Users Manual

FCC ID: 2AH25NB01X

Users Manual

Download: PDF
FCCID_4342074

POWER BANK Please read carefully this instruction manual before using the product, and keep it properly. 1 Connect the adapter DC plug adapted to POS machine to the input interface of the power bank; 2 Connect the AC power line plug of the adapter to the commercial power socket; 3 Plug the DC output line of the power bank in the input interface of POS machine; 4 Short press the power bank switch, and the indicator light is in working state when it is lit. • Short press for 1 second, and the power bank is awakened from sleep mode to boot; • Long press for 3 seconds, and the power bank is forced to power off from power-on state. 5 Multiple power bank can be used in tandem when longer usage is required. Output (device interface) LED 1 Power supply switch Input (adapter interface) LED 2 LED 3 LED 4/LED 5 4 5 3 2 1 The basic parameters Lamp status Alarm status Product Model NB010 NB011 Definition of discharge state Alarm status state frequency The length Contained Battery Type Li-Ion battery ElectricityC(%) LED1-5 state LED1-4 off Low level alarm LED5 blink continuous Battery rated energy 2500mAh/DC18V(45Wh) 5000mAh/DC18V(90Wh) LED1 LED2 LED3 LED4 LED5 buzzer A short sound continuous Rated Capacity 1500mAh/DC24V(36Wh) 3000mAh/DC24V(72Wh) C≥75% on on on on off Rated input DC24V/1.25A LED1-4 off 50%≤C＜75% off on on on off 0 electric alarm LED5 Normally on 60S Rated output DC24V/2.5A 25%≤C＜50% off off on on off buzzer sing 60S Input Interface DIN 4Pin 10%≤C＜25% off off off on off Output Interface DIN 4Pin LED1-4 off 0%＜C＜10% off off off off on Fault alarm LED5 4S on-1S off 60S Applicable Models SUNMI POS System buzzer 4S Ring-1S stop 60S (T1/T1 MINI/T2/T2 MINI/T2 LITE/D1/D2) Definition of charging state Overcharge voltage protection ElectricityC(%) LED1-5 state It depends on Overheat LED1-4 the power Over-discharge voltage protection LED1 LED2 LED3 LED4 LED5 protection alarm LED5 2S on-2S off continuous Over-temperature protection Full power on on on on off buzzer off Overcharge over-current protection Security C≥75% blink on on on off Discharge over-current protection off blink on on 50%≤C＜75% off Short-circuit protection 25%≤C＜50% off off blink on off Error-proof protection C＜25% off off off blink off Other Functions Low battery sound and light alarm Charging Temperature 5~45℃ Discharging Temperature -20~55℃ Size L168*W90*H48mm Net Weight 794g 1013g * Charging treasure must be within 5 ~ 45 ℃ environment temperature, and suggests that in 0 ℃ ~ 45 ℃ environment temperature range for discharge. Charging and discharging outside this temperature range will result in a sharp decrease in cell capacity and a shorter service time. Points for Attention Warning Suggestions ·It is forbidden to place the power supply into water, and forbidden to wet it in storage & usage. · Please use it according to the suggestions provided by the power supply instructions. ·It is forbidden to throw the power supply into fire or heat it. Far away from heat source & fire · Keep the device dry. Rain water, moisture and various liquids or water content are all possible source. It is forbidden to store the power supply when the temperature is above 60 ℃. to contain minerals, which will corrode the electronic circuit. If the device gets wet, please dry it ·It is forbidden to charge the power supply in fire source & extremely hot conditions! completely in the air. ·Please don’t use or store the power supply near the heat source! · Never use or store the device in a dusty or dirty place, otherwise its detachable parts & ·If the power supply is leaked or odor is given off, please remove it immediately from near the electronic elements will be destroyed. open fire. · Never place the device in an overheated place. High temperature will shorten the lifetime of ·Please use the dedicated charger! the electronic device, destroy the battery, cause certain plastic components to deform or melt. ·It is forbidden to short the positive & negative poles of the power supply with wire or other metal · Never place the device in a supercooled place, otherwise moisture will form inside the device objects. And it is forbidden to transport or store it with necklace, hair clip or other metal objects! when its temperature rises to normal temperature, which will destroy the circuit board. ·It is forbidden to shock, throw or mechanically vibrate the power supply, rough treatment to the · Never wash the device with strong chemicals, cleaning agent or strong lotion. device will destroy its sophisticated construction. · Never smear the device with pigment, which will cause foreign matter blockage in the ·It is forbidden to directly weld the power supply terminal! detachable parts and thus influencing the normal operation. ·As for the power supply, it is forbidden to pierce it with nail, shock it with hammer or tread it. And · Please put this product in a place unreachable to children or pets. it is forbidden to knock it with other methods. ·It is forbidden to dismantle, disassemble or change the external structure of the power supply. Statement Our company will not be responsible for the results of the following actions Important safety instructions · Damage caused by usage of this product on non-Sunmi products; Thanks for using this product. This product is a kind of dedicated power supply for high capacity · Damage caused by usage & maintenance not under the conditions of this guidance note; Sunmi desktop devices, which applies the charge & discharge chips of 18650 battery cell & TI · Our company will not be responsible for any damage or problem caused by any option or etc. with excellent performances in all aspects of safety, efficiency, capacity, etc. Please don’t consumable (not the initial product or recognized product provided by our company); (You use it on other non-Sunmi products! have no right to make product modifications or changes without the consent of our company) ·When connecting the charger to charge, the output of the charger needs to be match the input parameters in the specifications. Disclaimer ·When there are exceptions of liquid leakage, bulge & expansion, etc. in the product, please Due to the product update, certain details of this document may be inconsistent with the don’t use it any more and place it in a safe place. product. Please refer to the material item. Our company owns the interpretative right of this ·If the power supply gives off odor, gives out heat, deforms, changes color or has any other document. We reserve the right to modify this user guide without giving advance notice. exception, it is not allowed to go on using it; if the power supply is in use or being charged, you must immediately take it off the charger and stop usage! ·If the power supply gives off odor or gives out heat, changes color or deforms, leaks liquid or has any other exception, it is forbidden to connect the power supply to the charger or device. FCC Statement Name and content of toxic and harmful substances Any Changes or modifications not expressly approved by the party responsible for contained in this product are shown in the following table compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and Toxic and harmful substances and elements (2) This device must accept any interference received, including interference that may cause undesired operation. Name of parts Note: This equipment has been tested and found to comply with the limits for a （Pb） (Hg) (Cd) (Cr(VII) (PBB) (PBDE) Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a Circuit board residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, Battery pack may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which Shell can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Small structural —Reorient or relocate the receiving antenna. parts —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. :It indicates that the content of toxic and harmful substances in all homogeneous materials of this part is below the limit specified in SJ/T11363-2006. :It indicates that the content of toxic and harmful substances is higher than the limit specified in SJ/T11363-2006 in at least one homogeneous material of this part; however, the the reason why the toxic substance of that part exceeds the limit is that there is no applicable material to replace it currently. For products that have reached or passed the service years for environ- mental protection, they should be recycled according to Measures for Control and Management of Electronic Information Products and should not be thrown away at will. Package Contents Manufacture power bank x1 Shanghai Sunmi Technology Co.,Ltd. User guide x1 Room 505 No.388 Song Hu Road Shanghai, China 12610751-00 190211


Document Created: 2019-07-03 00:40:08
Document Modified: 2019-07-03 00:40:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC