RF Exposure Report

FCC ID: 2AH4HVZASSETCM1

RF Exposure Info

Download: PDF
FCCID_4505887

MPE TEST REPORT Applicant Quectel Wireless Solutions Co., Ltd FCC ID XMR201705BG96NA Product LTE Cat M1 Module Brand Quectel Model BG96-NA Report No. R1907A0353-M1 Issue Date August 2, 2019 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC 47 CFR Part 1 1.1310. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Yu Wang Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000

MPE Test Report Report No: R1907A0353-M1 Table of Contents 1 Test Laboratory .............................................................................................................................. 3 1.1 Notes of the Test Report ......................................................................................................... 3 1.2 Test facility .............................................................................................................................. 3 1.3 Testing Location ...................................................................................................................... 4 1.4 Laboratory Environment .......................................................................................................... 4 2 Description of Equipment under Test ............................................................................................. 5 3 Maximum conducted output power (measured) and antenna Gain ................................................ 6 ANNEX A： The EUT Appearance ..................................................................................................... 10 A.1 EUT Appearance ....................................................................................................................... 10 ANNEX B: Product Change Description .............................................................................................. 11 TA Technology (Shanghai) Co., Ltd. Page 2 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1907A0353-M1 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. This report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. 1.2 Test facility CNAS (accreditation number:L2264) TA Technology (Shanghai) Co., Ltd. has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS). FCC (recognition number is 428261) TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. IC (recognition number is 8510A) TA Technology (Shanghai) Co., Ltd. has been listed by industry Canada to perform electromagnetic emission measurement. VCCI (recognition number is C-4595, T-2154, R-4113, G-766) TA Technology (Shanghai) Co., Ltd. has been listed by industry Japan to perform electromagnetic emission measurement. A2LA (Certificate Number: 3857.01) TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform electromagnetic emission measurement. TA Technology (Shanghai) Co., Ltd. Page 3 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1907A0353-M1 1.3 Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: xukai@ta-shanghai.com 1.4 Laboratory Environment Temperature Min. = 18C, Max. = 25 C Relative humidity Min. = 30%, Max. = 70% Ground system resistance < 0.5  Ambient noise is checked and found very low and in compliance with requirement of standards. Reflection of surrounding objects is minimized and in compliance with requirement of standards. TA Technology (Shanghai) Co., Ltd. Page 4 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1907A0353-M1 2 Description of Equipment under Test Client Information Applicant Quectel Wireless Solutions Co., Ltd Building 5, Shanghai Business Park Phase III (Area B), No.1016 Applicant address Tianlin Road, Minhang District, Shanghai, China 200233 Manufacturer Quectel Wireless Solutions Co., Ltd Building 5, Shanghai Business Park Phase III (Area B), No.1016 Manufacturer address Tianlin Road, Minhang District, Shanghai, China 200233 General Technologies Model: Quectel BG96-NA IMEI: 864508030799925 Hardware Version: R1.0 Software Version: BG96NAMAR02A09M1G The EUT don’t have standard Antenna, The Antenna used for testing in Antenna Type: this report is the after-market accessory (Dipole Antenna) Antenna Gain: The Maximum Antennea Gain(4dBi) is declared by manufacturer Test Date： May 15, 2017 ~ May 17, 2017 and July 10, 2019 ~ July 19, 2019 Accessory equipment Evaluation Board RF Cable RS232-to-USB Cable Antenna: Dipole Antenna Headset USB Cable BG96-NA (Report No.:R1907A0353-M1) is a variant model of BG96-NA (Report No.: RXA1705-0129MPE01R1). This report adds LTE band 2 and LTE band 12. The detailed product change description please refers to the ANNEX B. TA Technology (Shanghai) Co., Ltd. Page 5 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1907A0353-M1 3 Maximum conducted output power (measured) and antenna Gain the numeric gain (G) of the antenna with a gain specified in dB is determined by Numeric gain (G)=10^(antenna gain/10) Maximum Conducted Output Antenna Gain Numeric gain Band Power (dBm) (dBi) (dB) LTE Band 2 25.7 4 2.512 LTE Band 4 25.7 4 2.512 LTE Band 12 25.7 4 2.512 LTE Band 13 25.7 4 2.512 TA Technology (Shanghai) Co., Ltd. Page 6 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1907A0353-M1 According to section 1.1310 of FCC 47 CFR Part 1, limits for maximum permissible exposure (MPE) are as following Note1. Occupational/controlled limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when an individual is transient through a location where occupational / controlled limits apply provided he or she is made aware of the potential for exposure. Note2: General population/uncontrolled exposures apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or can not exercise control over their exposure. TA Technology (Shanghai) Co., Ltd. Page 7 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1907A0353-M1 The maximum permissible exposure for 300~1500MHz is f/1500, 1500~100,000MHz is 1.0.So Band The maximum permissible exposure LTE Band 2 1.0mW/cm2 LTE Band 4 1.0mW/cm2 LTE Band 12 0.470mW/cm2 LTE Band 13 0.523mW/cm2 Maximum Conducted EIRP Power density Limit Final Margin1 Margin2 Band Output limit Margin (dB) (dB) Power (dBm) (mW/cm2) (dBm) (dB) (dBm) LTE Band 2 25.7 33.000 7.300 1.000 37.013 11.313 7.300 LTE Band 4 25.7 30.000 4.300 1.000 37.013 11.313 4.300 LTE Band 12 25.7 36.920 11.220 0.470 33.734 8.033 8.033 LTE Band 13 25.7 36.920 11.220 0.523 34.198 8.497 8.497 Note: 1. The Maximum allowed antenna gain per Band should be less than or equal to the Final Margin which is the allowable maximum gain value to comply with limits for maximum permissible exposure (MPE). 2. The Final Margin is determined and selected to the worst-case of Margin1 and Margin2. 3. Margin1=EIRP Limit(dBm)-Maximum Conducted Power (dBm). EIRP limit reference standard part22/ part24/part27and part90 for each band, EIRP = ERP + 2.15 (dB). 4. Margin2=Power density Limit(dBm)-Maximum Conducted Power (dBm). Power density Limit(dBm): The max. obtained by MPE with 20cm. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. No change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. TA Technology (Shanghai) Co., Ltd. Page 8 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1907A0353-M1 RF Exposure Calculations: The following information provides the minimum separation distance for the highest gain antenna provided. This calculation is based on the conducted power, considering maximum power and antenna gain. The formula shown in KDB 447498 D01 is used in the calculation. Equation from KDB 447498 D01 General RF Exposure Guidance v06 (10/23/2015) is: 2 S= PG / 4∏R 2 Where: S = power density (in appropriate units, e.g. mW/cm ) P = Time-average maximum tune up procedure (in appropriate units, e.g., mW) G = the numeric gain of the antenna R = distance to the center of radiation of the antenna (20 cm = limit for MPE) Test Result Limit Value Band PG (mW) 2 2 Conclusion (mW/cm ) (mW/cm ) LTE Band 2 1995.262 0.3969 1.000 Pass LTE Band 4 1000.000 0.1989 1.000 Pass LTE Band 12 2362.109 0.4699 0.470 Pass LTE Band 13 2628.452 0.5229 0.523 Pass Note: R = 20cm ∏= 3.1416 Note: For transmitters, minimum separation distance is 20cm, even if calculations indicate MPE distance is less. TA Technology (Shanghai) Co., Ltd. Page 9 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1907A0353-M1 ANNEX A： The EUT Appearance A.1 EUT Appearance Picture 1 EUT TA Technology (Shanghai) Co., Ltd. Page 10 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

MPE Test Report Report No: R1907A0353-M1 ANNEX B: Product Change Description Statement We Quectel Wireless Solutions Co., Ltd declare the following models. Product Name: LTE Cat M1 Module Model Number:BG96-NA Hardware Version: R1.0 Module Category Supported Band BG96-NA CAT M1 B2/B4/B12/B13 The HW design of BG96-NA is exactly the same with before,it just increasesB2/B12.BecauseB2 andB12 were disabled through software before and now be enabled. The hardware design and software feature are exactly the same. The change will not impact RF performance for original frequency bands. Your assistance on this matter is highly appreciated. Sincerely, Name:Jean Hu Title:Certification Section TA Technology (Shanghai) Co., Ltd. Page 11 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.


Document Created: 2019-09-05 10:35:04
Document Modified: 2019-09-05 10:35:04
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC