RF Exposure Info

FCC ID: 2AGDVLHL3

RF Exposure Info

Download: PDF
FCCID_4303899

SGS—CSTC Standards Technical Services Co., Ltd. Guangzhou Branch 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological Development District, Guangzhou, China 510663 Report No.: GZEM190301159803CR Telephone: +86 (0) 20 82155555 Page; 1 of 2 Fax: +86 (0) 20 82075059 Email: ee.guangzhou@sgs.com FCC ID: 2AGDVLHL3 RF Exposure Compliance Requirement The product belongs to standalone portable device base the FCC rule part 2.1091&2.1093. The transmission frequencies of the device are between 100 MHz and 6 GHz. The worst case test separation distance is 5mm. The Max Conducted Output Power and SAR Test Exclusion Threshold (mW) are listed below: , Max Conducted Output Power Transmit frequency (GHz) Power[dBm] (mW) 2 402 —3.288 0.469 2 442 —6.321 0.233 2480 —8.432 0.144 The Max Conducted Peak Output Power is —3.288dBm on the lowest channel 2.402GHz —3.288dBm logarithmic terms convert to numeric result is nearly 0.47mW(the maximum power in three transmit frequencies) According to the formula, calculate the test exclusion thresholds: [{max. power of channel, including tune—up tolerance, mW)/ (min. test separation distance, mm)] _« [~Vf(GHz)] General RF Exposure = (0.47mW /5 mm ) x V2.402GHz= 015 @; SAR requirement: S =3.0 @; O <@. So the SAR report is not required. The SAR Test Exclusion Threshold for 100 MHz to 6 GHz is calculated from: 1) The 1—g and 10—g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances Unless otherwize agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed cvariont, available on request or accesslble at htipii/www sg5.comfan/Tarms—and—Conditions aspy and, for ulr:.:h-mr_r\nn-nardnrur".nnts subject ho Terms and Conditions for Electronic Documents a —Condili m.?m‘;sm&flm Attention is drenim to the fimitation of Ilabllll:.l indemnafication an juris iction issuwesdefined therein. n'|- rolder of this document is adviseo that Information contained hereon refects the Company‘s fndings at the time of is Inben antiononly and within the limits of Client‘s Instructions, if any, The Company‘s sole r\qapnfialhllll:r- is to Its C#ent arm this dociment does nu:,\gI exonarale partias io a transaction fromexercising all their rights and obligations under the transaction documents. This d..ll.l.'ll!r\ll cannol be reproduced _ «5 except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsi#ficabion of the content or rlft Fiz l -'_ i|-, x appenramon nd this document is undawful and oMendars may be prosncuted to the fullast axMHt af the law, Uniass athanwise atatad the on & Teiing fervices ,;E reaulls #hown in Ihis beet report refer only to the samplefs) lasled and auch sample(s) are relained for 30 days only. Aitention: To checkthe aut henticlty of tesling Imapection report & certihicate, please contact ue at telephone: (B6—758) 007 14431 oramail. CN.Drvee beckn.u..-uh .etan mmrmnmm Gengtou Ecaome & Taciroogy Devsoprent Delrd, Guenpoe, Chire 510603 t (R6—200EMSRESS 1 (BG—X) OOEDSE aewwiegeproup.comen tE ~]H +Eipi Aor #E HoemiHch on# t# : si0oor 1 (@O—}MISES 1 (Do—A) oK spcini@sgs.com I Mamber of the SGS Group (SGS SA)

SGS—CSTC Standards Technical Services Co., Ltd. Guangzhou Branch 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological — Development District, Guangzhou, China 510663 Report No.: GZEM190301159803CR Telephone: +86 (0) 20 82155555 Page; 2 of 2 Fax: +86 (0) 20 82075059 Email: ee.guangzhou@sgs.com FCC ID: 2AGDVLHL3 =< 50 mm are determined by: [{max. power of channel, including tune—up tolerance, mW)/{min. test separation distance, mm)] © [~f(GHz)] < 3.0 for 1—g SAR and = 7.5 for 10—g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is = 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. According to SAR Exclusion Threshold in KDB 447498 (DO1) General RF Exposure Guidance v06, the SAR report is not required. Unless otherwize agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed cvariont, available on request or accesslble at htipiitwww s95.comfan/Tarms—and—Conditions_aspy and, for alectronic format documents, subject ho Terms and Conditions for Electronic Documents al M & ~Condliticnsi Teron: C Attention is drewinm to the fimitation of liability, indemnafication and juniediction issues detined therein. Any hokder this wumuul is advised that Information contained hereon refects the Company‘s fndings at the time of its Intervantion only and wrlh n the: limits of Client‘s Instructions, if any, The Company‘s sole responalbllity is to Its CBent and this docement does nogl exonarale partias io a transaction fromexercising all their rights and obligations under the transaction documents. This document cannol be reproduced except in full, without prior written approval of the Cnl—nnnv Any unauthorized alteration, forgery or falsificabion of the content or Felt Palis Blak al appenramon of this document is unlawlul and ofandars may ba prosacutad to the fullaat axtant of the law Uniass otharaise atatad the .m,“'l.m“ Serices ,£ reaulle b'lb'fl'llin this bast report refer only to the samplefs) besled and auch sample(s) are relained for 30 days only. Aitention: To checkthe authenticity of tesling Ispection report & cortificate, please contact us at tv'"ph-:-nc (®D—758}EO0T 1441 pramail: CN. Ooechaek@#pn. en ‘1,| No B KestuFoed, Eneniech Park, Gungefou Ercaome & Tachrology Devéoprent Delrct Guenpton, Chire 510603 t (R6—200EMIERESS 1 (BG—£) BAOESE wewwiegeproup.comen Cuargztoy Pmd C Laboratory ¢|l~1TM Sfiaor #ERHorkiHcki 198 ##i— si0ooa (@0—eSE 1 (Do—A) ToKe spcinaisgs.com Mamber of the SGS Group (SGS SA)


Document Created: 2019-05-30 06:24:37
Document Modified: 2019-05-30 06:24:37
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC