1982084R-FCC-RF Exposure-LED Lamp

FCC ID: 2AGBW9290022275X

RF Exposure Info

Download: PDF
FCCID_4473898

RF Exposure Evaluation Declaration Product Name : LED lamp Model No. : 9290022275 FCC ID : 2AGBW9290022275X Applicant : Signify (China) Investment Co., Ltd. Address : Building no.9, Lane 888, Tianlin Road, Minhang District, Shanghai 200233, China Date of Receipt : Aug. 08, 2019 Test Date : Aug. 10, 2019 ~ Aug. 30, 2019 Issued Date : Sep. 05, 2019 Report No. : 1982084R-RF-US-P20V01 Report Version : V1.0 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing CB Testing Laboratory. The measurement result is considered in conformance with the requirement if it is within the prescribed limit, It is not necessary to calculate the uncertainty associated with the measurement result. This report is not used for social proof in China (or Mainland China) market.

Report No: 1982084R-RF-US-P20V01 Tes t R e p o r t C e r t i f i c a t i o n Issued Date : Sep. 05, 2019 Report No. : 1982084R-RF-US-P20V01 Product Name : LED lamp Applicant : Signify (China) Investment Co., Ltd. Address : Building no.9, Lane 888, Tianlin Road, Minhang District, Shanghai 200233, China Manufacturer : Signify (China) Investment Co., Ltd. Address : Building no.9, Lane 888, Tianlin Road, Minhang District, Shanghai 200233, China Model No. : 9290022275 FCC ID : 2AGBW9290022275X Brand Name : PHILIPS EUT Voltage : 110-130 Vac, 50-60 Hz, 7W Test Voltage : AC 120V/60Hz Applicable Standard : KDB 447498D01V06 FCC Part1.1310 Test Result : Complied Performed Location : DEKRA Testing & Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Designation Number: CN1199 Documented By : (Project Assistant: Kitty Li) Reviewed By : (Senior Engineer: Frank He ) Approved By : (Engineer Supervisor: Jack Zhang ) Page: 2 of 5

Report No: 1982084R-RF-US-P20V01 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Electric Magnetic Power Average Frequency Field Field Density Time Range (MHz) Strength Strength (mW/cm2) (Minutes) (V/m) (A/m) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where 2 Pd = power density in mW/ cm Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2 Pd is the limit of MPE, 1 mW/cm . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Page: 3 of 5

Report No: 1982084R-RF-US-P20V01 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18℃and 78％ RH. 1.3. Test Result of RF Exposure Evaluation Product : LED lamp Test Item : RF Exposure Evaluation Test Site : AC-6  Antenna Information: Antenna manufacturer N/A Antenna Delivery 1*TX+1*RX 2*TX+2*RX 3*TX+3*RX Antenna technology SISO Basic MIMO CDD Beam-forming Antenna Type External Dipole PIFA PCB Ceramic Chip Antenna Internal Stamping Antenna Metal plate type F antenna Monopole antenna Antenna Gain 0dBi Page: 4 of 5

Report No: 1982084R-RF-US-P20V01  Power Density: The tune-up power is 1dB, so the maximum conducted power of BT we used to calculate RF exposure is 9.23dBm. The tune-up power is 1dB, so the maximum conducted power of Zigbee we used to calculate RF exposure is 9.03dBm. Limit of Power Power Density Frequency Band EIRP Test Mode Density at R = 20 cm (MHz) (dBm) 2 2 S(mW/cm ) (mW/cm ) BT 2400 ~ 2483.5 9.23 1 0.0017 Zigbee 2400 ~ 2483.5 9.03 1 0.0016 Note: 2 The maximum power density is 0.0017mW/cm for LED lamp without any other radio equipment. The End Page: 5 of 5


Document Created: 2019-10-10 09:17:40
Document Modified: 2019-10-10 09:17:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC