Test Report

FCC ID: 2AHGJJMSHZ0500-27-1

Test Report

Download: PDF
FCCID_4406560

FCC PART 15.227 MEASUREMENT AND TEST REPORT For JM Manufacturing (HK) Ltd. Unit G, 4/F Kaiser Estate, Phase 2, No. 47-53 Man Yue Street, Hung Hom, Kowloon, Hong Kong FCC ID: 2AHGJJMSHZ0500-27-1 Report Type: Product Type: Original Report 1:24 new RC car (27MHz Remote controller) Report Number: RSZ190708831-00 Report Date: 2019-07-16 Simon Wang Reviewed By: RF Engineer Test Laboratory: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*”. The information marked # is provided by the applicant, the laboratory is not responsible for its authenticity.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190708831-00 TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 TEST FACILITY .............................................................................................................................................................4 SYSTEM TEST CONFIGURATION ..........................................................................................................................5 JUSTIFICATION .............................................................................................................................................................5 EUT EXERCISE SOFTWARE ..........................................................................................................................................5 EQUIPMENT MODIFICATIONS .......................................................................................................................................5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................5 SUMMARY OF TEST RESULTS ...............................................................................................................................6 TEST EQUIPMENT LIST ...........................................................................................................................................7 FCC§15.203 - ANTENNA REQUIREMENT..............................................................................................................8 APPLICABLE STANDARD ..............................................................................................................................................8 ANTENNA CONNECTOR CONSTRUCTION ......................................................................................................................8 FCC§15.205, §15.209, §15.227(A), §15.227 (B) – FIELD STRENGTH AND RESTRICTED BAND EMISSIONS ...................................................................................................................................................................9 APPLICABLE STANDARD ..............................................................................................................................................9 MEASUREMENT UNCERTAINTY ....................................................................................................................................9 EUT SETUP ..................................................................................................................................................................9 EMI TEST RECEIVER SETUP .......................................................................................................................................10 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................10 TEST DATA ................................................................................................................................................................10 FCC§15.215(C) - 20DB EMISSION BANDWIDTH ................................................................................................13 APPLICABLE STANDARD ............................................................................................................................................13 TEST PROCEDURE ......................................................................................................................................................13 TEST DATA ................................................................................................................................................................13 FCC Part 15.227 Page 2 of 14

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190708831-00 GENERAL INFORMATION Product Description for Equipment under Test (EUT) Product 1:24 new RC car (27MHz Remote controller) Model JMS-HZ0500 UPC Number# 192234033531 Voltage Range DC 1.5V*2 AA batteries Date of Test 2019/07/13 Sample serial number 190708831 Received date 2019/07/08 Sample/EUT Status Good condition Objective This report is prepared on behalf of JM Manufacturing (HK) Ltd. in accordance with Part 2-Subpart J, and Part 15-Subparts A and C of the Federal Communication Commission’s rules. The objective is to determine the compliance of EUT with FCC rules, section 15.203, 15.205, 15.209, 15.215 and 15.227. Related Submittal(s)/Grant(s) No related submittal(s). Test Methodology All measurements contained in this report were conducted with ANSI C63.10-2013, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices. All emissions measurement was performed at Bay Area Compliance Laboratories Corp. (Shenzhen). The radiated testing was performed at an antenna-to-EUT distance of 3 meters. Measurement uncertainty with radiated emission is 4.75 dB for 30MHz-1GHz, and 4.88 dB for above 1GHz, 1.95dB for conducted measurement. FCC Part 15.227 Page 3 of 14

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190708831-00 Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Shenzhen) to collect test data is located on the 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China. The test site has been approved by the FCC under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 342867, the FCC Designation No. : CN1221. The test site has been registered with ISED Canada under ISED Canada Registration Number 3062B. FCC Part 15.227 Page 4 of 14

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190708831-00 SYSTEM TEST CONFIGURATION Justification The system was configured for testing in a typical mode. EUT Exercise Software No exercise software was used. Equipment Modifications No modifications. Block Diagram of Test Setup 1.0 Meter EUT Non-Conductive Table 80 cm above Ground Plane 1.5 Meters FCC Part 15.227 Page 5 of 14

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190708831-00 SUMMARY OF TEST RESULTS FCC Rules Description of Test Result §15.203 Antenna requirement Compliance §15.207 Conducted Emissions Not Applicable §15.205, §15.209, Field Strength and Restricted Compliance §15.227(a), §15.227(b) Band Emissions §15.215(c) 20dB Emission Bandwidth Compliance Not Applicable: The EUT is powered by battery. FCC Part 15.227 Page 6 of 14

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190708831-00 TEST EQUIPMENT LIST Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Sonoma Instrument Amplifier 310N 186238 2018-11-12 2019-11-12 1316.3003K0 Rohde & Schwarz EMI Test Receiver ESR 2019-07-11 2020-07-11 3-101746-zn Sunol Sciences Broadband Antenna JB1 A040904-1 2017-12-22 2020-12-21 ETS Passive Loop Antenna 6512 29604 2018-07-14 2021-07-13 TDK Chamber Chamber A 2# 2018-09-20 2021-09-19 UTiFLEX MICRO- UFA147A- MFR64639 RF Cable 2018-11-12 2019-11-12 C0AX 2362-100100 231029-003 Ducommun RF Cable 104PEA 218124002 2018-11-12 2019-11-12 Technologies * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to requirements that traceable to National Primary Standards and International System of Units (SI). FCC Part 15.227 Page 7 of 14

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190708831-00 FCC§15.203 - ANTENNA REQUIREMENT Applicable Standard An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. Antenna Connector Construction The EUT has an integral antenna arrangement, which was permanently attached and the antenna gain is 2.5 dBi, fulfill the requirement of this section. Please refer to EUT photos. Result: Compliant. FCC Part 15.227 Page 8 of 14

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190708831-00 FCC§15.205, §15.209, §15.227(a), §15.227 (b) – FIELD STRENGTH AND RESTRICTED BAND EMISSIONS Applicable Standard According to FCC §15.227 (a), the field strength if any emission within this band shall not exceed 10,000 microvolts/meter at 3 meters. (b) The field strength of any emissions which appear outside of this band shall not exceed the general radiated emission limits in §15.209. Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in field of EMC. The factors contributing to uncertainties are spectrum analyzer, cable loss, antenna factor calibration, antenna directivity, antenna factor variation with height, antenna phase center variation, antenna factor frequency interpolation, measurement distance variation, site imperfections, mismatch (average), and system repeatability. Based on CISPR 16-4-4, The Treatment of Uncertainty in EMC Measurements, the best estimate of the uncertainty of a radiation emissions measurement at Bay Area Compliance Laboratories Corp. (Shenzhen) is 4.0 dB.(k=2, 95% level of confidence), and the uncertainty will not be taken into consideration for all the test data recorded in the report. EUT Setup The radiated emission tests were performed in the 3 meters, using the setup accordance with the ANSI C63.10-2013. The specification used was the FCC Part 15.205 and 15.209 and 15.227 limits. FCC Part 15.227 Page 9 of 14

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190708831-00 EMI Test Receiver Setup The system was investigated from 9 kHz to 1000 MHz. Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Loss and Cable Loss, and subtracting the Amplifier Gain from the Meter reading. The basic equation is as follows: Corrected Amplitude = Meter Reading + Correction Factor Correction Factor = Antenna Loss + Cable Loss - Amplifier Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin calculation is as follows: Margin = Limit – Corrected Amplitude Test Data Environmental Conditions Temperature: 25 ℃ Relative Humidity: 52 % ATM Pressure: 101.0 kPa Testing was performed by Andy Yu on 2019-07-13. Test mode: Transmitting (Scan with X-AXIS, Y-AXIS, Z-AXIS, the worst case was recorded) FCC Part Frequency Corrected Turntable Rx Antenna Corrected Detector 15.227&15.205&15.209 Amplitude Factor Remark (PK/QP/AV) Height Limit Margin (MHz) (dBμV/m) Degree Polar (dB) (m) (dBμV/m) (dB) 27.145 68.71 PK 118 1 H 30.3 100 31.29 Fundamental 27.145 64.45 Ave. 118 1 H 30.3 80 15.55 0.0091 39.87 PK 118 1 H 66.7 128.42 88.55 0.172 50.87 PK 118 1 H 62.3 102.89 52.02 Spurious 26.96 49.74 QP 118 1 H 30.3 69.54 19.8 emission 27.28 49.64 QP 118 1 H 30.3 69.54 19.9 Note: PK detector data compliance with average detector limit. FCC Part 15.227 Page 10 of 14

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190708831-00 9 KHz-150 KHz 150 KHz-30MHz Fundamental FCC Part 15.227 Page 11 of 14

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190708831-00 30 MHz~1 GHz 80 70 60 Electric Field Strength QP-3m 50 Level in dB¦ÌV/ 40 30 20 10 0 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Corrected Antenna Turntable Correction Frequency Antenna Limit Margin Amplitude height position Factor (MHz) Polarity (dBμV/m) (dB) (dBμV/m) (cm) (degree) (dB/m) 271.499875 36.19 110.0 H 92.0 -12.6 46.00 9.81 298.647875 35.49 108.0 H 98.0 -10.7 46.00 10.51 352.963375 30.39 108.0 H 94.0 -10.8 46.00 15.61 595.724000 19.32 212.0 V 237.0 -1.9 46.00 26.68 840.569500 28.78 239.0 H 310.0 6.0 46.00 17.22 938.104375 29.85 399.0 H 31.0 8.6 46.00 16.15 Note: Corrected Amplitude = Corrected Factor + Reading Corrected Factor=Antenna factor（RX）+cable loss – amplifier factor Margin = Limit- Corr. Amplitude Result: Compliance FCC Part 15.227 Page 12 of 14

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190708831-00 FCC§15.215(c) - 20dB EMISSION BANDWIDTH Applicable Standard Intentional radiators operating under the alternative provisions to the general emission limits, as contained in § 15.217 through 15.257 and in Subpart E of this part, must be designed to ensure that the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. Test Procedure 1. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. 2. Position the EUT without connection to measurement instrument. Turn on the EUT and connect it to measurement instrument. Then set it to any one convenient frequency within its operating range. Set a reference level on the measuring instrument equal to the highest peak value. 3. Measure the frequency difference of two frequencies that indicated 20dB bandwidth. 4. Repeat above procedures until all frequencies measured were complete. Test Data Environmental Conditions Temperature: 25 ℃ Relative Humidity: 52 % ATM Pressure: 101.0 kPa Testing was performed by Andy Yu on 2019-07-13. Test Mode: Transmitting Please refer to the following plots. FCC Part 15.227 Page 13 of 14

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190708831-00 Fl(MHz) Fh (MHz) Permitted frequency range(MHz) Result 27.140370 27.160050 26.96-27.28MHz Compliant ****END OF REPORT**** FCC Part 15.227 Page 14 of 14


Document Created: 2019-08-20 14:05:47
Document Modified: 2019-08-20 14:05:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC