RF Exposure

FCC ID: 2AHJMMS120

RF Exposure Info

Download: PDF
FCCID_3480613

RF Exposure


Test Requirement:                    FCC 47CFR 15.247(i)
Test Date:                           2017-5-26
Mode of Operation:                   Tx mode


Requirements:


In 15.247(i), an equipment shall be operated in a manner that ensures that the public is not exposed to
radio frequency energy levels in excess of the limits in §§ 1.1310 and 2.1093 of this chapter.
Applications to the Commission for construction permits, licenses to transmit or renewals thereof,
equipment authorizations or modifications in existing facilities must contain a statement confirming
compliance with the limits unless the facility, operation, or transmitter is categorically excluded, as
discussed below. Technical information showing the basis for this statement must be submitted to the
Commission upon request.


According toKDB447498 D01 General RF Exposure Guidance v06, unless specifically required by the
published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR
evaluation for general population exposure conditions, by measurement or numerical simulation, is not
required when the corresponding SAR Exclusion Threshold condition.
Test Results:


RF Exposure Evaluation


The Maximum conducted output power = 0.64 mW (at frequency = 2.402 GHz)
It’s Conducted source-based time-averaging output power = 0.64 mW (at frequency = 2.402 GHz)


SAR Test Exclusion Thresholds=0.198≤ 3.0 for 1-g SAR,
The test separation distances is 5 mm
The power tune up tolerance is -0.94±1.0dBm
Max. duty factor is 100%



Document Created: 2017-06-01 11:32:12
Document Modified: 2017-06-01 11:32:12

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC