user manual

FCC ID: 2AHI6NIAEB37

Users Manual

Download: PDF
FCCID_3366151

FCC WARNINGS ADDITIONAL WARNINGS International Support Contact Information NOTE: This equipment has been tested and found to comply with To download this User’s Guide in English, Spanish, Website: www.iLiveElectronics.com • WARNING: To prevent fire or shock hazards, do not expose the limits for aClass B digital device, pursuant to part 15 of the FCC or French, or to get answers to frequently asked Email Support: prodinfo@dpiinc.com this unit to rain or moisture. Rules. These limits aredesigned to provide reasonable protection • WARNING : Where the mains plug or appliance coupler is questions, visit the support section at: Email Parts: partsinfo@dpiinc.com against harmful interference in aresidential installation. This equipment generates uses and can radiate radiofrequency energy used as the disconnect device, such disconnect device shall www.iLiveElectronics.com Phone Support: 1-888-999-4215 and, if not installed and used in accordance with the instructions,may remain readily operable. cause harmful interference to radio communications. However, • Lithium batteries, like all rechargeable batteries, are Para descargar este Manual del Usuario en Inglés, Warranty there is noguarantee that interference will not occur in a particular recyclable and should be recycled or disposed of according to Español y Francés, o para obtener respuestas a installation. If thisequipment does cause harmful interference to state and local guidelines. They should never be disposed of in preguntas frecuentes, visite la sección de apoyo en: For Warranty Information and the most radio or television reception, whichcan be determined by turning normal household waste and they should never be incinerated, www.iLiveElectronics.com up-to-date version of this User’s Guide, go to: the equipment off and on, the user is encouraged totry to correct the as they might explode. Contact your local government for www.iLiveElectronics.com. interference by one or more of the following measures: disposal or recycling practices in your area. Pour télécharger ce guide de l’utilisateur en Anglais, • WARNING: This product may contain chemicals known Espagnol ou Français, ou pour obtenir des réponses • Reorient or relocate the receiving antenna. to the State of California to cause birth defects, or other à des questions fréquemment posées, consultez la • Increase the separation between the equipment and receiver. reproductive harm (California Prop 65). Wash hands after rubrique d’assistance sur: • Connect the equipment into an outlet on a circuit different from handling. www.iLiveElectronics.com Made that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. • This product meets and complies with all Federal regulations. Green • To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your Changes or modifications not expressly approved by the party earbuds. After placing earbuds in/on your ears, gradually turn responsible for compliancecould void the user’s authority to up the volume until you reach a comfortable listening level. operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: Protect for Today Sustain for Tomorrow (1) this device may not cause harmful interference, and (2) this device must accept any interference received, Specifications are subject to change without notice. including interference that may cause undesired operation. Copyright © 2017 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property Wireless Stereo Earbuds of their respective owners. User’s Guide for Model IAEB37-1879-01

Features Overview & Controls Charging the Battery Pairing a Bluetooth Device Playing Audio Wirelessly • Bluetooth wireless Initial charge time is approximately 2 hours. Charge 1. While the unit is OFF, press and hold the 1. If the unit is OFF and has already been paired to a • Sweatproof fully before use. The low battery indicator will flash for Play/Pause/Speakerphone/Pair button for Bluetooth device, press and hold the Play/Pause/ Power / Pair / Play / Pause /Speakerphone 1 minute, then the unit will automatically power OFF. approximately 8-9 seconds until the indicator Speakerphone/Pair button for approximately • Wireless range: 33 feet light flashes red and blue. When pairing, remain 5-6 seconds until it automatically connects to Press and hold for 8-9 sec. to power ON and begin pairing. 1. Using a Micro-USB to USB cable (included), • Voice prompts announce earbud operations Press and hold for 5-6 sec. to power ON/OFF. connect to the USB port of a powered on within 3 feet of the unit. your device. An audible chime will sound and the • Built-in microphone computer or USB power adaptor to charge. 2. Using the controls on your Bluetooth device, LED indicator will turn solid blue. Press to play/pause audio or answer/end a phone call. • Micro-USB port for battery recharge select IAEB37 in your Bluetooth settings to pair. 2. Use the controls on the connected Bluetooth If your device requests a password, enter the default device to select and play audio. • DC battery power: built-in rechargeable battery password 0 0 0 0 . Refer to the user’s manual for 3. To play or pause audio, press the Play/Pause • Battery life: approx. 4 hrs your specific device for specific instructions on button or use the controls on the connected pairing to Bluetooth devices. Bluetooth device. Includes 3. When successfully paired, an audible chime will • 3 sets of eartips sound and the LED indicator will slowly flash Using the Speakerphone Volume blue. Audio from the connected Bluetooth device • Micro-USB to USB charging cable should now be heard through the earbuds, use 1. To accept a call, press the Speakerphone button the controls on the connected Bluetooth device or use the controls on the connected phone. • User’s guide to select and play audio. 2. To end a call, press the Speakerphone button or After initial pairing, the unit will stay paired unless use the controls on the connected phone. Power Status Indicator Light unpaired manually by the user or erased due to a reset 3. To re-dial the last dialed number, press the Power ON Flashing blue light of the device. Repeat these steps if your device should Speakerphone button twice. become unpaired or will not connect normally. Low Battery Flashing red light DC Power Input Charging Solid Red light Bluetooth Status Indicator Light Finished Charging Solid Blue light Pairing Bluetooth Flashing red and blue lights Successfully Paired Slowly flashing blue light


Document Created: 2017-04-06 16:17:27
Document Modified: 2017-04-06 16:17:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC