RF Exposure Info (MPE)

FCC ID: 2AH3O-MLM10

RF Exposure Info

Download: PDF
FCCID_4314453

RF Exposure Report Report No.: SA190311E06 FCC ID: 2AH3O-MLM10 Test Model: LBCA2BZZFZ-710 Received Date: Mar. 11, 2019 Test Date: Mar. 28 to Apr. 08, 2019 Issued Date: May 27, 2019 Applicant: Rapsodo Pte Ltd Address: Blk 67, Ayer Rajah Crescent, #04-10, Singapore 139950 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location : E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA190311E06 Page No. 1 / 7 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 6 2.5 Calculation Result Of Maximum Conducted Power ............................................................................ 7 Report No.: SA190311E06 Page No. 2 / 7 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued SA190311E06 Original release. May 27, 2019 Report No.: SA190311E06 Page No. 3 / 7 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Bluetooth Module Brand: Murata Electronics Test Model: LBCA2BZZFZ-710 Sample Status: MASS-PRODUCTION Applicant: Rapsodo Pte Ltd Test Date: Mar. 28 to Apr. 08, 2019 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: May 27, 2019 Wendy Wu / Specialis Approved by : , Date: May 27, 2019 May Chen / Manager Report No.: SA190311E06 Page No. 4 / 7 Report Format Version: 6.1.1

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time 2 (MHz) Strength (V/m) Strength (A/m) (mW/cm ) (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 2 1.34-30 824/f 2.19/f (180/f )* 30 30-300 27.5 0.073 0.2 30 300-1500 … … f/1500 30 1500-100,000 … … 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula 2 Pd = (Pout*G) / (4*pi*r ) where 2 Pd = power density in mW/cm Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA190311E06 Page No. 5 / 7 Report Format Version: 6.1.1

2.4 Antenna Gain For BT used Antenna Transmitter Antenna Gain Frequency Brand Model Antenna Type Connector Type No Circuit (dBi) range(GHz) 1 Chain (0) Murata LDA313G2613M-322 -3 2.4~2.4835 Monopole NA For 24GHz used Antenna Frequency Brand Model Antenna Gain (dBi) Antenna Type Connector Type No range(GHz) Integrated Patch 1 InnoSent SMR-333 7 24~24.25 NA Antenna Report No.: SA190311E06 Page No. 6 / 7 Report Format Version: 6.1.1

2.5 Calculation Result of Maximum Conducted Power For BT-LE Frequency Operation Max Power Antenna Gain Distance Power Density Limit Band 2 2 Mode (mW) (dBi) (cm) (mW/cm ) (mW/cm ) (MHz) Bluetooth-LE 2402 0.3155 -3 20 0.00003 1 For 24GHz (FCC ID: UXS-SMR3X3) Field Frequency Strength of Pout EIRP Power Operation Pout EIRP Distance Limit Band Fundamental Density 2 Mode (dBm) (mW) (cm) 2 (mW/cm ) (MHz) (mW/cm ) (dBuV/m) 24GHz 24169 106.14 10.91 12.331 20 0.00245 1 Field strength is then converted to EIRP as follows: (i) EIRP = ((E*d)^2) / 30 where: E is the field strength in V/m; d is the measurement distance in meters; EIRP is the equivalent isotropically radiated power in watts. (ii) Working in dB units, the above equation is equivalent to: EIRP[dBm] = E[dBμV/m] + 20log(d[meters]) - 104.77 (iii) Or, if d is 3 meters: EIRP[dBm] = E[dBμV/m] – 95.23 Note: 1. Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density BT-LE +24GHz = 0.00003 / 1 + 0.00245 / 1 = 0.00248 Therefore the maximum calculations of above situations are less than the “1” limit. --- END --- Report No.: SA190311E06 Page No. 7 / 7 Report Format Version: 6.1.1


Document Created: 2019-06-12 08:12:58
Document Modified: 2019-06-12 08:12:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC