RF Exposure Info (MPE)_rev

FCC ID: 2AH3O-RBB10

RF Exposure Info

Download: PDF
FCCID_3020245

RF Exposure Report Report No.: SA160317C23A FCC ID: 2AH3O-RBB10 Test Model: RBB1.0 Received Date: Mar. 17, 2016 Test Date: Mar. 22, 2016 Issued Date: June 02, 2016 Applicant: Rapsodo Pte Ltd Address: Block 67, Ayer Rajah Crescent, #04-10, Singapore 139950 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location (1): E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA160317C23A Page No. 1 / 6 Report Format Version: 6.1.1 Reference No.: 160301C40

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Antenna Gain......................................................................................................................................... 5 4 Calculation Result of Maximum Conducted Power ........................................................................... 6 Report No.: SA160317C23A Page No. 2 / 6 Report Format Version: 6.1.1 Reference No.: 160301C40

Release Control Record Issue No. Description Date Issued SA160317C23A Original release. June 02, 2016 Report No.: SA160317C23A Page No. 3 / 6 Report Format Version: 6.1.1 Reference No.: 160301C40

1 Certificate of Conformity Product: BaseBall Launch Monitor Brand: Rapsodo BaseBall Test Model: RBB1.0 Sample Status: ENGINEERING SAMPLE Applicant: Rapsodo Pte Ltd Test Date: Mar. 22, 2016 Standards: FCC Part 2 (Section 2.1093) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: June 02, 2016 Claire Kuan / Specialist Approved by : , Date: June 02, 2016 May Chen / Manager Report No.: SA160317C23A Page No. 4 / 6 Report Format Version: 6.1.1 Reference No.: 160301C40

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time 2 (MHz) Strength (V/m) Strength (A/m) (mW/cm ) (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 … … F/1500 30 1500-100,000 … … 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula 2 Pd = (Pout*G) / (4*pi*r ) where 2 Pd = power density in mW/cm Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 3 Antenna Gain The antenna provided to the EUT, please refer to the following table: Brand Model Antenna Type Gain (dBi) Antenna Connector Innosent IPS-946 PCB 15 Solder Report No.: SA160317C23A Page No. 5 / 6 Report Format Version: 6.1.1 Reference No.: 160301C40

4 Calculation Result For Max Power data was copied from the original test report (Report No.: SA150428E01) 24GHz wireless transceiver Field Strength Frequency of Pout EIRP Pout EIRP Distance Power Density Limit Band Fundamental 2 2 (dBm) (mW) (cm) (mW/cm ) (mW/cm ) (MHz) (dBuV/m) @1m 24126 121.4 16.63 46.026 20 0.00916 1 NOTE: Pout EIRP (dBm) = Field Strength of Fundamental (dBuV/m) @1m - 104.77 (dB) WLAN 2.4GHz module (FCC ID: O7P-362) Frequency Max Power Antenna Gain Distance Power Density Limit Band 2 2 (mW) (dBi) (cm) (mW/cm ) (mW/cm ) (MHz) 2412-2462 97.7 2.15 20 0.03189 1 NOTE: Directional gain = 2.15dBi Conclusion: Both of the 24GHz wireless and WLAN 2.4GHz can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.00916 / 1 + 0.03189 / 1 = 0.04105, which is less than “1”. Therefore the maximum calculations of above situations are less than the “1” limit. NOTE: 2.4GHz : Directional gain = 2.5dBi + 10log(2) = 5.51dBi 5GHz : Directional gain = 2.5dBi + 10log(2) = 5.51dBi --- END --- Report No.: SA160317C23A Page No. 6 / 6 Report Format Version: 6.1.1 Reference No.: 160301C40


Document Created: 2017-12-07 15:37:16
Document Modified: 2017-12-07 15:37:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC