DTS-UNII Device Declaration letter

FCC ID: 2AHKM-CODA4782

Cover Letter(s)

Download: PDF
FCCID_3186272

Hitron Technologies Inc. No.1—8, Li—Hsin 1st Rd. Hsinchu Science Park, Hsinchu 30078, Taiwan DTS—UNII Device Declaration Letter Date: 2016/9/23 To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID: 2AHKM—CODA4T782 (1) DFS Device— [_] Master, [] Client with Radar detection capability, [] Client without radar detection capability, [X) N/A (2) Active / Passive Scanning , Ad hoc mode access point capability Active Scanning Passive 5 scanning (where Ad Hoc Mode or . Frequency Band (the device can rasa & Access point 8 the device is can WIFI Direct ds (MHz) transmit a probe list ty with bilit capability (beacon}) isten only wi capability no probes) 2412~2462MHz [ Yes, J No [] Yes, MX No Yes, [_] No Yes, No 2422~2452MHz [X] Yes, [] No [] Yes, [X No [ Yes, [] No Yes, [_] No 5§180~5240MHz [X] Yes, [_] No [_] Yes, [X No Yes, [_] No Yes, [_] No 5190~5230MHz Yes, [_] No [_] Yes, No Yes, [_] No Yes, [_] No 5210MHz Yes, [] No [] Yes, No Yes, [_] No Yes, [] No 5745~5825MHz EM Yes, [] No [] Yes, [ No [ Yes, [] No [ Yes, [] No 5755~5795MHz Yes, [_] No L] Yes, [ No M Yes, [] No [ Yes, [] No 5775MHz Yes, [_] No [] Yes, [X No [X] Yes, [_] No [X Yes, [| No (3) Country code selection ability — [_] Yes , [ No If yes, pls explain how it was implemented: (pls also help to provide detail of options for each country selection) (4) Meet 15.202 requirement — Yes, [_] No, pis check below: B A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. [] A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non—DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. [] Apply, BJ No Apply, (If apply, pis help to provide explanation on it was implement, and how software was controlled)

(6) Please help to provide justification how device was restricted to operate in 5600—5650MHz in below. Signature Contact Name¥ Job Title: Joe Chou / Senior Engineer Fax: 886—3—579—4635 Email: certification@hc.hitrontech.com


Document Created: 2016-10-24 14:46:49
Document Modified: 2016-10-24 14:46:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC