User Manual

FCC ID: 2AGPFVB20

Users Manual

Download: PDF

        User Manual

Applicable models:
VB20, Vigor, Vigor U, Vigor X
VB SERIES, Gio, Bro, Eggo


INDEX
Description of hearing aid ............ - 1 -
ON/OFF function .......................... - 4 -
Inserting/Replacing the battery ... - 6 -
Attach dome (OF) ......................... - 8 -
Attach tubing (OF) ........................ - 9 -
Inserting/Removing hearing aids- 13 -
Operation of hearing aid ............ - 15 -
Switch control ............................. - 15 -


Pairing hearing aids with Android/iOS
device .......................................... - 19 -
FCC Statement .............................. - 21 -


Description of hearing aid




                    -1-


-2-


1. Front microphone input
2. Switch control
3. Rear microphone input (optional)
4. Battery door
5. Sound tube
6. Dome
7. Retention



                    -3-


ON/OFF function
1. When the battery door is closed, the
hearing aids on, and the default program will
be activated.
2. To turn off the hearing aids, partly open the
battery door.
Tip: Whenever the hearing aids are not in use,
remember to turn them off to avoid
unnecessary battery consumption.

                      -4-




Inserting/Replacing the battery
1. Open the battery door completely by using
your fingernail.
2. Remove the used battery if present. Insert
the new battery with the positive side in the
correct position. The battery door has a ‘+’
indicator to help determine the correct
insertion.
3. Gently close the battery door.

                     -6-


Tip: When the hearing aids are not in use for
an extended period of time, removing the
batteries may help prevent corrosion of the
battery compartment, and ensure that
battery life is not shortened.




                     -7-


Attach dome (OF)
Push the dome over the flanges on the thin
tube. Make sure that the new dome is
properly and securely mounted.
Gently press and twist the tube into
connector base until the tube is fixed firmly.




                     -8-


Attach tubing (OF)
Push the tube into connector
base of device, insert into the
recessed jack and rotate
clockwise about 3.5 turns until the
tube is fixed firmly .




                         -9-


Attach\remove tubing and dome (RITE)




                  - 10 -


  1.   receiver flange
  2.   receiver jack
  3.   receiver tube plug
  4.   receiver tube
  5.   connector base



1. Make sure the receiver tube plug is entirely
sheathed in the black receiver and insert into

                       - 11 -


a recessed jack.
2. Push the dome over the flanges on the
black receiver. Make sure that the new dome
is properly and securely mounted.
3. Gently press the receiver tube into
connector base of device, insert into a
recessed jack follow the red arrow until the
tube is fixed firmly.
4. Pull tubing off straightly.

                        - 12 -


Inserting/Removing hearing aids
Insertion
1. Hold the thin tube where it bends, and
gently push the dome into the ear canal. Push
the dome far enough into the ear canal so
that the thin tube lies flush with the head.
2. It is important that the tube and the dome
fit correctly into your ear.



                      - 13 -


3. When the dome is placed correctly, you
should not be able to see the thin tube
sticking out when facing a mirror.


Removal
1. Hold the thin tube with your thumb and
forefinger and pull the tube outward.
2. Consult hearing care professional if you
have difficulties removing the hearing aids.

                    - 14 -


Operation of hearing aid
Switch control
Volume control function: To increase volume
press then release the top part of the switch.
To decrease the volume, press then release
the bottom part
of the switch.
Memory switch
function:

                    - 15 -


Speech mode is the default programme. To
switch to next programme, holding the top
part of the switch for three seconds. The
programmes will be circulated from P1, P2,
P3 to P4.
Holding the down part of the switch for three
seconds. The programmes will be circulated
from P1, P4, P3 to P2.
You will hear one or more beeps.

                    - 16 -


The number of beeps indicates which
programme you have selected (one beep =
programme one, two beeps = programme
two, etc.).
When the hearing aid is turned off and then
back on, the hearing aid always returns to the
default setting (P1). Selected model will
returns to the program used last time.



                    - 17 -


   Top part of switch        Down part of switch
   P1:Speech mode            P1:Speech mode
   P2:Restaurant             P4:Outdoor Noise
   Noise
   P3:Road Noise             P3:Road Noise

   P4:Outdoor Noise          P2:Restaurant
                             Noise
   P1:Speech mode            P1:Speech mode
For the selected model, P4 is Telecoil mode.
                    - 18 -


Pairing hearing aids with Android/iOS device
Only available for selected models.
Hearing aids will stay in Bluetooth pairing
mode while they are turn on.


Ensure Bluetooth is enabled on iOS or
Android device. Open ControlHA app and tap
Bluetooth HA to allow APP connecting with
your hearing aids. App will show the hearing

                    - 19 -


aid connection status synchronous with the
tick icon in the top right corner.


Tap Bluetooth HA again to enter into Setting.
Select Left or Right and then tap Save to
finish the pairing process.
Hearing aids pairing will be done by App
automatically after your first time pairing
process.

                     - 20 -


FCC Statement
The device has been evaluated to meet
general RF exposure requirement, The device
can be used in portable exposure condition
without restriction Federal Communication
Commission (FCC) Radiation Exposure
Statement Power is so low that no RF
exposure calculation is needed.

This device complies with part 15 of the FCC
rules. Operation is subject to the following
two conditions: (1) this device may not cause
                    - 21 -


harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.

NOTE: The manufacturer is not responsible
for any radio or TV interference caused by
unauthorized modifications or changes to
this equipment. Such modifications or
changes could void the user’s authority to
operate the equipment.


                    - 22 -


NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in
                     - 23 -


a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the
following measures:
‐ Reorient or relocate the receiving
antenna.
‐ Increase the separation between the
equipment and receiver.


                   - 24 -


‐Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
‐ Consult the dealer or an experienced
radio/TV technician for help.

FCC ID: 2AGPFVB20




                    - 25 -



Document Created: 2019-06-05 16:30:56
Document Modified: 2019-06-05 16:30:56

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC