Test Report

FCC ID: 2AH2AGTFPVB10000

Test Report

Download: PDF
FCCID_4440497

Produkte Products rüfbericht-Nr.: 50184655 001 Auftrags-Nr.: 144196106 Seite 1 von 16 Test Report No.: Order No.: Page 1 of 16 Kunden-Referenz-Nr.: N/A Auftragsdatum: 20.09.2018 Client Reference No.: Order date: Auftraggeber: GUITENG TOYS COMPANY LIMITED Client: Tongyi Road, Chenghai District,Shantou,China. Prüfgegenstand: Short Range Device - Copter with Wi-Fi Camera Test item: Bezeichnung / Typ-Nr.: Please refer to "Models" on page 4 Identification / Type No.: Auftrags-Inhalt: FCC Certification Order content: Prüfgrundlage: FCC Part 15 Subpart C Test specification: ANSI C63.10-2013 Wareneingangsdatum: 25.10.2018 Date of receipt: 01-08-2019 Prüfmuster-Nr.: A000827469-001 Test sample No.: A000967172-001 Prüfzeitraum: Testing period: 26.10.2018 - 14.08.2019 Ort der Prüfung: Place of testing: Hong Kong Prüflaboratorium: TÜV Rheinland Hong Testing laboratory: Kong Ltd. Prüfergebnis*: Pass Test result*: geprüft von / tested by: kontrolliert von / reviewed by: 02.09.2019 Mika Chan / Project Manager 02.09.2019 Sharon Li / Unit Senior Manager Datum Name / Stellung Unterschrift Datum Name / Stellung Unterschrift Date Name / Position Signature Date Name / Position Signature Sonstiges / Other: FCC ID: 2AH2AGTFPVB10000 Zustand des Prüfgegenstandes bei Anlieferung: Prüfmuster vollständig und unbeschädigt Condition of the test item at delivery: Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland Hong Kong Ltd. 3-4, 11/F., Fou Wah Industrial Building, 10-16 Pun Shan Street, Tsuen Wan, N.T., Hong Kong Tel.: +852 2192 1000 Fax: +852 2192 1001 Email service-gc@tuv.com Web: www.tuv.com

FCC_15.247_DTS_v2.0 Table of Content Page Cover Page …………………………………………………………………… 1 Table of Content ..…………………………………………………………… 2 Product information.......................................................................................................4 Manufacturers declarations ....................................................................................................................... 4 Product function and intended use ........................................................................................................... 4 Submitted documents................................................................................................................................. 4 Independent Operation Modes .................................................................................................................. 4 Related Submittal(s) Grants ....................................................................................................................... 5 Remark ......................................................................................................................................................... 5 Test Set-up and Operation Mode ..................................................................................6 Principle of Configuration Selection ......................................................................................................... 6 Test Operation and Test Software ............................................................................................................. 6 Special Accessories and Auxiliary Equipment ......................................................................................... 6 Countermeasures to achieve EMC Compliance....................................................................................... 6 Test Methodology ..........................................................................................................7 Radiated Emission ...................................................................................................................................... 7 Field Strength Calculation .......................................................................................................................... 7 Test Setup Diagram .......................................................................................................8 Test Facility ..................................................................................................................10 Test Laboratory Information .................................................................................................................... 10 List of Test and Measurement Instruments ...............................................................11 Measurement Uncertainty ...........................................................................................12 Results FCC Part 15 – Subpart C ...............................................................................13 FCC 15.203 – Antenna Requirement 1............................................................................. Pass............... 13 FCC 15.204 – Antenna Requirement 2............................................................................... N/A............... 13 FCC 15.207 – Conducted Emission on AC Mains ............................................................ N/A............... 13 FCC 15.247 (a)(2) – 6dB Bandwidth Measurement ........................................................ Pass............... 13 FCC 15.247(b)(3) – Maximum Peak Couducted Output Power ..................................... Pass............... 14 FCC 15.247(e) – Power Spectral Density......................................................................... Pass............... 14 FCC 15.247(d) – Spurious Conducted Emissions .......................................................... Pass............... 15 FCC 15.205 – Radiated Emissions in Restricted Frequency Bands............................. Pass............... 16 Test Report No.: 50184655 001 Date: 02.09.2019 Page 2 of 16

FCC_15.247_DTS_v2.0 Appendix 1 – Test protocols 7 pages Appendix 2 – Test setup 2 pages Appendix 3 – EUT External Photos 3 pages Appendix 4 – EUT Internal Photos 6 pages Appendix 5 – RF exposure information 2 pages Test Report No.: 50184655 001 Date: 02.09.2019 Page 3 of 16

FCC_15.247_DTS_v2.0 Product information Manufacturers declarations Transceiver Operating frequency range 2412 MHz Type of modulation Other type of spread spectrum Number of channels 1 Channel separation 5 MHz Type of antenna Wire Antenna Antenna gain (dBi) 2.5 dBi Power level fix Type of equipment stand alone radio device Connection to public utility power line No Nominal voltage Vnor: 3.7 VDC Independent Operation Modes Transmitting Product function and intended use The equipment under test (EUT) is a Copter with Wi-Fi Camera . The manufacturer declares that the models listed below are all identical in electrical, PCB layout and components used except the model number and packaging only. FCC ID: 2AH2AGTFPVB10000 Models Product description T902W, T901,T901F,T901C,T901W,T902,T902C,T903,T905,T905F, T905C,T905W,T906,T906F,T906C,T906W,T907,T907F,T907C,T907W, Short Range Device - T908,T908F,T908C,T908W,T909,T910,T910F,T910C,T910W,T911, Copter with Wi-Fi T911F,T911C,T911W,T912,T912F,T912C,T912W,T913,T913F,T913C, Camera T913W,T915,T915F,T915C,T915W,H1,H10,H16 Submitted documents Circuit Diagram Block Diagram Technical Description User manual Label Independent Operation Modes The basic operation modes are: - Transmitting mode. For further information refer to User Manual Test Report No.: 50184655 001 Date: 02.09.2019 Page 4 of 16

FCC_15.247_DTS_v2.0 Related Submittal(s) Grants This is a single application for certification of the transmitter. Remark The test results in this test report are only relevant to the tested sample and does not involve any assessment in the production. Test Report No.: 50184655 001 Date: 02.09.2019 Page 5 of 16

FCC_15.247_DTS_v2.0 Test Set-up and Operation Mode Principle of Configuration Selection Emission: The equipment under test (EUT) was configured to measure its highest possible radiation level. The test modes were adapted accordingly in reference to the instructions for use. Test Operation and Test Software Test operation should refer to test methodology. - During test, Channel & Power Controlling Software provided by the customer was used to control the operating channel as well as the output power level. The RF output power was selected according to the instruction given by the manufacturer (55aa010210). The setting of the RF output power expected by the customer shall be fixed on the firmware of the final end product. Special Accessories and Auxiliary Equipment - None Countermeasures to achieve EMC Compliance - none Test Report No.: 50184655 001 Date: 02.09.2019 Page 6 of 16

FCC_15.247_DTS_v2.0 Test Methodology Radiated Emission The radiated emission measurements of the transmitter part were performed according to the procedures in ANSI C63.10-2013. For measurement below 1GHz - the equipment under test (EUT) was placed at the middle of the 80 cm height turntable. For measurement above 1GHz - the EUT was placed at the middle of the 1.5 m height turntable and RF absorbing material was placed on ground plane between turntable and measuring antenna. During the testing, the EUT was operated standalone and arranged for maximum emissions. The EUT was tested in three orthogonal planes. The investigation is performed with the EUT rotated 360 ﾟ, the antenna height scanned between 1m and 4m, and the antenna rotated to repeat the measurements for both the horizontal and vertical antenna polarizations. Repeat the measurement steps until the maximum emissions were obtained. All radiated tests were performed at an antenna to EUT with 3 meters distance, unless stated otherwise in particular parts of this test report. Field Strength Calculation The field strength at 3 m was established by adding the meter reading of the spectrum analyzer to the factors associated with antenna correction factor, cable loss, preamplifiers and filter attenuation. The equation is expressed as follow: FS = R + AF + CF + FA – PA Where FS = Field Strength in dBuV/m at 3 meters. R = Reading of Spectrum Analyzer in dBuV. AF = Antenna Factor in dB. CF = Cable Attenuation Factor in dB. FA = Filter Attenuation Factor in dB. PA = Preamplifier Factor in dB. FA and PA are only be used for the measuring frequency above 1 GHz. Test Report No.: 50184655 001 Date: 02.09.2019 Page 7 of 16

FCC_15.247_DTS_v2.0 Test Setup Diagram Diagram of Measurement Configuration for Radiation Test Note: Measurements above 1 GHz are done with a table height of 1.5m. In addition, there is RF absorbing material on the floor of the test site for above 1GHz measurement. Diagram of Measurement Equipment Configuration for Mains Conduction Measurement (if applicable) Test Report No.: 50184655 001 Date: 02.09.2019 Page 8 of 16

FCC_15.247_DTS_v2.0 Diagram of Equipment Configuration for Antenna-port Conducted Measurement (if applicable) RF Cable Spectrum Analyzer EUT Data cable to EUT Laptop with test SW installed Test Report No.: 50184655 001 Date: 02.09.2019 Page 9 of 16

FCC_15.247_DTS_v2.0 Test Facility Test Laboratory Information TÜV Rheinland Hong Kong Ltd. Address: 3-4, 11/F., Fou Wah Industrial Building, 10-16 Pun Shan Street, Tsuen Wan, N.T., Hong Kong Tel.: +852 2192 1000 Fax: +852 2192 1001 Email service-gc@tuv.com Web: www.tuv.com The test facility is recognized or accredited by the following organizations: FCC Type : Accredited Test Firm Designation Number : HK0013 Test Firm Registration Number : 371735 Scope : Intentional Radiators Test Report No.: 50184655 001 Date: 02.09.2019 Page 10 of 16

FCC_15.247_DTS_v2.0 List of Test and Measurement Instruments Radiated Emission Equipment Manufacturer Type Cal. Date Due Date Semi-anechoic Chamber Frankonia Nil 23 Apr 2019 23 Apr 2020 Test Receiver R&S ESU26 11 Jun 2019 11 Jun 2020 Bi-conical Antenna R&S HK116 21 Mar 2018 21 Mar 2020 Log Periodic Antenna R&S HL223 22 Mar 2018 22 Mar 2020 CNM- NMCMILX800- Cable with I-Joint Conector Huber+Suhner 473 04 Oct 2018 04 Oct 2020 Active Loop Antenna EMCO 6502 25 Oct 2018 25 Oct 2019 Double-Ridged Waveguide Horn EMCO 3116 05 Oct 2018 05 Oct 2019 Double-Ridged Waveguide Horn EMCO 3117 30 Aug 2018 30 Aug 2020 CNM- NMCMILX800- Cable with I-Joint Conector Huber+Suhner 473 04 Oct 2018 04 Oct 2020 COM-POWER Microwave Preamplifier Corporation PAM-118A 25 Jun 2019 25 Jun 2020 Preamplifier 18GHz to 40GHz with cable A.H. Systems, (EMC656) Inc. PAM-1840VH 30 Jan 2019 30 Jan 2020 High Pass Filter (cutoff freq. =1000MHz) Trilithic 23042 30 Oct 2017 30 Oct 2019 High Frequency Cable Pasternack PE3VNA4001-3M 29 Jan 2019 29 Jan 2020 Horn Antenna EMCO 3115 28 Mar 2018 28 Mar 2020 Radio Test Equipment Manufacturer Type Cal. Date Due Date Spectrum Analyzer R&S FSP30 26 Jun 2019 26 Jun 2020 Test Report No.: 50184655 001 Date: 02.09.2019 Page 11 of 16

FCC_15.247_DTS_v2.0 Measurement Uncertainty The estimated combined standard uncertainty for radiated emissions measurements is ±4.81dB (9kHz to 30MHz) and ±4.62dB (30MHz to 200MHz) and ±5.67dB (200MHz to 1000MHz) and is ±5.07dB (1GHz to 8.2GHz) and ±4.58dB (8.2GHz to 12.4GHz) and ±4.78dB (12.4GHz to 18GHz) The estimated combined standard uncertainty for antenna conducted emission is ±2.1dB The reported expanded uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor of k=2, which for the level of confidence is approximately 95%. Test Report No.: 50184655 001 Date: 02.09.2019 Page 12 of 16

FCC_15.247_DTS_v2.0 Results FCC Part 15 – Subpart C FCC 15.203 – Antenna Requirement 1 Pass FCC Requirement: No antenna other than that furnished by the responsible party shall be used with the device Results: a) Antenna type: Wire antenna b) Manufacturer and model no: N/A c) Peak Gain: 2.5 dBi Verdict: Pass FCC 15.204 – Antenna Requirement 2 N/A FCC Requirement: An intentional radiator may be operated only with the antenna with which it is authorized. If an antenna is marketed with the intentional radiator, it shall be of a type which is authorized with the intentional radiator. Results: Only one integral antenna can be used. Verdict: N/A FCC 15.207 – Conducted Emission on AC Mains N/A There is no AC power input or output ports on the EUT. FCC 15.247 (a)(2) – 6dB Bandwidth Measurement Pass FCC Requirement: Systems using digital modulation techniques may operate in the 902 – 928 MHz, 2400 – 2483.5 MHz, and 5725 – 5850 MHz bands. The minimum 6dB bandwidth shall be at least 500kHz. Test Specification : ANSI C63.10 – 2013 Test date : 14.08.2019 Mode of operation : Tx mode Port of testing : Temporary antenna port Supply voltage : 3.7 VDC Temperature : 23ºC Humidity : 50% Results: For test protocols please refer to Appendix 1 Channel frequency 6 dB left 6 dB right 6dB bandwidth (MHz) (MHz) (MHz) (MHz) 2412 2403.12 2421.000 17.88 Test Report No.: 50184655 001 Date: 02.09.2019 Page 13 of 16

FCC_15.247_DTS_v2.0 FCC 15.247(b)(3) – Maximum Peak Couducted Output Power Pass FCC Requirement: For systems using digital modulation in the 902-928 MHz, 2400-2483.5 MHz, and 5725- 5850MHz bands: 1 Watt (30dBm) Test Specification : ANSI C63.10 – 2013 Test date : 14.08.2019 Mode of operation : Tx mode Port of testing : Temporary antenna port Supply voltage : 3.7VDC Temperature : 23ºC Humidity : 50% Results: For test protocols please refer to Appendix 1 Frequency Measured Output Power Limit Verdict (MHz) (dBm) (W/dBm) 2412 12.21 1 / 30.0 Pass FCC 15.247(e) – Power Spectral Density Pass FCC Requirement: For digitally modulated systems, the power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8 dBm in any 3 kHz band during any time interval of continuous transmission. Test Specification : ANSI C63.10 – 2013 Test date : 14.08.2019 Mode of operation : Tx mode Port of testing : Temporary antenna port Supply voltage : 3.7VDC Temperature : 23ºC Humidity : 50% Results: For test protocols please refer to Appendix 1. Operating frequency Power density Limit Verdict (MHz) (dBm) (dBm) 2412 -6.49 8.0 Pass Test Report No.: 50184655 001 Date: 02.09.2019 Page 14 of 16

FCC_15.247_DTS_v2.0 FCC 15.247(d) – Spurious Conducted Emissions Pass Test Specification : ANSI C63.10 – 2013 Test date : 14.08.2019 Mode of operation : Tx mode Port of testing : Temporary antenna port Supply voltage : 3.7VDC Temperature : 23ºC Humidity : 50% FCC Requirement: In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement. Results: Pre-scan has been conducted to determine the worst-case mode from all possible combinations between available modulations and data rate. Only the worst cases is shown below. For test protocols refer to Appendix 1 Operating Spurious Spurious Level Reference value Delta Verdict frequency frequency (dBm) (dBm) (dB) (MHz) (MHz) 2412 9260.000 -40.58 -6.34 -34.24 Pass Test Report No.: 50184655 001 Date: 02.09.2019 Page 15 of 16

FCC_15.247_DTS_v2.0 FCC 15.205 – Radiated Emissions in Restricted Frequency Bands Pass Test Specification : ANSI C63.10 – 2013 Test Specification : 13.08.2018 Mode of operation : Tx mode Port of testing : Enclosure Frequency range : 9kHz – 25GHz Supply voltage : 3.8VDC Temperature : 23ºC Humidity : 50% FCC Requirement: In any 100kHz bandwidth outside the frequency band at least 20dB below the highest level of the desired power. In addition, radiated emissions which fall in the restricted bands, as defined in section15.205(a), must also comply with the radiated emission limits specified in section 15.205(c). lts: Results: Pre-scan has been conducted to determine the worst-case mode from all possible combinations between available modulations and data rate. All three transmit frequency modes comply with the field strength within the restricted bands. There is no spurious found below 30MHz. Mode: 2412 MHz TX Vertical Polarization Freq Level Limit/ Detector MHz dBuV/m dBuV/m 2390.000 55.4 74.0 / PK 2390.000 31.6 54.0 / AV 4824.459 44.9 74.0 / PK 4824.459 34.3 54.0 / AV Mode: 2412 MHz TX Horizontal Polarization Freq Level Limit/ Detector MHz dBuV/m dBuV/m 2390.000 64.7 74.0 / PK 2390.000 50.2 54.0 / AV 4824.474 48.0 74.0 / PK 4824.474 39.6 54.0 / AV Test Report No.: 50184655 001 Date: 02.09.2019 Page 16 of 16


Document Created: 2019-09-11 14:43:38
Document Modified: 2019-09-11 14:43:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC