Test Report

FCC ID: 2AG8M-SP13

Test Report

Download: PDF
FCCID_4355554

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 1 of 30 TEST REPORT Application No.: SZEM1906014929CR Applicant: Shenzhen Trainertec Electronic Co., Ltd Address of Applicant: 4F, 1Blg, Dezhong Industry Park, Bantian District, Shenzhen, China Manufacturer: Shenzhen Trainertec Electronic Co., Ltd Address of Manufacturer: 4F, 1Blg, Dezhong Industry Park, Bantian District, Shenzhen, China Equipment Under Test (EUT): EUT Name: remote spray dog training collar Model No.: SP13, SP14, SP15 ♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. FCC ID: 2AG8M-SP13 Standard(s) : 47 CFR Part 15, Subpart C 15.231 Date of Receipt: 2019-06-06 Date of Test: 2019-06-07 to 2019-06-14 Date of Issue: 2019-06-18 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Keny Xu EMC Laboratory Manager

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 2 of 30 Revision Record Version Chapter Date Modifier Remark 01 2019-06-18 Original Authorized for issue by: Bill Chen /Project Engineer Eric Fu /Reviewer

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 3 of 30 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result 47 CFR Part 15, 47 CFR Part 15, Subpart Antenna Requirement N/A Pass Subpart C 15.231 C 15.203 N/A: Not applicable Radio Spectrum Matter Part Item Standard Method Requirement Result 47 CFR Part 15, ANSI C63.10 (2013) 47 CFR Part 15, Subpart 20dB Bandwidth Pass Subpart C 15.231 Section 6.9 C 15.231(c) Dwell Time 47 CFR Part 15, ANSI C63.10 (2013) 47 CFR Part 15, Subpart Pass (15.231(a)) Subpart C 15.231 Section 7.8.4 C 15.231(a) Field Strength of the 47 CFR Part 15, ANSI C63.10 (2013) 47 CFR Part 15C Section Fundamental Signal Pass Subpart C 15.231 Section 6.5 15.231(b) (15.231(b)) 47 CFR Part 15, ANSI C63.10 (2013) 47 CFR Part 15C Section Radiated Emissions Pass Subpart C 15.231 Section 6.4&6.5&6.6 15.231(b) and 15.209 N/A: Not applicable Declaration of EUT Family Grouping: Model No.: SP13, SP14, SP15 Only the model SP13 was tested, since the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, with only difference on appearance with color and logo(trade mark).

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 4 of 30 3 Contents Page 1 COVER PAGE ...... ... cccncneeeenener en en nererereeen en en nen en eb nen en en nen en en nenenerereenen en e neneneeenenen en en nen en en nen en en nenennnn 1 2 TEST SUMMARY .... ... cce 00e 6e6ereerererere e en erereerererereerer en en nen en en nenenerereenen enb nen en en en nen en en nen en en nen en en nene 3 3 CONTENTS. 4 GENERAL INFORMATION ......... o0 eeeremreereereeermereeermereeermereeermerereeneneereeenmeereeenmeereennnenrenrnne 5 4.1 DETAILS OF E—ULT ; .. 220 en en en en m en eere en en e en en en en en en en en en en en en en eneve en en evee en enevee en enevneeenenenee n 5 4.2 Description or Support Units .5 4.3 MEASUREMENT UNCERTAINTY ..... .5 4.4 TEST LOCATION .6 4.5 TEest Faciuty.. .6 4.6 DEVIATION FROM STANDARDS. .6 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..... .. ... . en en en eene m en en en en en en en en en en en en enevnenenenene 6 5 EQUIPMENT LIST ...... .ce eeeremreermmereeermereeermereeermereeermereeermerereenereeenmeeneereeenmeereennmeereeennnenre en 7 6 RADIO SPECTRUM TECHNICAL REQUIREMENT .........0.000000 0e eeermeereeermeeneereennmeerereennmerennmeeren n 9 6.1 ANTENNA REQUIREMENT .. .9 6.1.1 Test Requirement:..... .9 6.1.2 CONGIUSION ............l.ccsceereeememereveveerereeeenrereeenerereeenerereeenerereveeneneneneenenennenev en neneveenenenevnenenenevee n 9 7 RADIO SPECTRUM MATTER TEST RESULTS .......... cce eememmeeermnereeermereeermeneereeenmnmeereenmeereennmenrenee 10 7.1 200B BANDWIDTH.... 7.1.1 EU.T. Operation 7.1.2 Test S@tup Di@graM ....c.c.cclll 7.1.3 Measurement Procedure and Data. 7.2 DweLL Time (15.231(A)) 7.2.1 E.U.T. Operation.. 7.2.2 Test Setup Diagram 7.2.3 Measurement Procedure and Data. 7.3 DUTY CYOE .cesn en mm emeenemeemeeennenenee. 7.4 FIELD STRENGTH OF THE FUNDAMENTAL SighaL (15.231(B)). 7.4.1 E.U.T. Operation.. 7.4.2 Test Setup Diagram 7.4.3 Measurement Procedure and Data. 7.5 RADIATED EMISSIONS ........c.c cce 7.5.1 EU.T. Operation..... 7.5.2 Test Setup Diagram .. 7.5.3 M@ASUF@M@Nt PrOCB@UU@ @MQ DBIA................cccccceeemerememeemereremeenerereneeneeneneneneneeneneneeneneneneree n 23 8 PHOTOGRAPHS........ ... cecenneeeererererereerererereerererereerererereeren en en nen en en nen en en en nen en nennen en en nenenennenennvnenenennene 30 8.1 TEST SETUP ... cessn en en eeenenenenrneenen en 8.2 EUT ConstructionaL DetaiLs (EUT PHotos) Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http/www.sqs.comen/Terms—and—Conditions.aspx and, for electronic format documents, Subjectis Tarms and Gonditions for Rleattonte Doouments at MipuJwin.age.comen/Tensang:Gondliionsrterms—0—Dceument.aaps. Attention is drawn to the limitation of lability, indamnification and Jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company‘s findings at the time of its intervention only and within the limits of Client‘s instructions, If any. The Company‘s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exereising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or tug 7. appearance of this document is unlawiul and offendars may be prosecuted to the fullest extent of the law. Unlss otherwise stated the ng Sevicss § results shown in this test report !eferonl¥lo the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing /inspection report & certificate, please contact us at telephone: (06—755) 8307 1443 2/ ‘ ds or email: CN.Doccheck@sgs.com No.t Wortshop, —10,e Secton, Science 8 Technology Pars Shenzhen, Clina 518057 t (86—755) 26012053 1 (86—758)26710504 wimsgsgroup.com.en StowbenBont Clatormioy MB +2001— AARchEN—108—S1B #B4i: 518057 t (B6—758)26012053 1 (@6—755) 26710504 sos china@sys.com t Member of the SGS Group (SGS SA)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 5 of 30 4 General Information 4.1 Details of E.U.T. Power supply: Tx:DC 3.0V by 1.5V x 2"AAA" batteries Operation Frequency: 433.91MHz Modulation Type: FSK Sample Type: Portable production Antenna Type: Spring Antenna Antenna Gain: 1.5dBi 4.2 Description of Support Units The EUT has been tested as an independent unit. 4.3 Measurement Uncertainty No. Item Measurement Uncertainty 1 Duty cycle ± 0.37% 2 20dB Bandwidth ± 3% 3 Dwell Time ± 3% 4 E-Field ± 4.5dB (Below 1GHz) 5 RF power density ± 2.84dB ± 4.5dB (Below 1GHz) 6 Radiated Spurious emission test ± 4.8dB (Above 1GHz) 7 Temperature test ± 1°C 8 Humidity test ± 3% 9 Supply voltages ± 1.5% 10 Time ± 3%

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 6 of 30 4.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 4.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 4.6 Deviation from Standards None 4.7 Abnormalities from Standard Conditions None

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 7 of 30 5 Equipment List 20dB Bandwidth Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date DC Power Supply ZhaoXin RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSP SEM004-06 2018-09-27 2019-09-26 JS1120-2 Measurement Software JS Tonscend N/A N/A N/A BT/WIFI V2. Coaxial Cable SGS N/A SEM031-02 2018-07-12 2019-07-11 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz NRVS SEM014-02 2018-09-25 2019-09-24 Dwell Time (15.231(a)) Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date DC Power Supply ZhaoXin RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSP SEM004-06 2018-09-27 2019-09-26 JS1120-2 Measurement Software JS Tonscend N/A N/A N/A BT/WIFI V2. Coaxial Cable SGS N/A SEM031-02 2018-07-12 2019-07-11 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz NRVS SEM014-02 2018-09-25 2019-09-24 Field Strength of the Fundamental Signal (15.231(b)) Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date 3m Semi-Anechoic ETS-LINDGREN N/A SEM001-01 2017-08-05 2020-08-04 Chamber e3 V8.2014-6- Measurement Software AUDIX N/A N/A N/A 27 Coaxial Cable SGS N/A SEM025-01 2018-07-12 2019-07-11 EMI Test Receiver Agilent Technologies N9038A SEM004-05 2018-09-25 2019-09-24 BiConiLog Antenna ETS-LINDGREN 3142C SEM003-01 2017-06-27 2020-06-26 (26-3000MHz) Pre-amplifier Agilent Technologies 8447D SEM005-01 2019-04-01 2020-03-31 (0.1-1300MHz)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 8 of 30 RE in Chamber Test Equipment Manufacturer Model No. Inventory No. Cal. Date Cal. Due date 3m Semi-Anechoic ETS-LINDGREN N/A SEM001-01 2017-08-05 2020-08-04 Chamber MXE EMI Receiver Agilent Technologies N9038A SEM004-05 2018-09-25 2019-09-24 (20Hz-8.4GHz) BiConiLog Antenna ETS-LINDGREN 3142C SEM003-01 2017-06-27 2020-06-26 (26-3000MHz) Pre-amplifier Agilent Technologies 8447D SEM005-01 2019-04-01 2020-03-31 (0.1-1300MHz) e3 V8.2014-6- N/A Measurement Software AUDIX N/A N/A 27 Coaxial Cable SGS N/A SEM025-01 2018-07-12 2019-07-11 General used equipment Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shanghai Humidity/ Temperature Meteorological ZJ1-2B SEM002-03 2018-09-27 2019-09-26 Indicator Industry Factory Shanghai Humidity/ Temperature Meteorological ZJ1-2B SEM002-04 2018-09-27 2019-09-26 Indicator Industry Factory Humidity/ Temperature Mingle N/A SEM002-08 2018-09-27 2019-09-26 Indicator Changchun Barometer Meteorological DYM3 SEM002-01 2019-04-04 2020-04-03 Industry Factory

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 9 of 30 6 Radio Spectrum Technical Requirement 6.1 Antenna Requirement 6.1.1 Test Requirement: 47 CFR Part 15, Subpart C 15.203 6.1.2 Conclusion Standard Requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit permanently attached antenna or of an so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. EUT Antenna: The antenna is integrated on the main PCB and no consideration of replacement. The best case gain of the antenna is 1.5dBi Antenna location: Refer to Appendix(Internal photos)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 10 of 30 7 Radio Spectrum Matter Test Results 7.1 20dB Bandwidth Test Requirement 47 CFR Part 15, Subpart C 15.231(c) Test Method: ANSI C63.10 (2013) Section 6.9 Limit: Frequency range(MHz) Limit 70-900 No wider than 0.25% of the center frequency Above 900 No wider than 0.5% of the center frequency 7.1.1 E.U.T. Operation Operating Environment: Temperature: 24.6 °C Humidity: 53.5 % RH Atmospheric Pressure: 1005 mbar Test mode a:TX mode_Keep the EUT in transmitting with modulation mode. 7.1.2 Test Setup Diagram 7.1.3 Measurement Procedure and Data

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 11 of 30 Test channel 20dB Bandwidth (KHz) Limit (KHz) Results 433.91MHz 86.218 1084.775 Pass Mode:a * RBW 3 kHz Delta 1 [T1 ] * VBW 10 kHz 0.02 dB Ref 10 dBm * Att 10 dB SWT 25 ms 86.217948720 kHz 10 Marker 1 [T1 ] -34.79 dBm 0 433.865710256 MHz A Marker 2 [T1 ] 1 PK -14.50 dBm VIEW -10 433.944235897 MHz 2 -20 -30 1 1 D1 -34.5 dBm -40 3DB -50 -60 -70 -80 -90 Center 433.9093 MHz 20 kHz/ Span 200 kHz

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 12 of 30 7.2 Dwell Time (15.231(a)) Test Requirement 47 CFR Part 15, Subpart C 15.231(a) Test Method: ANSI C63.10 (2013) Section 7.8.4 Limit: Device type Limit The switch automatically deactivate the Manually operated transmitter transmitter within not more than 5 seconds of being released Cease transmission within 5 seconds after Automatically actived transmitter activation Periodic transmissions to determine system integrity of The total transmission time does not exceed transmitters used in security or safety applications 2 seconds per hour 7.2.1 E.U.T. Operation Operating Environment: Temperature: 24.6 °C Humidity: 53.5 % RH Atmospheric Pressure: 1005 mbar Test mode a:TX mode_Keep the EUT in transmitting with modulation mode. 7.2.2 Test Setup Diagram 7.2.3 Measurement Procedure and Data

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 13 of 30 Test item Limit (MHz) Results Transmitting time <55 Pass ® rew 1 nz *vBw 3 Miz Ref 10 dBm att 10 ds SwT 10 s 10 Eo jEs sor BB > bE—ro F—20 30B bozo paroureAc antiytovl ulc sAupudt udhlucntnicer ——80 ~80 Center 433.9093 MHz 1 s/ Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http/www.sqs.comen/Terms—and—Conditions.aspx and, for electronic format documents, Subjectis Tarms and Gonditions for Rleattonte Doouments at MipuJwin.age.comen/Tens ang: Gondliionsrterms—0— Dceument.aaps. Aitanton is draen to the Imitation or eptly, indamniization and juredieton ‘esuse deined therein, Any holder of this dooumant is advised that information contained hereon reflects the Company‘s findings at the time of its intervention only and within the limits of Client‘s instructions, if any. The Company‘s sole responsibilty is to its Client and this document does not exonerate parties to a transaction from exereising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearanceof this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample() tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing /inspection report & certificate, please contact us at telephone: (06—755) 8307 1443 or email: CN.Doccheck@sgs.com No.t Wortshop, —10,e Secton, Science 8 Technology Pars Shenzhen, Clina 518057 t (86—755) 26012053 1 (86—758)26710504 wimsgsgroup.com.en B —R0l— ARBRdhEN—108—S1B #B4i: s18057__t (€6—755)26012050_f (@6—755) 26710504 sqschina@sgs.com I Member of the SGS Group (SGS SA)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 14 of 30 7.3 Duty Cycle Test Requirement: 47 CFR Part 15C Section 15.35 (c) Test Method: ANSI C63.10:2013 Test Setup: Limit: N/A Test Mode: Transmitting mode Instruments Used: Refer to section 5 for details Test Results: Pass

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 15 of 30 Test plot as follows: Duty cycle numbers RBW 3 MHz VBW 10 MHz Ref 10 dBm * Att 10 dB SWT 200 ms 10 A 0 SGL 1 PK * VIEW -10 -20 -30 -40 3DB -50 -60 -70 -80 -90 Center 433.9093 MHz 20 ms/ RBW 3 MHz Delta 1 [T1 ] VBW 10 MHz -0.02 dB Ref 10 dBm * Att 10 dB SWT 100 ms 49.839744 ms 10 Marker 1 [T1 ] -17.94 dBm 0 19.230769 ms A Delta 2 [T1 ] SGL 1 PK * -1.09 dB VIEW -10 15.705128 ms 1 2 1 -20 -30 -40 3DB -50 -60 -70 -80 -90 Center 433.9093 MHz 10 ms/

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 16 of 30 7.4 Field Strength of the Fundamental Signal (15.231(b)) Test Requirement 47 CFR Part 15, Subpart C 15.231(b) Test Method: ANSI C63.10 (2013) Section 6.5 Measurement Distance: 3m Limit: Fundamental Field strength of Field strength of spurious frequency(MHz) fundamental(microvolts/meter) emissions(microvolts/meter) 40.66-40.70 2250 225 70-130 1250 125 130-174 1250 to 3750 125 to 375 174-260 3750 375 260-470 3750 to 12500 375 to 1250 Above 470 12500 1250 Remark: the emission limit is based on measurement instrumentation employing an average detector at a distance of 3 meters. The frequencies above 1000MHz are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 17 of 30 7.4.1 E.U.T. Operation Operating Environment: Temperature: 23.7 °C Humidity: 54.1 % RH Atmospheric Pressure: 1005 mbar Test mode a:TX mode_Keep the EUT in transmitting with modulation mode. 7.4.2 Test Setup Diagram

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 18 of 30 7.4.3 Measurement Procedure and Data a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 or 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at a 3 meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. d. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. h. The radiation measurements are performed in X, Y, Z axis positioning. And found the X axis positioning which it is worse case, only the test worst case mode is recorded in the report. Remark: Level= Read Level+ Cable Loss+ Antenna Factor- Preamp Factor

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 19 of 30 Average value: Average value=Peak value + PDCF Calculate Formula: PDCF=20 log(Duty cycle)= 20 log(15.71/49.84) Duty cycle= T on time / T period Ton time = 15.71ms Test data: T period =49.84ms new s ane vaw 20 w *ace 10 as sut 200 me «s Canter 433.9093 iz 20 me/ rew 3 uns berta 1 (mi j vem 10 ie ~0.02 as Rree 10 azn tare 20 as swz 200 ns 49.839744 me wanefs 2 (m]) —r]. 94 2 m —]. o —so Center 433,0093 imz 10 me/ Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overieaf, available on request or accessible at hitp:\wiww.sgs.comen/Terms—and—Conditions.aspx and, for electronic format documents, Subjectis Tarms and Gonditions for RleattonteMipuJwin.age.comen/Tens Doouments at ang:Gondliionsrterms—0—Dceument.aaps. Attention is drawn to the limitation of lability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company‘s findings at the time of its intervention only and within the limits of Client‘s instructions, if any. The Company‘s sole responsibility is to its Client and this document does not exonerate parties to a fransaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Gompany. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Aftention: To check the authenticity of testing /inspection report & certificate, please contact us at telephone: (86—755) 8307 1443 or email: CN.Doccheck@sgs.com Lid No.t Wortshap, —10,e Secton, Science 8 Technology Pars Shenzhen, China 518057 t (86—755) 26012053 1 (86—758) 26710504 wimsgsgroup.com.en Clatomioy MB +2001— AARchEN—108—S1B AB#: s1a057 t (B6—758) 28012058 1 (86—755)26710504 sgs.china@sys.com t Member of the SGS Group (SGS SA)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 20 of 30 Peak value: Cable Antenna Preamp Read Over Frequency Level Limit Line Loss Factor Factor Level Limit Polarization (MHz) (dBuV/m) (dBuV/m) (dB) (dB/m) (dB) (dBuV) (dB) 433.91 2.35 23.2 27.57 89.85 87.83 100.82 -12.99 Horizontal 433.91 2.35 23.2 27.57 80.17 78.15 100.82 -22.67 Vertical Average Value: Frequency Average Level PCDF Limit Line (dBuV/m) Over Limit (dB) Polarization (MHz) (dBuV/m) 433.91 77.8 80.82 -3.02 Horizontal -10.03 433.91 68.12 80.82 -12.7 Vertical

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 21 of 30 7.5 Radiated Emissions Test Requirement 47 CFR Part 15, Subpart C Section 15.231 (b)/15.209 Test Method: ANSI C63.10 (2013) Section 6.4&6.5&6.6 Measurement Distance: 3m Limit: Field Measurement Frequency(MHz) strength(microvolts/meter) distance(meters) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.0 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 Remark: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90kHz, 110-490kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 22 of 30 7.5.1 E.U.T. Operation Operating Environment: Temperature: 20 °C Humidity: 54 % RH Atmospheric Pressure: 1005 mbar Test mode a:TX mode_Keep the EUT in transmitting with modulation mode. 7.5.2 Test Setup Diagram

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 23 of 30 7.5.3 Measurement Procedure and Data a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 or 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at a 3 meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. d. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. h. The radiation measurements are performed in X, Y, Z axis positioning. And found the X axis positioning which it is worse case, only the test worst case mode is recorded in the report. Remark: Level= Read Level+ Cable Loss+ Antenna Factor- Preamp Factor

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 24 of 30 Average value: Average value=Peak value + PDCF Calculate Formula: PDCF=20 log(Duty cycle)= 20 log(15.71/49.84)=—10.03 Duty cycle= T on time / T period Ton time = 15.71ms Test data: T period =49.84ms son 3 mue ver 10 mue aet 10 dsn rase 10 ce sez 200 ns cso Gentee 433. 0003 ie 20 ma/ san 3 ie oersa i pri d vae 10 ine —o.02 as ses 10 ssn tase 10 ce swz 100 ns as.e30704. ns made i mJ caf.es im —].0s css Center 433.0003 ue 10 may Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overieaf, available on request or accessible at hitp:\wiww.sgs.comen/Terms—and—Conditions.aspx and, for electronic format documents, Subjectis Tarms and Gonditions for RleattonteMipuJwin.age.comen/Tens Doouments at ang: Gondliionsrterms—0— Dceument.aaps. Aitanton is draen to the Imitation or eptly, indamniization and therein, juredieton ‘esuse deined Any holder of this dooumant is advised that information contained hereon reflects the Company‘s findings at the time of its intervention only and within the limits of Client‘s instructions, if any. The Company‘s sole responsibility is to its Client and this document does not exonerate parties to a fransaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Gompany. Any unauthorized alteration, forgery or falsification of the content or 4 eb appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. P/\msmclm& T!s(mg Seviess J Aftention: To check the authenticity of testing /inspection report & certificate, please contact us at telephone: (86—755) 8307 1443 or email: CN.Doccheck@sas.com Ny Lt No.t Wortshop, M—10, Midde Secton, Scince 8 Technology Par: Shenzhen, Clina 518057 MB +2001— AARchEN—108—S1B AB#: s1a057 t (€6—758)26012058 1 (86—755) 26710504 t (€6—758) 260120581 (@6—755) 26710504 winsgegroup.comn sqschina@sgs.com t Member of the SGS Group (SGS SA)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 25 of 30 30MHz~1GHz QP value: Mode: a; Polarization: Horizontal

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 26 of 30 Mode: a; Polarization: Vertical

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 27 of 30 Above 1GHz Mode:a; Polarization:Horizontal

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 28 of 30 Mode:a; Polarization:Vertical

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 29 of 30 Remark: 1) The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic equation with a sample calculation is as follows: Final Test Level =Receiver Reading + Antenna Factor + Cable Factor – Preamplifier Factor 2) Scan from 9kHz to 5GHz, the disturbance below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. The amplitude of spurious emissions from the radiator which are attenuated more than 20dB below the limit need not be reported. 3) As shown in this section, for frequencies above 1GHz, the field strength limits are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. So, only the peak measurements were shown in the report.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601492902 Page: 30 of 30 8 Photographs 8.1 Test Setup Refer to Setup Photos 8.2 EUT Constructional Details (EUT Photos) Refer to EUT external and internal photos - End of the Report -


Document Created: 2019-07-11 08:01:32
Document Modified: 2019-07-11 08:01:32
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC