RF Exposure

FCC ID: 2AHCR-IT83X

RF Exposure Info

Download: PDF
FCCID_4402256

Bay Area Compliance Laboratories Corp. (Dongguan)                             Report No.:RXM190124053-00C

FCC §15.247 (i) & §1.1310 & §2.1091- MAXIMUM PERMISSIBLE
EXPOSURE (MPE)
Applicable Standard
According to subpart 15.247(i)and subpart §1.1310, systems operating under the provisions of this section
shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in
excess of the Commission’s guidelines.

Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091)

                          (B) Limits for General Population/Uncontrolled Exposure
Frequency Range         Electric Field       Magnetic Field        Power Density              Averaging Time
     (MHz)             Strength (V/m)        Strength (A/m)           (mW/cm2)                  (minutes)
    0.3–1.34                 614                   1.63                 *(100)                      30
    1.34–30                 824/f                 2.19/f               *(180/f²)                    30
    30–300                   27.5                 0.073                   0.2                       30
   300–1500                   /                      /                  f/1500                      30
 1500–100,000                 /                      /                    1.0                       30

f = frequency in MHz; * = Plane-wave equivalent power density;

According to §1.1310 and §2.1091 RF exposure is calculated.


Calculation formula:

Prediction of power density at the distance of the applicable MPE limit
S = PG/4R² = power density (in appropriate units, e.g. mW/cm2);
P = power input to the antenna (in appropriate units, e.g., mW);
G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain
factor, is normally numeric gain;
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm);


Calculated Data:

                                                     Conducted
                                                   output power      Evaluation      Power         MPE
                Frequency      Antenna Gain
     Mode                                         including Tune-     Distance      Density        Limit
                  (MHz)
                                                    up Tolerance       (cm)        (mW/cm2)      (mW/cm2)
                             (dBi)    (numeric)   (dBm) (mW)
     Wi-Fi      2412-2462     1.2        1.32        24    251.19        20          0.0659         1.0
    Bluetooth
                2402-2480      1.2      1.32         7       5.01        20          0.0013         1.0
       LE
    Bluetooth   2402-2480      1.2      1.32         7       5.01        20          0.0013         1.0

Note: All modes can’t transmit simultaneously.


Result: The device meet FCC MPE at 20 cm distance




                                                                                                  Page 14 of 59



Document Created: 2019-08-09 15:10:13
Document Modified: 2019-08-09 15:10:13

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC