RF Exposure

FCC ID: 2AG7G-C1A

RF Exposure Info

Download: PDF
FCCID_4267524

RF EXPOSURE EVALUATION REPORT Report No. : FA912813A RF EXPOSURE EVALUATION REPORT FCC ID : 2AG7G-C1A Equipment : Plume PowerPod Brand Name : Plume Design Inc Model Name : C1A Applicant : Plume Design Inc 290 S California Ave, Suite 200, Palo Alto, CA 94306, USA Manufacturer : Plume Design Inc 290 S California Ave, Suite 200, Palo Alto, CA 94306, USA Standard : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL INC has been evaluated in accordance with 47 CFR Part 2.1091 for the device and pass the limit. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any agency of government. The results in this variant report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Approved by: Cona Huang / Deputy Manager SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page : 1 of 7 FAX : 886-3-328-4978 Issued Date : Apr. 23, 2019 Form version: 180516

RF EXPOSURE EVALUATION REPORT Report No. : FA912813A Table of Contents 1. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 4 2. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 5 3. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 6 4. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 7 4.1. Standalone Power Density Calculation ............................................................................................. 7 4.2. Collocated Power Density Calculation ............................................................................................... 7 TEL : 886-3-327-3456 Page : 2 of 7 FAX : 886-3-328-4978 Issued Date : Apr. 23, 2019 Form version: 180516

RF EXPOSURE EVALUATION REPORT Report No. : FA912813A History of this test report Report No. Version Description Issued Date FA912813A Rev. 01 Initial issue of report Apr. 23, 2019 TEL : 886-3-327-3456 Page : 3 of 7 FAX : 886-3-328-4978 Issued Date : Apr. 23, 2019 Form version: 180516

RF EXPOSURE EVALUATION REPORT Report No. : FA912813A 1. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type Plume PowerPod Brand Name Plume Design Inc Model Name C1A FCC ID 2AG7G-C1A Wireless Technology and WLAN 2.4GHz Band: 2412 MHz ~ 2462 MHz Frequency Range WLAN 5.2GHz Band: 5180 MHz ~ 5240 MHz WLAN 5.8GHz Band: 5745 MHz ~ 5825 MHz Bluetooth: 2402 MHz ~ 2480 MHz Mode 802.11a/b/g/n/ac HT20/HT40/VHT20/VHT40/VHT80 Bluetooth LE EUT Stage Production Unit Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. < Antenna Gain for Non-Beamforming Mode> Peak antenna gain(dBi) Bluetooth LE 2.4GHz WLAN 5GHz WLAN MIMO MIMO SISO SISO MIMO SISO MIMO SISO MIMO MIMO Mode Mode Ant 2 Mode Mode Mode Mode Mode Mode Mode Mode Ant Ant Ant 1 Ant 2 Ant 1+2 Ant 1 Ant 2 Ant 3 Ant 4 Ant 1+2 1+2+3 1+2+3+4 0.4 1.8 0.4 1 3.6 4.4 3.1 3.8 1.1 2.7 2 < Antenna Gain for Beamforming Mode> Peak antenna gain(dBi) 2.4GHz WLAN 5GHz WLAN MIMO Mode MIMO Mode MIMO Mode MIMO Mode Ant 1+2 Ant 1+2 Ant 1+2+3 Ant 1+2+3+4 0.12 0.29 0.82 1.18 Reviewed by: Jason Wang Report Producer: Wan Liu TEL : 886-3-327-3456 Page : 4 of 7 FAX : 886-3-328-4978 Issued Date : Apr. 23, 2019 Form version: 180516

RF EXPOSURE EVALUATION REPORT Report No. : FA912813A 2. Maximum RF average output power among production units <Non-Beamforming Mode> Maximum Average Power (dBm) Bluetooth LE 2.4GHz WLAN 5GHz WLAN SISO Mode MIMO Mode SISO Mode MIMO Mode MIMO Mode MIMO Mode Ant 2 Ant 1 Ant 1+2 Ant 1 Ant 1+2 Ant 1+2+3 Ant 1+2+3+4 -2 22.5 25.5 22.5 26 27.5 28.5 <Beamforming Mode> Maximum Average Power (dBm) 2.4GHz WLAN 5GHz WLAN MIMO Mode MIMO Mode MIMO Mode MIMO Mode Ant 1+2 Ant 1+2 Ant 1+2+3 Ant 1+2+3+4 25 26.5 28 26.5 TEL : 886-3-327-3456 Page : 5 of 7 FAX : 886-3-328-4978 Issued Date : Apr. 23, 2019 Form version: 180516

RF EXPOSURE EVALUATION REPORT Report No. : FA912813A 3. RF Exposure Limit Introduction According to ANSI/IEEE C95.1-1992, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. The MPE was calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: 𝐏𝐆 𝐒= 𝟒𝛑𝐑𝟐 Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna TEL : 886-3-327-3456 Page : 6 of 7 FAX : 886-3-328-4978 Issued Date : Apr. 23, 2019 Form version: 180516

seorton cas. _RF EXPOSURE EVALUATION REPORT Report No. : FAQ12813A 4. Radio Frequency Radiation Exposure Evaluation 4.1. Standalone Power Density Calculation <Non—Beamforming Mode> Blustooth LE 2402.0 0.40 —2.00 —1.600 0.001 0.692 0.000 2.4GHz WLAN SISO Mode ANT1 2412.0 1.80 22.50 24.300 0.269 269.153 0.054 2.4GHz WLAN MIMO Mode ANT1+2 2412.0 1.00 25.50 26.500 0.447 446.684 0.089 5GHz WLAN SISO Mode ANT1 5180.0 3.60 22.50 26.100 0.407 407.380 0.081 5GHz WLAN MIMO Mode ANT1+2 5180.0 110 26.00 27.100 0.513 512.861 0.102 5GHz WLAN MIMO Mode ANT1+2+3 5180.0 2.70 27.50 30.200 1.047 [1047.129] 0.208 5GHz WLAN MIMO Mode ANT1+2+3+4| 5180.0 2.00 28.50 30.500 1122 |1122.018] 0.223 Note: 1. In the above table have assessed Bluetooth, WLAN2.4GHz and WLAN 5GHz by referring to their maximum power. <Beamforming Mode> ho Antenna Maximum Maximum |Maximum Average Power F'f&‘;‘ez’;cy ol crmeraairct mss ie t Dez”;ci% w (mv'\',i/’;:AZ) en oc tae e 2.4GHz WLAN MIMO Mode ANT1+2 2412.0 012 25.00 25420 o.325 325087 o.0es 1.000 |0.064707 5GHz WLAN MIMO Mode ANTi+2 5180.0 o.29 26.50 26.790 0.478 477529 o.095 1.000 |0.095050 BGHz WLAN MIMO Mode ANT1—2—3 5180.0 0.82 28.00 28.820 o762 762079 O.152 1.000 |0.i5i6ss BGHz WLAN MIMO Mode ANTi—2—3—4| 5180.0 1.i8 26.50 27.680 O.586 Se6.is8 O.117 1.000 |0.i16668 Note: 1. In the above table have assessed WLANZ.4GHz and WLAN 5GHz by referring to their maximum power. 4.2. Collocated Power Density Calculation Maximum Bluetooth ol Maximum 24GHz anle WLAN WE Maximum 5GHz Apohl wian w * (Power Density in / Limit) Eomm tdikit Power Density / Limit Power Density / Limit WLAN+Bluetooth 0.000138 0.088910 0.223332 0.312380 Note: 1. X(Power Density / Limit): This is a summation of [(power density for each transmitter/antenna included in the simultaneous transmission)/ (corresponding MPE limit)], for all radio transmitter. 2. Considering all antenna collocation of the EIRP performance listed in the table above, the aggregated (power density /limit) is smaller than 1, and MPE of all collocated transmitters is compliant. Conclusion: According to 47 CFR §2.1091, the RF exposure analysis concludes that the RF Exposure is FCC compliant. TEL : 886—3—327—3456 Page : 7 of 7 FAX : 886—3—328—4978 Issued Date : Apr. 23, 2019 Form version: 180516


Document Created: 2019-05-09 22:38:46
Document Modified: 2019-05-09 22:38:46
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC