Users Manual

FCC ID: 2AHAY-SR6G1601

Users Manual

Download: PDF
FCCID_2890631

Disclaimer
Thank you for purchasing the X5R READER (hereinafter referred to as“product”). Read this disclaimer carefully
before using this product. By using this product, you hereby agree to this disclaimer and signify that you have
read it fully. Please install and use this product in strict accordance with the User Manual. SZ DJI BaiWang
Technology Co., Ltd. and its affiliated companies assume no liability for damage(s) or injuries incurred directly
or indirectly from using, installing or refitting this product improperly, including but not limited to using non-
designated accessories.
DJI is the registered trademark of SZ DJI BaiWang Technology Co., Ltd. (abbreviated as “DJI”). Names of
products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective
owner companies. This product and manual are copyrighted by DJI with all rights reserved. No part of this
product or manual shall be reproduced in any form without the prior written consent of or authorization from
DJI.
This disclaimer is produced in various languages. In the event of variance among different versions, the Chinese
version shall prevail when the product in question is purchased in Mainland China, and the English version shall
prevail when the product in question is purchased in any other region.


Warnings
1.      DO NOT connect this product to a USB interface of a version less than 3.0.
2.      Only use genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI-certified
        manufacturers may cause system malfunctions and compromise safety.
3.      Ensure the X5R READER and its components are free of foreign objects (water, oil, soil, sand, etc.).


About
DJI X5R READER is an adapter for export the video data from DJI X5R SSD to the device installed with DJI
CineLight, videos, enabling high-end filmmakers to easily edit and process the videos.


Usage
Insert the X5R SSD into the X5R READER correctly, then connect the X5R READER to a device with DJI
CineLight installed via the USB 3.0 cable. Video can be exported by the DJI CineLight. Refer to the Zenmuse
X5R user manual for more DJI CineLight details.




LED Indicator
     Power LED                                                  Working Status LED
     Off          Disconnect to the power or X5R SSD not        Off              Read and write not in progress
                  insert into the X5R READER.
     Solid blue   Power connection is normal and X5R SSD        Blue blinking    Read and write is functioning
                  is inserted into the X5R READER correctly,


Specifications
Dimensions: 72 mm x 56 mm x 15 mm
Weight: 70 g
Operating temperature: 0℃ ~ 40℃


FCC Warning Message

Any Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.



This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.



Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.



Document Created: 2019-07-06 14:59:46
Document Modified: 2019-07-06 14:59:46

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC