Users Manual

FCC ID: 2AHDSBR200-01

Users Manual

Download: PDF
FCCID_4212123

TheatPubc Extender Set Theat Pusbc Extender FAQ Quick Start Guide Db +# How does the Extender work? When the Extenderisturned on, it wll take any signals from nearby MeatProbe and amplify and rebroadcest the signal Just turn it on and place it nearby as you get your cook on. Step 1 | Download Step 2 | Power Step 3 | Setup Dovnload MeatProbe app on108 or use theincuded meroUSHcableto Launch MeatProbe app and folow the How close does the Extender need to be to MeatProbe? Androd toyoursmart devce powerthe Chargervth MeatProbe instctons tsetupan accountand Idealy, the closer the beter. Tto set it somewshere nearby, shaded, and open without covering it up. If yeu do need to Insert 2 MA batteis io the Etender your MestProbe cover it up to pretect against rain odirect sunlight, don‘t cover t up with anything metal as that willaffect the signal (btteresnotincluded) range. What happens if I don‘t use the Extender? MeatProbe itself wl work without the Extenderhowever,range of the signal wllbe greatly imited depencing on if MeatProbe is enclosed A’, Is there an optimal placement method? Step 4 | Extender Step 5 | MeatProbe Step 6 | Let‘s Coold Yes! To maximize the range,itbest to have the Extenderstanding up facing the diection you‘dlie to receive the signal. If you do use the attached magnet to place on your oven/gil, do make sure i is not placed on a surface that gets hot. /8 ‘The Extenderis meant to be placed in 1t recommended tocharge MestProbe h eventhing setupand ready to go the vioity of MeatProbe. Whenyoue foratleast an hour before tfrst use add arecipe in the appand get cooking readyto cook, suttch i on,place t reatby.and youre good tgo Erjoy youperfecty cooked meat up to 300#t/100m up to 100ft /38m Any questions or problems? Visit us at http://www.grandex.com.tw/support

加a1. � Extender 加a1. � Extender FCC Statement This equipment has been tested and found to comp,y with the limits for a Class B digital device. This device complies with pa内 ’15 of the FCC Rules. Operation is subject to the following two pu 「suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable conditions: protection against harmful interference in a residential installation. This equipment generates （ ’I} This device may not cause harmful interference. and (2) this device must accept any uses and can radiate radio frequency energy and, if not installed and used in accordance with interference 「eceived, including inte『ference that may cause undesired operation. the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occu 「 in a particular installation. If this equipment does Changes or modifications not expressly approved by the party responsible for compliance cause harmful inte 『ierence to radio or television reception. which can be determined by turning could void the user's authority to operate the equipment. the equipment o仔and on, the user is encouraged to try to correct the interference by one or more of the following measures: RF Exposure -- Reo『ient or relocate the receiving antenna. To maintain compliance with FCC’S RF Exposure guidelines. This device and its antenna(s} -- Increase the separation between the equipment and receiver. must not be co-located or operation in conjunction with any other antenna or transmitter. …Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 一 Consult the dealer or an experienced radio/TV technician for help


Document Created: 2019-03-23 14:56:42
Document Modified: 2019-03-23 14:56:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC