measured in [duty cycle ≥ 98 or duty factor].  Refer as ANSI C63.10, clause 6.9.2.2 band-edge testing shall be performed at the lowest frequency channel and highest frequency channel within the allowed operating band.  For the transmitter unwanted emissions shall be measured using following options below:  Refer as FCC KDB 558074, clause 8.6 for unwanted emissions into restricted bands. Refer as FCC KDB 558074, clause 8.6 & C63.10 clause 11.12.2.5.1(trace averaging for duty cycle ≥98%). Refer as FCC KDB 558074, clause 8.6 & C63.10 clause 11.12.2.5.2(trace averaging + duty factor). Refer as FCC KDB 558074, clause 8.6 & C63.10 clause 11.12.2.5.3(Reduced VBW≥1/T). Refer as ANSI C63.10, clause 4.2.3.2.3 (Reduced VBW). VBW ≥ 1/T, where T is pulse time. Refer as ANSI C63.10, clause 4.2.3.2.4 average value of pulsed emissions. Refer as FCC KDB 558074, clause 8.6 & C63.10 clause 11.12.2.4 measurement procedure peak limit.  For the transmitter band-edge emissions shall be measured using following options below:  Refer as FCC KDB 558074 clause 8.7 & c63.10 clause 11.13.1, When the performing peak or average radiated measurements, emissions within 2 MHz of the authorized band edge may be measured using the marker-delta method described below.  Refer as FCC KDB 558074, clause 8.7 (ANSI C63.10, clause 6.10.6) for marker-delta method for band-edge measurements.  Refer as FCC KDB 558074, clause 8.7 for narrower resolution bandwidth (100kHz) using the band power and summing the spectral levels (i.e., 1 MHz).  For conducted unwanted emissions into restricted bands (absolute emission limits). Devices with multiple transmit chains using options given below: (1) Measure and sum the spectra across the outputs or (2) Measure and add 10 log(N) dB  For FCC KDB 662911 The methodology described here may overestimate array gain, thereby resulting in apparent failures to satisfy the out-of-band limits even if the device is actually compliant. In such cases, compliance may be demonstrated by performing radiated tests around the frequencies at which the apparent failures occurred. TEL : 886-3-656-9065 Page Number : 20 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 3.3.4 Test Setup Transmitter Radiated Emissions 9kHz ~30MHz 30MHz~1GHz TEL : 886-3-656-9065 Page Number : 21 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD Above 1GHz 3.3.5 Transmitter Radiated Unwanted Emissions (Below 30MHz) All amplitude of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. The radiated emissions were investigated from 9 kHz or the lowest frequency generated within the device, up to the 10 harmonic or 40 GHz, whichever is appropriate. 3.3.6 Transmitter Radiated Unwanted Emissions Refer as Appendix C TEL : 886-3-656-9065 Page Number : 22 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD 4 Test Equipment and Calibration Data Calibration Calibration Instrument Manufacturer Model No. Serial No. Characteristics Remark Date Due Date Conduction LISN Schwarzbeck NSLK 8127 8127650 9kHz ~ 30MHz Nov. 21, 2018 Nov. 20, 2019 (CO02-CB) Conduction LISN Schwarzbeck NSLK 8127 8127478 9kHz ~ 30MHz Nov. 05, 2018 Nov. 04, 2019 (CO02-CB) Conduction EMI Receiver Agilent N9038A MY52260140 9kHz ~ 8.4GHz Jan. 17, 2018 Jan. 16, 2019 (CO02-CB) 0.15MHz ~ Conduction COND Cable Woken Cable 2 Nov. 06, 2018 Nov. 05, 2019 (CO02-CB) 30MHz Conduction Software Audix E3 6.120210n - N.C.R. N.C.R. (CO02-CB) BILOG TESEQ & CBL6112D & 37880 & Radiation ANTENNA with 20MHz ~ 2GHz Aug. 27, 2018 Aug. 26, 2019 EMCI N-6-06 AT-N0609 (03CH01-CB) 6dB Attenuator Radiation Loop Antenna Teseq HLA 6120 24155 9kHz - 30 MHz Mar. 16, 2018 Mar. 15, 2019 (03CH01-CB) Radiation Horn Antenna EMCO 3115 00075790 750MHz ~ 18GHz Nov. 13, 2018 Nov. 12, 2019 (03CH01-CB) Radiation Horn Antenna Schwarzbeck BBHA 9170 BBHA9170252 15GHz ~ 40GHz Jun. 28, 2018 Jun. 27, 2019 (03CH01-CB) Radiation Pre-Amplifier EMCI EMC330N 980332 20MHz ~ 3GHz May 02, 2018 May 01, 2019 (03CH01-CB) Radiation Pre-Amplifier Agilent 8449B 3008A02310 1GHz ~ 26.5GHz Jan. 09, 2018 Jan. 08, 2019 (03CH01-CB) Radiation Pre-Amplifier Agilent 8449B 3008A02310 1GHz ~ 26.5GHz Jan. 08, 2019 Jan. 07, 2020 (03CH01-CB) Radiation Pre-Amplifier MITEQ TTA1840-35-HG 1864479 18GHz ~ 40GHz Jul. 04, 2018 Jul. 03, 2019 (03CH01-CB) Spectrum Radiation R&S FSP40 100080 9kHz~40GHz Oct. 03, 2018 Oct. 02, 2019 (03CH01-CB) analyzer EMI Test Radiation R&S ESCS 100359 9kHz ~ 2.75GHz Jul. 03, 2018 Jul. 02, 2019 (03CH01-CB) Receiver Low Radiation RF Cable-low Woken N/A 30 MHz ~ 1GHz Oct. 08, 2018 Oct. 07, 2019 (03CH01-CB) Cable-16+17 Radiation RF Cable-high Woken High Cable-16 N/A 1 GHz ~ 18GHz Oct. 08, 2018 Oct. 07, 2019 (03CH01-CB) High Radiation RF Cable-high Woken N/A 1 GHz ~ 18GHz Oct. 08, 2018 Oct. 07, 2019 (03CH01-CB) Cable-16+17 High Radiation RF Cable-high Woken N/A 18GHz ~ 40GHz Jul. 27, 2018 Jul. 26, 2019 (03CH01-CB) Cable-40G#1 High Radiation RF Cable-high Woken N/A 18GHz ~ 40GHz Jul. 27, 2018 Jul. 26, 2019 (03CH01-CB) Cable-40G#2 TEL : 886-3-656-9065 Page Number : 23 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR862827-02AD Calibration Calibration Instrument Manufacturer Model No. Serial No. Characteristics Remark Date Due Date Spectrum Conducted R&S FSV40 101027 9kHz~40GHz Jun. 22, 2018 Jun. 21, 2019 (TH01-CB) analyzer Conducted RF Cable-high Woken RG402 High Cable-06 1 GHz – 26.5 GHz Oct. 08, 2018 Oct. 07, 2019 (TH01-CB) Conducted RF Cable-high Woken RG402 High Cable-07 1 GHz –26.5 GHz Oct. 08, 2018 Oct. 07, 2019 (TH01-CB) Conducted RF Cable-high Woken RG402 High Cable-08 1 GHz –26.5 GHz Oct. 08, 2018 Oct. 07, 2019 (TH01-CB) Conducted RF Cable-high Woken RG402 High Cable-09 1 GHz –26.5 GHz Oct. 08, 2018 Oct. 07, 2019 (TH01-CB) Conducted RF Cable-high Woken RG402 High Cable-10 1 GHz –26.5 GHz Oct. 08, 2018 Oct. 07, 2019 (TH01-CB) Conducted Power Sensor Agilent U2021XA MY53410001 50MHz~18GHz Nov. 05, 2018 Nov. 04, 2019 (TH01-CB) Note: Calibration Interval of instruments listed above is one year. N.C.R. means Non-Calibration required. TEL : 886-3-656-9065 Page Number : 24 of 24 FAX : 886-3-656-9085 Issued Date : Mar. 05, 2019 Report Template No.: CB Ver1.0 Report Version : 01

AC Power Port Conducted Emission Result Appendix A Test Mode Mode 1 Frequency Range 0.15 MHz to 30 MHz Line SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory Page No. : 1 of 2

AC Power Port Conducted Emission Result Appendix A Neutral SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory Page No. : 2 of 2

AV Power-DTS Result Appendix B Summary Mode Power Power (dBm) (W) 2.4-2.4835GHz - - BT-LE(1Mbps) -6.92 0.00020 Result Mode Result Gain Power Power Limit (dBi) (dBm) (dBm) BT-LE(1Mbps) - - - - 2402MHz Pass 2.09 -6.92 30.00 SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory Page No. : 1 of 1

Radiated Emission below 1GHz Result Appendix C.1 Test Mode Mode 1 Frequency Range 30 MHz to 1,000 MHz Vertical 30 MHz to 1,000 MHz SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory Page No. : 1 of 2

Radiated Emission below 1GHz Result Appendix C.1 Horizontal 30 MHz to 1,000 MHz SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory Page No. : 2 of 2

RSE TX above 1GHz Result Appendix C.2 Summary Mode Result Type Freq Level Limit Margin Factor Dist Condition Azimuth Height Comments (Hz) (dBuV/m) (dBuV/m) (dB) (dB) (m) (°) (m) 2.4-2.4835GHz - - - - - - - - - - - - BT-LE(1Mbps) Pass AV 2.3828G 45.80 54.00 -8.20 33.08 3 Vertical 146 2.98 - SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory Page No. : 1 of 5

sronton cas. BT—LE(LMbps) morane 2402MHz_TX fuhd y 12— 100 s s Pa xo astae aske solse adte 2ofse aske salse ade 2oke sls radss ade ralse sibe rase aibe se sds malbso balze aman Sering Deaut onea iseacone) Toe Frea Te link Mn Fador DiX Condion: Rinuth Reght Conmens [ on uim dtovim) ) «o im 0 m x mnc sn no is se 0c Vertar us 2se > w uc se sn (sn se _0 Vertar us 2se > x moss is m ut 30 3 Vertar us 2se > w mos s m mt 30 03 Vertar us 2se >

sronton cas. BT—LE(LMbps) smormne 2402MHz_TX m LimPk [A/ 12— re [A7 1007 imA¥ |A/ s « w |[A7 ) ®4 e P zo rmhe rake salse adre raise 2mke naise se rake rle madss mde malse mibe ralse mibe ralse sls malso babke en sexing Deaut ocea iseacone) Toc Frea Te in Mign fador Di Condiion: Runuth heght Conmen [ on uim dtovim) ) «o im 0 m x rmme sieo mm asi mar c Hotzont ass z2s > w mm sn sn en se c Hotzont ass 225 > m rome soar w m e 0c Hotzont ass 225 > w ns pe w w ne c Hotzont ass 225 >

sronton cas. BT—LE(LMbps) wmovane 2402MHz_TX Bo— 16 26 so 46 se «6 6 s so nc mis ns ns uis nis ns we is is mc mis zis zic als mis emam seting Detut orsa iseacoun Toe Frea rel ~"limk Mn Fador —Oit Condion: Aueuth haght Conment (on uim dtovim) d «o im 0 im x imure uzse rew 2eze Tos > vetler o9 ann > w ssme Gses sim asae 705 s Vetlar 197 in —

sronton cas. BT—LE(LMbps) wmovane 2402MHz_TX Bo— 16 26 so a6 se s is sls me ie is me is mc ms rls zis sls ais o eman Seting Deaut ocea rseasoun Twe Frea tna tm Wagin Fader on Condtion| Armath Height Conments (on (owum (owum «o «o im o im x sss on moo asse ror Hotzont 357 107 — w ssouss 3532 sao asss 7os Hotzont 357 107 —


Document Created: 2019-04-08 20:28:27
Document Modified: 2019-04-08 20:28:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC