I18D00233-EMC04-V01

FCC ID: 2AH25T5921

Test Report

Download: PDF
FCCID_4141694

TEST REPORT No. I18D00233-EMC04 For Client : Shanghai Sunmi Technology Co.,Ltd. Production: Wireless data POS System Model Name : T5921 Brand Name: SUNMI FCC ID: 2AH25T5921 Hardware Version: QP1665_MB_PCB_V1 Software Version: zqp1665_V002_181121 Issued date: 2019-01-23

Report No.:I18D00233-EMC04 NOTE 1. The test results in this test report relate only to the devices specified in this report. 2. This report shall not be reproduced except in full without the written approval of China Telecommunication Technology Labs. 3. The measurement uncertainty is not taken into account when deciding conformity, and the results of measurement (or the average of measurement results) are directly used as the criterion for the stating conformity. Test Laboratory: East China Institute of Telecommunications Add: 7-8F, G Area, No.668, Beijing East Road, Huangpu District, Shanghai, P. R. China Tel: +862163843300 FAX: +862163843301 E-Mail: welcome@ecit.org.cn East China Institute of Telecommunications Page Number : 2 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 Revision Version Report Number Revision Date Memo I18D00233-EMC04 00 2019-01-10 Initial creation of test report I18D00233-EMC04 01 2019-01-23 Second creation of test report East China Institute of Telecommunications Page Number : 3 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 CONTENTS 1. TEST LABORATORY ............................................................................................................... 6 1.1. TESTING LOCATION ............................................................................................................... 6 1.2. TESTING ENVIRONMENT ....................................................................................................... 6 1.3. PROJECT DATA ....................................................................................................................... 6 1.4. SIGNATURE.............................................................................................................................. 6 2. CLIENT INFORMATION ........................................................................................................... 7 2.1. APPLICANT INFORMATION.................................................................................................... 7 2.2. MANUFACTURER INFORMATION.......................................................................................... 7 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................ 8 3.1. ABOUT EUT.............................................................................................................................. 8 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST ....................................... 8 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ......................................... 8 4. REFERENCE DOCUMENTS.................................................................................................... 9 4.3. REFERENCE DOCUMENTS FOR TESTING .......................................................................... 9 5. TEST RESULTS...................................................................................................................... 10 5.1. SUMMARY OF TEST RESULTS ............................................................................................ 10 5.2. STATEMENTS......................................................................................................................... 10 6. TEST EQUIPMENT UTILIZED ................................................................................................11 7. SYSTEM CONFIGURATION DURING TEST......................................................................... 12 7.1 TEST MODE............................................................................................................................. 12 7.2 CONNECTION DIAGRAM OF TEST SYSTEM....................................................................... 12 8. MEASUREMENT RESULTS................................................................................................... 13 8.1 20DB BANDWIDTH ................................................................................................................. 13 8.2 FREQUENCY STABILITY........................................................................................................ 15 8.3 RADIATED EMISSIONS .......................................................................................................... 17 East China Institute of Telecommunications Page Number : 4 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 8.3.1 ELECTRIC FIELD STRENGTH OF FUNDAMENTAL EMISSIONS .................................... 17 8.3.2 ELECTRIC FIELD RADIATED EMISSIONS (BELOW 30MHZ) .......................................... 19 8.3.3 ELECTRIC FIELD RADIATED EMISSIONS (ABOVE 30MHZ) ........................................... 21 8.4 CONDUCTED EMISSIONS ..................................................................................................... 23 ANNEX A TEST CONFIGURATION PHOTOS.............................................................................. 25 East China Institute of Telecommunications Page Number : 5 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

ECIT Report No.: 118D00233—EMCO4 1. Test Laboratory 1.1. Testing Location Company Name: ECIT Shanghai, East China Institute of Telecommunications Address: 7F, G Area, No. 668, Beijing East Road, Huangpu District, Shanghai, P. R. China Postal Code: 200001 Telephone: 86—21—63843300 Fax: 86—21—63843301 FCC registration No: 958356 1.2. Testing Environment Normal Temperature: 15—35°C Relative Humidity: 30—60%RH 1.3. Project data Project Leader: Yu Anlu Testing Start Date: 2018—12—25 Testing End Date: 2018—12—26 1.4. Signature &+ % 144 Qin Yabin You Jinjun (Prepared this test report) {Reviewed this test report) Zheng Zhongbin {Approved this test report) East China Institute of Telecommunications Page Number : 6 of 26 TEL: +86 21 63843300FAX+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 2. Client Information 2.1. Applicant Information Company Name: Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Address : Shanghai, China Telephone: 18721763396 Postcode: 200433 2.2. Manufacturer Information Company Name: Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Address : Shanghai, China Telephone: 18721763396 Postcode: 200433 East China Institute of Telecommunications Page Number : 7 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

ECIT Report No.: 118D00233—EMCO4 3. Equipment under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT EUT Description Wireless data POS System Model name T5921 GSM Frequency Band GSMS50/GS MS0O0/GSM1800/GSM1900 WCDMA Frequency Band WCDMA BAND T /IL/IV/V CDMA Frequency Band BCOBC1 LTE Frequency Band LTE BAND 2/4/7/17/28 Additional Communication Function BT3.0,BLE, 4.2;WIFI 802.11a/b/g/n; NFC; 3.2. Internal Identification of EUT used during the test EUT ID* SN or IME]1 HW Version SW Version Date of receipt QP1665_MB_PCB zqgp1665_VO0 NO7Z / _vi 2181121 2018—12—15 *EUT ID: is used to identify the test sample in the lab internally. 3.3. Internal Identification of AE used during the test AE ID* Description Model SN CAQO7 Adapter TPA—23A0502000UUO01 / UAOS USB Cable / / AE1 Type A Card / / *AE ID: is used to identify the test sample in the lab internally. East China Institute of Telecommunications Page Number : 8 of 26 TEL: +86 21 63843300FAX+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 4. Reference Documents 4.3. Reference Documents for testing The following documents listed in this section are referred for testing. Reference Title Version FCC CFR47 Frequency allocations and radio treaty matters; 2017 Part 2 general rules and regulations FCC CFR47 Radio Frequency Devices-Intentional Radiators 2017 Part 15C American National Standard of Procedures for Compliance ANSI C63.10 2013 Testing of Unlicensed Wireless Devices East China Institute of Telecommunications Page Number : 9 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 5. Test Results 5.1. Summary of Test Results Items Test List Clause in FCC rules Verdict 1 20 dB bandwidth 2.1049 Pass 2 Frequency Stability 15.225(e) Pass 3 Radiated Emissions 15.225 (a) (b) (c) (d) and 15.209 Pass 4 Conducted Emissions 15.207 Pass 5.2. Statements The Wireless data POS System, supporting NFC, manufactured by Shanghai Sunmi Technology Co.,Ltd. a new product for testing. ECIT performed test cases which identified with Pass/Fail/Inc result in section 5.1. ECIT has verified that the compliance of the tested device specified in section 3 of this test report is successfully evaluated according to the procedure and test methods as defined in type certification requirement listed in section 4 of this test report. East China Institute of Telecommunications Page Number : 10 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 6. Test Equipment Utilized Series Cal. No. Name Type Producer Cal. Date Number interval 1 Test Receiver ESU40 100307 R&S 2018-05-11 1 Year 2 Trilog Antenna VULB9163 VULB9163-515 Schwarzbeck 2017-02-25 3 Year COM-POWE 3 Loop Antenna AL-130R 121083 2016-11-21 3 Year R EMI Test EMC32 4 NA R&S NA NA Software V9.15 5 Test Receiver ESCI 101235 R&S 2018-05-11 1 Year 2-Line 6 ENV216 101380 R&S 2018-05-11 1 Year V-Network EMI Test EMC32 7 NA R&S NA NA Software V9.12 Vector Signal 8 FSQ26 101096 R&S 2018-05-11 1 Year Analyser Climate 9 SH-641 92012011 ESPEC 2017-12-05 2 Year chamber East China Institute of Telecommunications Page Number : 11 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 7. System Configuration during Test 7.1 Test Mode Test Item Function Type 20 dB bandwidth Mode 1: TX mode <Figure 1> Frequency Stability Mode 1: TX mode <Figure 1> Radiated Emissions Mode 1: TX mode <Figure 1> Conducted Emissions Mode 2: TX mode + CA07+UA05 <Figure 2> Remark: The NFC function is opened in the setting menu. The EUT will transmit the NFC command continuously during the test, and will read the information from the Type A Card continuously. 7.2 Connection Diagram of Test System AE1 EUT <Figure 1> Mode 1 AE1 USB Cable EUT Adapter <Figure 2> Mode 2 East China Institute of Telecommunications Page Number : 12 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

ECIT Report No.: 118D00233—EMCO4 8. Measurement Results 8.1 20dB Bandwidth Reference See Clause 6.9 of ANS 1 C63.10—2013 Measurement Methods The transmitter output signal was picked up by coil antenna to the spectrum analyzer. The transmitter output signal was picked up by coil antenna connected to the spectrum analyzer. The bandwidth of the center frequency was measured with 140Hz RBW, 420Hz VBW and 14kHz span. Test Setup Coil Antenna EUT Spectrum Analyzer EUT Operating Mode and Test Conditions The measurement of EUT is carried out under the transmit state of NFC and without modulation. EUT had been not connected to a travel adapter. During the measurements, the ambient temperature is in the range of 15~25°C. Limits The 200B bandwidth shall be less than 80%of the permitted frequency band. For 13.56MHz NFC, the permitted frequency band is 14kHz, so the limit is 11.2kHz. Uncertainty Measurement The measurement uncertainty is 60.8Hz (k=2) East China Institute of Telecommunications Page Number : 13 of 26 TEL: +86 21 63843300FAX+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 Test Results: Carrier frequency 20dB Bandwidth Conclusion (MHz) (kHz) 13.56 0.538 Pass East China Institute of Telecommunications Page Number : 14 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

ECIT Report No.: 118D00233—EMCO4 8.2 Frequency Stability Reference See Clause 6.8 of ANS 1 C63.10—2013 Measurement Methods Thermal Chamber Coil Antenna EUT Frequency Counter The transmitter output single was picked up by coil antenna connected to the frequency counter. The center frequency was measured with 30Hz RBW and 1kHz span. During the test, the EUT was placed in a thermal chamber until thermal balance and lasting appropriate time. EUT Operating Mode and Test Conditions The measurement of EUT is carried out under the transmit state of without modulation , EUT1 had been not connected to a travel adapter. Operation Temperature: Tmin=—20°C, Tnom=25°C, and Tmax=50°C Operation Voltage: Vmin=22.8V, Vmax=25.2V.and Tnom=24V. Limits The frequency tolerance of the carrier signal shall be maintained within +/— 0.01% of the operating frequency. Uncertainty Measurement The measurement uncertainty U=60.8Hz(k=2). East China Institute of Telecommunications Page Number : 15 of 26 TEL: +86 21 63843300FAX+86 21 63843301 Report Issued Date: Jan.23, 2019

E;.c’_T Report No.: 118D00233—EMCO4 Test Results Temperature Voltage Frequency Error (MHz) Startup 2Min Later 5Min Later 10Min Later Tmin Vrnom 13.560413 13.560416 13.560409 13.560411 Tmax Vrnom 13.560484 13.560485 13.560487 13.560483 Tnom Vrnom 13.560463 13.560466 13.560469 13.560464 Tnom Vmin 13.560428 13.560421 13.560421 13.560420 Tnom Vmax 13.560439 13.560431 13.560433 13.560438 Temperature Voltage Frequency Error (%) Startup 2Min Later 5Min Later 10Min Later Tmin Vrnom 0.003 0.003 0.003 0.003 Tmax Vrnom 0.003 0.003 0.003 0.003 Tnom Vnom 0.003 0.003 0.003 0.003 Tnom Vmin 0.003 0.003 0.003 0.003 Tnom Vmax 0.003 0.003 0.003 0.003 East China Institute of Telecommunications Page Number : 16 of 26 TEL: +86 21 63843300FAX+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 8.3 Radiated Emissions 8.3.1 Electric Field Strength of Fundamental Emissions Reference See Clause 6.4 of ANSI C63.10-2013 Method of Measurement The test set-up was made in accordance to the general provisions of ANSI C63.10-2013.The transmitter carrier output levels (E-Field) from the EUT are measured in a semi-anechoic chamber. The EUT is placed on a non-conductive stand of 80cm high, and at a measurement distance of 3m from the receiving antenna. The center of the receiving antenna is 1 meter above the ground. The E-field is measured with a shielded loop antenna connected to a measurement receiver. Detected E-field was maximized by rotating the EUT through 360°and adjusting the receiving antenna polarizations. Both horizontal and vertical polarizations of the antenna were set during the measurement. The maximization processes were repeated with the EUT positioned respectively in its three orthogonal axes. The measurements were performed with the peak detector and if required, the quasi-peak detector. The measurement bandwidth: Frequency (MHz) RBW / VBW 12.56-14.56 10 / 30kHz The E-field measured at 3m is calculated as: E-field (dBuV/m) = Rx (dBuV) + Cable Loss (dB) + AF@3m (dB/m) Test Setup Limits Clause 15.225(a) the field strength of any emissions within the band 13.553-13.567 MHz shall not exceed 15,848 microvolts/meter at 30 meters. East China Institute of Telecommunications Page Number : 17 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 Clause 15.225(b) within the bands 13.410-13.553 MHz and 13.567-13.710 MHz, the field strength of any emissions shall not exceed 334 microvolts/meter at 30 meters. Clause 15.225(c) within the bands 13.110-13.410 MHz and 13.710-14.010 MHz the field strength of any emissions shall not exceed 106 microvolts/meter at 30 meters. Frequency Range (MHz) E-field Strength Limit @30m E-field Strength Limit @3m (uV/m) (dBuV/m) 13.560 ± 0.007 +15,848 124 13.410 to 13.553 +334 90 13.567 to 13.710 13.110 to 13.410 +106 81 13.710 to 14.010 Note: Where the limits have been defined at one distance, and a signal level measured at another, the limits have been extrapolated using the following formula: Extrapolation (dB) = (Measurement Distance / Specification Distance) Measurement Uncertainty Measurement uncertainly: (9kHz-30MHz) 5.66dB k=2 Measurement Results Measurement results of normal conditions see Figure 1 for different set-ups of EUT. The result displayed take into account applicable antenna factors and cable losses Figure 1 TX mode East China Institute of Telecommunications Page Number : 18 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 8.3.2 Electric Field Radiated Emissions (Below 30MHz) Reference See Clause 6.4 of ANSI C63.10-2013 Method of Measurement The electric field radiated emissions from the EUT are measured in a semi-anechoic chamber. The EUT is placed on a non-conductive stand of 80cm high, and at a measurement distance of 3m from the receiving antenna. The center of the receiving antenna is 1 meter above the ground. The E-field is measured with a shielded loop antenna connected to a measurement receiver. Detected E-field was maximized by rotating the EUT through 360°and adjusting the receiving antenna polarizations. Both horizontal and vertical polarizations of the antenna were set during the measurement. The maximization processes were repeated with the EUT positioned respectively in its three orthogonal axes. The measurements were performed with the peak detector and if required, the quasi-peak detector. The measurement bandwidth: Frequency (MHz) RBW / VBW 0.009-30 10 / 30kHz The E-field measured at 3m is calculated as: E-field (dBuV/m) = Rx (dBuV) + Cable Loss (dB) + AF@3m (dB/m) Test Setup East China Institute of Telecommunications Page Number : 19 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 Limits Frequency Range (MHz) E-field Strength Limit @30m E-field Strength Limit @3m (mV/m) (dBuV/m) 0.009-0490 2400/F (kHz) 129-94 0.490-1.705 24000/F (kHz) 74-63 1.705-30 30 70 Note: Where the limits have been defined at one distance, and a signal level measured at another, the limits have been extrapolated using the following formula: Extrapolation (dB) = (Measurement Distance / Specification Distance) Measurement Uncertainty Measurement uncertainly: (9kHz-30MHz) 5.66dB k=2 Measurement Results Measurement results of normal conditions see Figure 2 for different set-ups of EUT. The result displayed take into account applicable antenna factors and cable losses Figure 2 TX mode (9kHz-30MHz) East China Institute of Telecommunications Page Number : 20 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 8.3.3 Electric Field Radiated Emissions ( Above 30MHz) Reference See Clause 6.5 of ANSI C63.10-2013 Method of Measurement The electric field radiated emissions from the EUT are measured in a semi-anechoic chamber. The EUT is placed on a non-conductive stand of 80cm high, and at a measurement distance of 3m from the receiving antenna. The table was rotated 360 degree and the received antenna mounted on a variable-height antenna tower was varied from 1m to 4m to find the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna were set during the measurement. The data of cable loss and antenna factor has been calibrated in full testing frequency range before the testing. The measurements were performed with the peak detector and if required, the quasi-peak detector. The measurement bandwidth: Frequency (MHz) RBW / VBW 30-1000 120 kHz / 300kHz Test Setup . Limits Frequency Range (MHz) E-field Strength Limit @3m E-field Strength Limit @3m (mV/m) (dBuV/m) 30-88 100 40 88-216 150 43.5 216-960 200 46 960-1000 500 54 Measurement Uncertainty Measurement uncertainly: (30MHz-1000MHz) 4.98dB k=2 East China Institute of Telecommunications Page Number : 21 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 Measurement Results Measurement results of normal conditions see Figure 3 for different set-ups of EUT. The result displayed take into account applicable antenna factors and cable losses QP detection is used in radiated emissions test, and the Duty Cycle of NFC main frequency signal is 100%. Figure 3 TX mode (30MHz-1000MHz) Frequency QuasiPeak Lim it Margin Meas. Bandw idth Height Pol Azimut Corr. (MHz) (dBµV/m ) (dBµV/ (dB) Time (kHz) (cm) h (dB) m) (ms) (deg) 34.613957 15.07 40.00 24.93 1000.0 120.000 100.0 V 95.0 -22.0 40.671720 37.65 40.00 2.35 1000.0 120.000 102.0 V 215.0 -20.8 54.219923 15.54 40.00 24.46 1000.0 120.000 125.0 H 107.0 -20.9 80.486853 5.26 40.00 34.74 1000.0 120.000 102.0 H 106.0 -27.3 108.452528 14.84 43.50 28.66 1000.0 120.000 102.0 H 165.0 -23.7 176.270808 30.66 43.50 12.84 1000.0 120.000 189.0 H 188.0 -26.0 East China Institute of Telecommunications Page Number : 22 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 8.4 Conducted Emissions Reference See Clause 6.2 of ANSI C63.10-2013 Methods of Measurement The conducted emissions from the AC port of the EUT are measured in a shielding room. The EUT is connected to a Line Impedance Stabilization Network (LISN). An overview sweep with peak detection was performed. The measurements were performed with a quasi-peak detector and if required, an average detector. Tested in accordance with the procedures of ANSI C63.10-2013 The conducted emission measurements were made with the following detector of the test receiver Quasi-Peak / Average Detector. Test Setup The measurement bandwidth and Test Condition Frequency (MHz) RBW Sweep Time (s) Test Voltage 0.15-30 9 kHz Auto 120V/60Hz Test Setup . Limits Frequency Range (MHz) Conducted Limit (dBuV) Quasi-peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 *Decreases with the logarithm of the frequency Measurement Uncertainty East China Institute of Telecommunications Page Number : 23 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

ECIT Report No.: 118D00233—EMCO4 Measurement uncertainly: (150kHz—30MHz) 3.660B k=2 Measurement Results Note: The measurement result at 13.56MHz is the fundamental emission of NFC signal. :WMS C ks "[ * \r‘w! I\MH‘. » JW}( W n uie ol % | W W 150k 300 400500 8001 M 2M 3M 4M5M6 8 10M 20M 30M Frequency in Hz Figure 4 TX mode (150kHz—30MHz) Frequency QuasiPeak Average Lim it Margin Meas. Bandw idth Line Filter Corr. (MHz) (dBp V) (dBp V) (dBu V) (dB) Time (IKHz) (dB) 0.179850 42.65 64.49 21.85 1000.0 9.000 N oN 9.7 0.179850 28.67 54.49 25.82 1000.0 9.000 N oN 9.7 0.747000 44.78 56.00 11.22 1000.0 9.000 L1 oN 9.7 0.747000 35.40 46.00 10.60 1000.0 9.000 L1 oN 9.7 13.362356 17.00 50.00 33.00 1000.0 9.000 N oN 9.9 13.362356 36.73 60.00 23.27 1000.0 9.000 N oN 9.9 13.519069 14.97 50.00 35.03 1000.0 9.000 N oN 9.9 13.519069 42.m1 60.00 17.29 1000.0 9.000 N oN 9.9 14.209350 17.23 50.00 32.77 1000.0 9.000 N oN 9.9 14.209350 35.12 60.00 2488 1000.0 9.000 N oN 9.9 27.022463 745 50.00 42.55 1000.0 9.000 N oN 9.9 27.022463 25.16 60.00 34.84 1000.0 9.000 N on 9.9 Note: 1. Emission level{quasi—peak or Average peak)=Raw value by receiver + Corr{(Insertion loss+ cable loss) 2. The raw value is used to calculate by software which is not shown in the sheet. Margin=limit value — emission level. to 4. L1 and N line is all have been tested , the result of them is synthesized in the above data diagram. East China Institute of Telecommunications Page Number : 24 of 26 TEL: +86 21 63843300FAX+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 Annex A Test Configuration Photos Picture1: Field Radiated Emissions (Below 30MHz) Picture2: Field Radiated Emissions (Above 30MHz) East China Institute of Telecommunications Page Number : 25 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019

Report No.:I18D00233-EMC04 Picture3: Conducted Emissions **********END OF REPORT********** East China Institute of Telecommunications Page Number : 26 of 26 TEL: +86 21 63843300FAX:+86 21 63843301 Report Issued Date: Jan.23, 2019


Document Created: 2019-01-23 15:13:02
Document Modified: 2019-01-23 15:13:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC