Modular Approval Letter

FCC ID: 2AGBW9290019684X

Cover Letter(s)

Download: PDF
FCCID_4055226

Philips Lighting(China) Investment Co.,Ltd. Date (25/10/2018) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Dear Sir/Madam, RE: Modular Approval Request for Model: FCC ID: 2AGBW9290019684X The following attestation addresses the requirements to support modular approval: Modular approval requirement Yes (provide brief No * statement) (a) The radio elements must have the radio frequency Yes, the radio portion of circuitry shielded. Physical components and tuning the module is contained in capacitor(s) may be located external to the shield, but its owe RF shielding. See must be on the module assembly external photos in Exhibits. (b) The module must have buffered modulation/data Yes, module uses inputs to ensure that the device will comply with Part 15 buffered modulation/data requirements with any type of input signal inputs. (c) The module must contain power supply regulation on Yes, module contains the module power supply regulation. (d) The module must contain a permanently attached Yes, the transmitter is antenna, or contain a unique antenna connector, and be used with the tested marketed and operated only with specific antenna(s), per integral antenna. Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b)

Philips Lighting(China) Investment Co.,Ltd. (e) The module must demonstrate compliance in a Yes, the module was stand-alone configuration tested in a stand-alone configuration. See test photo Exhibit. (f) The module must be labelled with its permanently Yes, the module will be affixed FCC ID label, or use an electronic display (See labelled with its own FCC KDB Publication 784748 about labelling requirements) ID number. See related exhibit. If the module is installed inside of an end- product, the label will not be Visible. In this case the OEM customer will be instructed to how to apply the exterior label. (g) The module must comply with all specific rules Yes, the module is applicable to the transmitter. The grantee must provide compliance with all comprehensive instructions to explain compliance applicable FCC rules. requirements Detail instructions are given in the User’s Manual. (h) The module must comply with RF exposure Yes, see RF exposure requirements exhibit. * Please provide a detailed explanation if the answer is “No.” Kind Regards Name : Yefeng Zhang Title : Approbation Manager


Document Created: 2018-10-29 23:39:00
Document Modified: 2018-10-29 23:39:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC