Test Report_20161114_v2 - 2AG7G-A1A_TestRpt_NII_5G B1 20161114.pdf

FCC ID: 2AG7G-A1A

Test Report

Download: PDF
FCCID_3199137

FCC RF Test Report Report No. : FR6O0801-01D FCC RF Test Report APPLICANT : Plume Design Inc EQUIPMENT : Plume Pod BRAND NAME : Plume Design Inc MODEL NAME : A1A MARKETING NAME : Plume Adaptive WiFi FCC ID : 2AG7G-A1A STANDARD : FCC Part 15 Subpart E §15.407 CLASSIFICATION : (NII) Unlicensed National Information Infrastructure The product was received on Sep. 19, 2016 and testing was completed on Nov. 12, 2016. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Joseph Lin / Supervisor Approved by: Jones Tsai / Manager SPORTON INTERNATIONAL INC. st No. 52, Hwa Ya 1 Rd., Hwa Ya Technology Park, Kwei-Shan District, Tao Yuan City, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 1 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D TABLE OF CONTENTS REVISION HISTORY.......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ...................................................................................................................................... 5 1.3 Product Feature of Equipment Under Test ........................................................................................ 5 1.4 Product Specification of Equipment Under Test ................................................................................ 6 1.5 Modification of EUT ........................................................................................................................... 6 1.6 Testing Location ................................................................................................................................ 7 1.7 Applicable Standards ......................................................................................................................... 7 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 8 2.1 Carrier Frequency and Channel ........................................................................................................ 8 2.2 Test Mode .......................................................................................................................................... 8 2.3 Connection Diagram of Test System ................................................................................................. 9 2.4 Support Unit used in test configuration and system ........................................................................ 10 2.5 EUT Operation Test Setup .............................................................................................................. 10 2.6 Measurement Results Explanation Example ................................................................................... 11 3 TEST RESULT ........................................................................................................................................... 12 3.1 26dB & 99% Occupied Bandwidth Measurement ........................................................................... 12 3.2 Maximum Conducted Output Power Measurement ........................................................................ 14 3.3 Power Spectral Density Measurement ............................................................................................ 15 3.4 Unwanted Emissions Measurement ................................................................................................ 17 3.5 AC Conducted Emission Measurement........................................................................................... 21 3.6 Frequency Stability Measurement ................................................................................................... 27 3.7 Automatically Discontinue Transmission ......................................................................................... 28 3.8 Antenna Requirements .................................................................................................................... 29 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 30 5 UNCERTAINTY OF EVALUATION ........................................................................................................... 31 APPENDIX A. CONDUCTED TEST RESULTS APPENDIX B. RADIATED SPURIOUS EMISSION APPENDIX C. RADIATED SPURIOUS EMISSION PLOTS APPENDIX D. DUTY CYCLE PLOTS APPENDIX E. SETUP PHOTOGRAPHS SPORTON INTERNATIONAL INC. Page Number : 2 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR6O0801-01D Rev. 01 Initial issue of report Nov. 04, 2016 FR6O0801-01D Rev. 02 Adding RJ-45 Cable mode Nov. 14, 2016 SPORTON INTERNATIONAL INC. Page Number : 3 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D SUMMARY OF TEST RESULT Report FCC Rule Description Limit Result Remark Section 2.1049 3.1 26dB & 99% Bandwidth - Pass - 15.403(i) Maximum Conducted ≤ 30 dBm 3.2 15.407(a) Pass - Output Power (depend on band) ≤ 17 dBm 3.3 15.407(a) Power Spectral Density Pass - (depend on band) ≤ -17, -27 dBm Under limit 3.4 15.407(b) Unwanted Emissions (depend on Pass 1.03 dB at band)&15.209(a) 10440.000 MHz Under limit 3.5 15.207 AC Conducted Emission 15.207(a) Pass 0.60 dB at 0.534 MHz Within Operation 3.6 15.407(g) Frequency Stability Pass - Band Automatically Discontinue Discontinue 3.7 15.407(c) Pass - Transmission Transmission 15.203 & 3.8 Antenna Requirement N/A Pass - 15.407(a) SPORTON INTERNATIONAL INC. Page Number : 4 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 1 General Description 1.1 Applicant Plume Design Inc 200 California Ave, STE200, Palo Alto, CA 94306, USA 1.2 Manufacturer Plume Design Inc 200 California Ave, STE200, Palo Alto, CA 94306, USA 1.3 Product Feature of Equipment Under Test Product Feature Equipment Plume Pod Brand Name Plume Design Inc Model Name A1A Marketing Name Plume Adaptive WiFi FCC ID 2AG7G-A1A WLAN 11a/b/g/n HT20/HT40 EUT supports Radios application WLAN 11ac VHT80 Bluetooth BR/EDR/LE HW Version DVT EUT Stage Production Unit Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. SPORTON INTERNATIONAL INC. Page Number : 5 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 1.4 Product Specification of Equipment Under Test Standards-related Product Specification Tx/Rx Frequency Range 5180 MHz ~ 5240 MHz MIMO <Ant. 1 + 2> 802.11a : 22.28 dBm / 0.1690 W Maximum Output Power to 802.11n HT20 : 22.73 dBm / 0.1875 W Antenna 802.11n HT40 : 22.71 dBm / 0.1866 W 802.11ac VHT80: 14.52 dBm / 0.0283 W 802.11a : 26.00 MHz 802.11n HT20 : 25.70 MHz 99% Occupied Bandwidth 802.11n HT40 : 58.50 MHz 802.11ac VHT80 : 75.96 MHz <Ant. 1> : Dipole Antenna with gain 3.20 dBi Antenna Type / Gain <Ant. 2> : Dipole Antenna with gain 3.10 dBi 802.11a/n : OFDM (BPSK / QPSK / 16QAM / 64QAM) Type of Modulation 802.11ac : OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM) Ant. 1 Ant. 2 Antenna Function Description 802.11 a/n/ac V V MIMO Note: MIMO Ant. 1+2 is a calculated result from sum of the power MIMO Ant. 1 and MIMO Ant. 2. 1.5 Modification of EUT No modifications are made to the EUT during all test items. SPORTON INTERNATIONAL INC. Page Number : 6 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 1.6 Testing Location Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code : 1190) and the FCC designation No. TW1022 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC Test. Test Site SPORTON INTERNATIONAL INC. st No. 52, Hwa Ya 1 Rd., Hwa Ya Technology Park, Kwei-Shan District, Tao Yuan City, Taiwan, R.O.C. Test Site Location TEL: +886-3-327-3456 FAX: +886-3-328-4978 Sporton Site No. Test Site No. TH05-HY CO05-HY Note: The test site complies with ANSI C63.4 2014 requirement. Test Site SPORTON INTERNATIONAL INC. No.58, Aly. 75, Ln. 564, Wenhua 3rd Rd. Guishan Dist, Taoyuan City, Taiwan (R.O.C.) Test Site Location TEL: +886-3-327-0868 FAX: +886-3-327-0855 Sporton Site No. Test Site No. 03CH12-HY Note: The test site complies with ANSI C63.4 2014 requirement. 1.7 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  FCC Part 15 Subpart E  FCC KDB 789033 D02 General UNII Test Procedures New Rules v01r03  FCC KDB 662911 D01 Multiple Transmitter Output v02r01.  FCC KDB 644545 D03 Guidance for IEEE 802 11ac New Rules v01  ANSI C63.10-2013 Remark: 1. All test items were verified and recorded according to the standards and without any deviation during the test. 2. This EUT has also been tested and complied with the requirements of FCC Part 15, Subpart B, recorded in a separate test report. SPORTON INTERNATIONAL INC. Page Number : 7 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

seonton cas. FCC RF Test Report Report No. : FR6O0801—01D 2 Test Configuration of Equipment Under Test The EUT has been associated with peripherals and configuration operated in a manner tended to maximize its emission characteristics in a typical application. Frequency range investigated: conducted emission (150 kHz to 30 MHz) and radiated emission (9 kHz to the 10th harmonic of the highest fundamental frequency or to 40 GHz, whichever is lower). For radiated measurement, pre—scanned in three orthogonal panels, X, Y, Z. The worst cases (Z plane) were recorded in this report. 2.1 Carrier Frequency and Channel Freq. Freq. Frequency Band Channel (MHz) h Channe I (MHz) 36 5180 44 5220 5150—5250 MHz 38° 5190 16 5230 Band 1 (U—NI~1) 40 5200 48 5240 42" 5210 Note: 1. The above Frequency and Channel in were 802.11n HT4Q. 2. The above Frequency and Channel in """ were 802.11ac VHT8O. 2.2 Test Mode Final test mode of conducted test items and radiated spurious emissions are considering the modulation and worse data rates as below table. MIMO Antenna Modulation Data Rate 802. 11a 6 Mbps 802.11n HT20 MCSS 802.11n HT40 MCSS 802.11ac VHT8O MCSO Test Cases AC Conducted Emission Mode 1 : LAN Link + WLAN (5GHz) Link + Bluetooth Link Band I : 5150—5250 MHz Ch. # 802.11a 802.11n HT20 802.11n HT40 802.11ac VHT8O L Low 36 36 38 — Middle 44 44 — 42 H High 48 48 46 — SPORTON INTERNATIONAL INC. Page Number : 8 of 31 TEL : 886—3—327—3456 Report Issued Date : Nov. 14, 2016 FAX : 886—3—328—4978 Report Version : Rev. 02 FCC ID : 2AG7G—A1A Report Template No.: BUS—FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 2.3 Connection Diagram of Test System <WLAN Tx Mode> <WLAN RJ-45 Cable Mode> SPORTON INTERNATIONAL INC. Page Number : 9 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D <AC Conducted Emission Mode> 2.4 Support Unit used in test configuration and system Item Equipment Trade Name Model Name FCC ID Data Cable Power Cord AC I/P: FCC DoC/ Unshielded, 1.2 m 1. Notebook DELL P20G Contains FCC ID: N/A DC O/P: QDS-BRCM1051 Shielded, 1.8 m AC I/P: FCC DoC/ Latitude Unshielded, 1.2 m 2. Notebook DELL Contains FCC ID: N/A E6320 DC O/P: QDS-BRCM1054 Shielded, 1.8 m 3. iPod Apple A1285 FCC DoC Shielded, 1.0 m N/A 4. LCD Monitor DELL U2410 FCC DoC Shielded, 1.6 m Unshielded, 1.8 m Unshielded, 5. RJ-45 Cable INVAX DATA CABLE IVX011 N/A N/A 1.0m 2.5 EUT Operation Test Setup For WLAN function, programmed RF utility, “Putty” installed in the notebook make the EUT provide functions like channel selection and power level for continuous transmitting and receiving signals. SPORTON INTERNATIONAL INC. Page Number : 10 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 2.6 Measurement Results Explanation Example For all conducted test items: The offset level is set in the spectrum analyzer to compensate the RF cable loss and attenuator factor between EUT conducted output port and spectrum analyzer. With the offset compensation, the spectrum analyzer reading level is exactly the EUT RF output level. Example : The spectrum analyzer offset is derived from RF cable loss and attenuator factor. Offset = RF cable loss + attenuator factor. Following shows an offset computation example with cable loss 4.2 dB and 10dB attenuator. Offset(dB) = RF cable loss(dB) + attenuator factor(dB). = 4.2 + 10 = 14.2 (dB) SPORTON INTERNATIONAL INC. Page Number : 11 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 3 Test Result 3.1 26dB & 99% Occupied Bandwidth Measurement 3.1.1 Description of 26dB & 99% Occupied Bandwidth This section is for reporting purpose only. There is no restriction limits for bandwidth. 3.1.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.1.3 Test Procedures 1. The testing follows FCC KDB 789033 D02 General UNII Test Procedures New Rules v01r03. Section C) Emission bandwidth 2. Set RBW = approximately 1% of the emission bandwidth. 3. Set the VBW > RBW. 4. Detector = Peak. 5. Trace mode = max hold 6. Measure the maximum width of the emission that is 26 dB down from the peak of the emission. Compare this with the RBW setting of the analyzer. Readjust RBW and repeat measurement as needed until the RBW/EBW ratio is approximately 1%. 7. For 99% Bandwidth Measurement, the spectrum analyzer's resolution bandwidth (RBW) is set 1MHz and set the Video bandwidth (VBW) ≥ 3 * RBW. 8. Measure and record the results in the test report. 3.1.4 Test Setup SPORTON INTERNATIONAL INC. Page Number : 12 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 3.1.5 Test Result of 26dB & 99% Occupied Bandwidth Please refer to Appendix A. Maximum 26dB Bandwidth * RBW 1 MHz Delta 2 [T1 ] * VBW 3 MHz -1.45 dB Ref 30 dBm * Att 20 dB SWT 20 ms 100.190000000 MHz 30 Offset 25.4 dB Marker 1 [T1 ] -11.47 dBm 5.179890000 GHz A 20 1 PK D1 12.68 dBm VIEW 10 LVL 0 1 -10 2 D2 -13.32 dBm -20 3DB -30 -40 -50 -60 -70 Center 5.23 GHz 16 MHz/ Span 160 MHz Date: 8.OCT.2016 13:26:59 Maximum 99% Occupied Bandwidth * RBW 1 MHz Marker 1 [T1 ] * VBW 3 MHz 1.78 dBm Ref 30 dBm * Att 20 dB SWT 20 ms 5.198360000 GHz 30 Offset 25.4 dB OBW 75.960000000 MHz Temp 1 [T1 OBW] -5.44 dBm A 20 5.171840000 GHz 1 SA * Temp 2 [T1 OBW] MAXH 10 -4.43 dBm LVL 1 5.247800000 GHz 0 T1 T2 -10 -20 3DB -30 -40 -50 -60 -70 Center 5.21 GHz 12 MHz/ Span 120 MHz Date: 8.OCT.2016 13:31:13 Note: The occupied channel bandwidth is maintained within the band of operation for all of the modulations. SPORTON INTERNATIONAL INC. Page Number : 13 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 3.2 Maximum Conducted Output Power Measurement 3.2.1 Limit of Maximum Conducted Output Power For mobile and portable client devices in the 5.15–5.25 GHz band, the maximum conducted output power over the frequency band of operation shall not exceed 250 mW. If transmitting antennas of directional gain greater than 6 dBi are used, the peak output power shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dBi. Note that U-NII-2 band, devices with a maximum e.i.r.p. greater than 500 mW shall implement TPC in order to have the capability to operate at least 6 dB below the maximum permitted e.i.r.p. of 1 W. 3.2.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.2.3 Test Procedures The testing follows Method PM of FCC KDB 789033 D02 General UNII Test Procedures New Rules v01r03 for STBC modes. Method PM (Measurement using an RF average power meter): 1. Measurement is performed using a wideband RF power meter. 2. The EUT is configured to transmit continuously with a consistent duty cycle at its maximum power control level. 3. Measure the average power of the transmitter, and the average power is corrected with duty factor, 10 log(1/x), where x is the duty cycle. 3.2.4 Test Setup 3.2.5 Test Result of Maximum Conducted Output Power Please refer to Appendix A. SPORTON INTERNATIONAL INC. Page Number : 14 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

seomovc«s. FCC RF Test Report Report No. : FR6O0801—01D 3.3 Power Spectral Density Measurement 3.3.1 Limit of Power Spectral Density For mobile and portable client devices in the 5.15—5.25 GHz band, the maximum power spectral density shall not exceed 11dBm in any 1 megahertz band. If transmitting antennas of directional gain greater than 6 dBi are used, the peak output power shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dBi. 3.3.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.3.3 Test Procedures The testing follows FCC KDB 789033 D02 General UNII Test Procedures New Rules v01r03. Section F) Maximum power spectral density. # Method SA—2 # (trace averaging across on and off times of the EUT transmissions, followed by duty cycle correction). 1. The testing follows Method SA—2 of FCC KDB 789033 DO2 General UNIl Test Procedures New Rules v01r03. +_ Measure the duty cycle. «_ Set span to encompass the entire emission bandwidth (EBW) of the signal. * Set RBW = 1 MHz. + Set VBW 2 3 MHz. + Number of points in sweep 2 2 Span / RBW. +—_ Sweep time= auto. +—_ Detector= RMS +—_ Trace average at least 100 traces in power averaging mode. +—_ Add 10 log(1/x), where x is the duty cycle, to the measured power in order to compute the average power during the actual transmission times. For example, add 10 log(1/0.25) = 6 dB if the duty cycle is 25 percent. SPORTON INTERNATIONAL INC. Page Number : 15 of 31 TEL : 886—3—327—3456 Report Issued Date : Nov. 14, 2016 FAX : 886—3—328—4978 Report Version : Rev. 02 FCC ID : 2AG7G—A1A Report Template No.: BUS—FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 2. The RF output of EUT was connected to the spectrum analyzer by a low loss cable. 3. Each plot has already offset with cable loss, and attenuator loss. Measure the PPSD and record it. 4. For MIMO mode, calculation method follows FCC KDB 662911 D01 Multiple Transmitter Output v02r01. Method (a): Measure and sum the spectra across the outputs. The total final Power Spectral Density is from a device with 2 transmitter outputs. The spectrum measurements of the individual outputs are all performed with the same span and number of points, the spectrum value in the first spectral bin of output 1 is summed with that in the first spectral bin of output 2 to obtain the value for the first frequency bin of the summed spectrum. 3.3.4 Test Setup 3.3.5 Test Result of Power Spectral Density Please refer to Appendix A. Worst Case Power Density (dBm/MHz) for <MIMO Ant. 1+2> Note: Average Power Density (dB) = Measured value+ Duty Factor SPORTON INTERNATIONAL INC. Page Number : 16 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 3.4 Unwanted Emissions Measurement This section as specified in FCC Part 15.407(b) is to measure unwanted emissions through radiated measurement for band edge spurious emissions and out of band emissions measurement. The unwanted emissions shall comply with 15.407(b)(1) to (6), and restricted bands per FCC Part15.205. 3.4.1 Limit of Unwanted Emissions (1) For transmitters operating in the 5150-5250 MHz band: all emissions outside of the 5150-5350 MHz band shall not exceed an EIRP of –27dBm/MHz. (2) Unwanted spurious emissions fallen in restricted bands per FCC Part15.205 shall comply with the general field strength limits set forth in § 15.209 as below table, Frequency Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 – 0.490 2400/F(kHz) 300 0.490 – 1.705 24000/F(kHz) 30 1.705 – 30.0 30 30 30 – 88 100 3 88 – 216 150 3 216 - 960 200 3 Above 960 500 3 Note: The following formula is used to convert the EIRP to field strength. EIRP (dBm) Field Strength at 3m (dBμV/m) -17 78.3 - 27 68.3 (3) KDB789033 D02 v01r03 G)2)c) As specified in 15.407(b), emissions above 1000 MHz that are outside of the restricted bands are subject to a peak emission limit of -27 dBm/MHz (or -17 dBm/MHz as specified in 15.407(b)(4)). However, an out-of-band emission that complies with both the average and peak limits of 15.209 is not required to satisfy the -27 dBm/MHz or -17 dBm/MHz peak emission limit. 3.4.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. SPORTON INTERNATIONAL INC. Page Number : 17 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

seonton cas. FCC RF Test Report Report No. : FR6O0801—01D 3.4.3 Test Procedures 1. The testing follows FCC KDB 789033 D02 General UNII Test Procedures New Rules v01r03. Section G) Unwanted emissions measurement. (1) Procedure for Unwanted Emissions Measurements Below 1000MHz +—_ RBW =120 kHz +0 VBW = 300 kHz + Detector = Peak +—_ Trace mode = max hold (2) Procedure for Peak Unwanted Emissions Measurements Above 1000 MHz + RBW =1 MHz +—_ VBW > 3 MHz + Detector = Peak +—_ Sweep time = auto +—_ Trace mode = max hold (3) Procedures for Average Unwanted Emissions Measurements Above 1000MHz + RBW =1 MHz +—_ VBW =10 Hz, when duty cycle is no less than 98 percent. +— VBW 2 1/T, when duty cycle is less than 98 percent where T is the minimum transmission duration over which the transmitter is on and is transmitting at its maximum power control level for the tested mode of operation. 2. The EUT was placed on a turntable with 0.8 meter for frequency below 1GHz and 1.5 meter for frequency above 1GHz respectively above ground. 3. The EUT was set 3 meters from the interference receiving antenna which was mounted on the top of a variable height antenna tower. 4. The antenna is a broadband antenna and its height is adjusted between one meter and four meters above ground to find the maximum value of the field strength for both horizontal polarization and vertical polarization of the antenna. 5. For each suspected emission, the EUT was arranged to its worst case and then adjust the antenna tower (from 1 m to 4 m) and turntable (from 0 degree to 360 degrees) to find the maximum reading. 6. For testing below 1GHz, if the emission level of the EUT in peak mode was 3 dB lower than the limit specified, then peak values of EUT will be reported, otherwise, the emissions will be repeated one by one using the CISPR quasi—peak method and reported. 7. For testing above 1GHz, the emission level of the EUT in peak mode was 20dB lower than average limit (that means the emission level in average mode also complies with the limit in average mode), then peak values of EUT will be reported, otherwise, the emissions will be measured in average mode again and reported. SPORTON INTERNATIONAL INC. Page Number : 18 of 31 TEL : 886—3—327—3456 Report Issued Date : Nov. 14, 2016 FAX : 886—3—328—4978 Report Version : Rev. 02 FCC ID : 2AG7G—A1A Report Template No.: BUS—FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 3.4.4 Test Setup For radiated emissions below 30MHz For radiated emissions from 30MHz to 1GHz SPORTON INTERNATIONAL INC. Page Number : 19 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D For radiated emissions above 1GHz 3.4.5 Test Results of Radiated Spurious Emissions (9 kHz ~ 30 MHz) The low frequency, which started from 9 kHz to 30MHz, was pre-scanned and the result which was 20dB lower than the limit line per 15.31(o) was not reported. 3.4.6 Test Result of Radiated Spurious at Band Edges Please refer to Appendix B and C. 3.4.7 Duty Cycle Please refer to Appendix D. 3.4.8 Test Result of Radiated Spurious Emissions (30MHz ~ 10th Harmonic) Please refer to Appendix B and C. SPORTON INTERNATIONAL INC. Page Number : 20 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 3.5 AC Conducted Emission Measurement 3.5.1 Limit of AC Conducted Emission For equipment that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the following table. Conducted limit (dBμV) Frequency of emission (MHz) Quasi-peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 *Decreases with the logarithm of the frequency. 3.5.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.5.3 Test Procedures 1. The EUT was placed 0.4 meter from the conducting wall of the shielding room was kept at least 80 centimeters from any other grounded conducting surface. 2. Connect EUT to the power mains through a line impedance stabilization network (LISN). 3. All the support units are connecting to the other LISN. 4. The LISN provides 50 ohm coupling impedance for the measuring instrument. 5. The FCC states that a 50 ohm, 50 microhenry LISN should be used. 6. Both sides of AC line were checked for maximum conducted interference. 7. The frequency range from 150 kHz to 30 MHz was searched. 8. Set the test-receiver system to Peak Detect Function and specified bandwidth with Maximum Hold Mode. SPORTON INTERNATIONAL INC. Page Number : 21 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 3.5.4 Test Setup SPORTON INTERNATIONAL INC. Page Number : 22 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

seomovc«s. FCC RF Test Report Report No. : FR6O0801—01D 3.5.5 Test Result of AC Conducted Emission Test Mode : Mode 1 Temperature : 21~23C |Test Engineer : |Arthur Hsich Relative Humidity : |50~52% Test Voltage : |120Vac / 60Hz Phase : Line Function Type : |LAN Link + WLAN (5GHz) Link + Bluetooth Link 100 £ CISPR22—OP Limit at Main Ports 2 $ & +s w ® qistBara atMainPorts 7 % x 5 hie rap lrnipen +% ’»” 4 ‘~’ * o0ta4 so % %% *+ * .0“. 4 20 10f 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Final Result : QuasiPeak Frequenc QuasiPeak . . Cort. Margin Limit ing __|__aeaw_4_/ 46e i ag aBin 0.310000 40.2 Off L1 19.6 19.8 60.0 0.382000 42.7 Off L1 19.6 15.5 58.2 0.446000 40.2 Off L1 19.6 16.7 56.9 0.486000 51.1 Off L1 19.6 5.1 56.2 0.534000 54.7 Off L1 19.6 1.3 56.0 0.582000 43.6 Off L1 19.6 12.4 56.0 0.758000 41.5 Off L1 19.6 14.5 56.0 0.934000 38.8 Off L1 19.7 17.2 56.0 1.078000 42.4 Off L1 19.7 13.6 56.0 1.174000 41.0 Off L1 19.7 15.0 56.0 1.318000 40.2 Off L1 19.7 15.8 56.0 1.702000 42.5 Off L1 19.7 13.5 56.0 2.630000 44.7 Off L1 19.3 11.3 56.0 3.038000 45.7 Off L1 19.6 10.3 56.0 3.534000 46.1 Off L1 19.7 9.9 56.0 3.702000 44.8 Off L1 19.8 11.2 56.0 4.086000 45.0 Off L1 19.8 11.0 56.0 4.566000 41.3 Off L1 19.9 14.7 56.0 SPORTON INTERNATIONAL INC. Page Number : 23 of 31 TEL : 886—3—327—3456 Report Issued Date : Nov. 14, 2016 FAX : 886—3—328—4978 Report Version : Rev. 02 FCC ID : 2AG7G—A1A Report Template No.: BUS—FR15EWL AC MA Version 1.4

seomovc«s. FCC RF Test Report Report No. : FR6O0801—01D Test Mode : Mode 1 Temperature : 21~23C Test Engineer : |Arthur Hsich Relative Humidity : |50~52% Test Voltage : |120Vac / 60Hz Phase : Line Function Type : |LAN Link + WLAN (5GHz) Link + Bluetooth Link 100 so 80 70 # CISPR22—OP Limit at Main Ports 3 $ sfi CI Ave, Limit Main Ports cz ‘% Al—ald alied. t mit "“ j x + *w*, +‘ *94 * * 4 35 * * % &. 4 .0“’ 4 20 10f 0 + + Pobb44 + + fobobopo + i 150k 300 400 500 800 1M 2M 3M 4M 5M 608 10M 20M 30M Frequency in Hz Final Result : Average Frequency Average Filter Line Cort. Margin Limit (MHz) (dBuV) (dB) (dB) (dBpV) 0.310000 20.6 off L1 19g6 20.4 50.0 0.382000 31.3 off L1 19g6 16.9 48.2 0.446000 20.5 off L1 196 174 46.9 0.486000 40.8 off L1 196 5.4 46.2 0.534000 45.4 off L1 196 0.6 46.0 0.582000 34.8 off L1 196 11.2 46.0 0.758000 31.0 off L1 196 15.0 46.0 0.934000 26.5 off L1 197 185 46.0 1.078000 20.5 off L1 197 165 46.0 1.174000 31.1 off L1 197 14.9 46.0 1.318000 28.5 off L1 197 175 46.0 1.702000 32.0 off L1 197 14.0 46.0 2.630000 32.5 off L1 183 125 46.0 3.038000 32.5 off L1 196 125 46.0 3.534000 33.3 off L1 197 127 46.0 3.702000 31.8 off L1 198 14.2 46.0 4.086000 32.6 off L1 188 134 46.0 4.566000 30.4 Off L1 19.9 15.6 46.0 SPORTON INTERNATIONAL INC. Page Number : 24 of 31 TEL : 886—3—327—3456 Report Issued Date : Nov. 14, 2016 FAX : 886—3—328—4978 Report Version : Rev. 02 FCC ID : 2AG7G—A1A Report Template No.: BUS—FR15EWL AC MA Version 1.4

seomovc«s. FCC RF Test Report Report No. : FR6O0801—01D Test Mode : Mode 1 Temperature : 21~23C Test Engineer : |Arthur Hsich Relative Humidity : |50~52% Test Voltage : |120Vac / 60Hz Phase : Neutral Function Type : |LAN Link + WLAN (5GHz) Link + Bluetooth Link 100 so 80 70 so CISPR22—0P Limit at Main Rorts E A g 5o ‘=. ain Forts ¥ 8 ao 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8. 10M 20M 30M Frequency in Hz Final Result : QuasiPeak Frequency QuasiPeak Filter Line Cort. Margin Limit (MHz) (dBuV) (dB) _(dB) (dBpV) 0.486000 47.7 off N 19.6 8.5 56.2 0.534000 54.6 off N 19.6 14 56.0 0.774000 40.8 off N 19.6 15.2 56.0 1.078000 41.3 off N 19.6 14.7 56.0 1.614000 42.0 off N 19.7 14.0 56.0 1.742000 40.6 off N 19.7 15.4 56.0 2.158000 41.2 off N 17.9 14.8 56.0 2.662000 44.9 off N 19.4 1111 56.0 3.062000 47.3 off N 19.6 8.7 56.0 3.582000 48.4 off N 19.7 7.6 56.0 3.622000 46.0 off N 19.7 10.0 56.0 3.902000 44.5 off N 19.3 11.5 56.0 4.550000 41.7 off N 19.3 14.3 56.0 5.190000 37.4 off N_ 19.9 226 60.0 SPORTON INTERNATIONAL INC. Page Number : 25 of 31 TEL : 886—3—327—3456 Report Issued Date : Nov. 14, 2016 FAX : 886—3—328—4978 Report Version : Rev. 02 FCC ID : 2AG7G—A1A Report Template No.: BUS—FR15EWL AC MA Version 1.4

seomovc«s. FCC RF Test Report Report No. : FR6O0801—01D Test Mode : Mode 1 Temperature : 21~23C Test Engineer : |Arthur Hsich Relative Humidity : |50~52% Test Voltage : |120Vac / 60Hz Phase : Neutral Function Type : LAN Link + WLAN (5GHz) Link + Bluetooth Link 100. co CISPR22—GP Limit at Main Rorts €g 5o ‘=. ain Forts i a 30 20 i0 0 150k 200. 400500 800 1M am aMo 4M SM 600 8 iOM 20M 30M Frequency in Hz Final Result : Average Frequency Average Filter Line Cort. Margin Limit (MHz) (dBuV) (dB) (dB) (dBpV) 0.486000 31.7 Off N 19.6 14.5 46.2 0.534000 39.4 Off N 19.6 6.6 46.0 0.774000 26.0 Off N 19.6 20.0 46.0 1.078000 25.2 Off N 19.6 20.8 46.0 1.614000 26.3 Off N 19.7 19.7 46.0 1.742000 25.3 Off N 19.7 20.7 46.0 2.158000 25.1 Off N 17.9 20.9 46.0 2.662000 28.6 Off N 19.4 17.4 46.0 3.062000 30.4 Off N 19.6 15.6 46.0 3.582000 31.4 Off N 19.7 14.6 46.0 3.622000 29.6 Off N 19.7 16.4 46.0 3.902000 290.3 Off N 19.8 16.7 46.0 4.550000 27.2 Off N 19.8 18.8 46.0 5.190000 25.5 Off N 19.9 24.5 50.0 SPORTON INTERNATIONAL INC. Page Number : 26 of 31 TEL : 886—3—327—3456 Report Issued Date : Nov. 14, 2016 FAX : 886—3—328—4978 Report Version : Rev. 02 FCC ID : 2AG7G—A1A Report Template No.: BUS—FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 3.6 Frequency Stability Measurement 3.6.1 Limit of Frequency Stability Manufacturers of U-NII devices are responsible for ensuring frequency stability such that an emission is maintained within the band of operation under all conditions of normal operation as specified in the user’s manual. 3.6.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.6.3 Test Procedures 1. To ensure emission at the band edge is maintained within the authorized band, those values shall be measured by radiation emissions at upper and lower frequency points, and finally compensated by frequency deviation as procedures below. 2. The EUT was operated at the maximum output power, and connected to the spectrum analyzer, which is set to maximum hold function and peak detector. The peak value of the power envelope was measured and noted. The upper and lower frequency points were respectively measured relatively 10dB lower than the measured peak value. 3. The frequency deviation was calculated by adding the upper frequency point and the lower frequency point divided by two. Those detailed values of frequency deviation are provided in table below. 3.6.4 Test Setup 3.6.5 Test Result of Frequency Stability Please refer to Appendix A. SPORTON INTERNATIONAL INC. Page Number : 27 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 3.7 Automatically Discontinue Transmission 3.7.1 Limit of Automatically Discontinue Transmission The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude the transmission of control or signaling information or the use of repetitive codes used by certain digital technologies to complete frame or burst intervals. Applicants shall include in their application for equipment authorization to describe how this requirement is met. 3.7.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.7.3 Test Result of Automatically Discontinue Transmission While the EUT is not transmitting any information, the EUT can automatically discontinue transmission and become standby mode for power saving. The EUT can detect the controlling signal of ACK message transmitting from remote device and verify whether it shall resend or discontinue transmission. SPORTON INTERNATIONAL INC. Page Number : 28 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 3.8 Antenna Requirements 3.8.1 Standard Applicable According to FCC 47 CFR Section 15.407(a)(1)(2) ,if transmitting antenna directional gain is greater than 6 dBi, both the peak transmit power and the peak power spectral density shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dBi. 3.8.2 Antenna Anti-Replacement Construction An embedded-in antenna design is used. 3.8.3 Antenna Gain FCC KDB 662911 D01 Multiple Transmitter Output v02r01 For power, the directional gain GANT is set equal to the antenna having the highest gain, i.e., F)2)f)i). For PSD, the directional gain calculation is following F)2)f)ii) of KDB 662911 D01 v02r01. The power and PSD limit should be modified if the directional gain of EUT is over 6 dBi, The directional gain “DG” is calculated as following table. DG DG Power PSD for for Limit Limit Ant 1 Ant 2 Power PSD Reduction Reduction (dBi) (dBi) (dBi) (dBi) (dB) (dB) Band I 3.20 3.10 3.20 6.16 0.00 0.16 Power limit reduction = Composite gain – 6dBi, ( min = 0 ) PSD limit reduction = Composite gain + PSD Array gain – 6dBi, ( min = 0 ) SPORTON INTERNATIONAL INC. Page Number : 29 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

seonton cas. FCC RF Test Report Report No. : FR6O0801—01D 4 List of Measuring Equipment . 20. Calibration Instrument Manufacturer Model No. Serial No. Characteristics Date Test Date Due Date Remark . Oct. 04, 2016 ~ Conducted Power Meter Anritsu ML2495A 1132003 |300MHz~40GHz] Aug. 04, 2016 Aug. 03, 2017 oet. 11. 2016 (Thos—Hy) Power Sensor S Anritsu 8 mazatts 4126017 |soombz~40gHz) aug. 9. o4, 0% 2016 °4 oet*11. 08 2016 " |aug, |9%° gg, ag47] Conducted (THOS—HY) ignal Signa Ronde once & FSVv 30 100895 skHz~30GHz Apr 27, 2016 C * Oct. 04, 2016 ~ ducted Apr. 26, ag47]| Conducte Analyzer Schware Oct. 11, 2016 (THOS—HY) Spectrum Rohde & Oct. 04, 2016 ~ Conducted FSP40 100057 SkHz—40GHz Nov. 28, 2015 Nov. 22, 2016 Analyzer Schware Oct. 11, 2016 (THOS—HY) Temperature Chamber popeq sSu—241 seoosris 30c ~asic aun. NP os, 2016 °C oet411. °018 2016 " jun, °* os, apa7] Conducted (Thos—Hy) AC POWEr Gnaintek APC—A1000W N/A N/A N/A Oct. 18, 2016 N/A Conduction Source (GOO5—HY) EMTelest Ronde once & EsCi7 100724 9kHz~7GHz ducti Aug. 30, 2016 Oct. 18, 2016 |Aug. 29, 2017] Conduction Receiver Schware (GOO5—HY) Rohde & Conduction LISN Envzi6 100080 SkHz~80MHz Dec. 02, 2015 Oct. 18, 2016 |Dec. 01, 2016 Schware (GOO5—HY) LISN Rohde & Schware Envzi6 100081 SkHz~80MHz Dec. O 14, 2015 Oct. O 18. 2016 |Dec. O 13, 2018] COnduction (GOO5—HY) Loop Antenna Ronde 29"°° & HFH2—z2 100315 9 kHz~30 MHz Sep. 02, 2015 |°CP— . 26, 25 2016 ~ Sep. 01, 2017) Radiati (2CRO Schware Nov. 12, 2016 (03CH12—HY) Amplifier SONOMA s10N 187312 9kHz~1GHz Now 20, 2015 |°CP— . 26, 25 2016 ~ Nov. 19, 2018| Radiati MRCLO" Nov. 12, 2016 (O3CH12—HY) Spectrum Analyzer Agilent 9 nsosoa |mysessoa7s| sHz—44gkz Mar OO‘ 21, 2016 [CP"5 °08 ~\ug, OO‘ Nov. 12, 2016 29, 2g1 7| Raciation (03CH12—HY) Bilog 9 Antenna TESEQ CBL&11D 37059 30MKz~1GHz bee. 2 28. 2018 °P Nov "5: 12, °08 2018~\pae. |P°C 2g, * ag4g] Ceneny) Radiation EMI Test Ronde & Esuze 100390 20H2~26.5GHz bee. 21, 2015 °5P252016 ~Ing, p9, ag4g] Radiation Receiver Schware Nov. 12, 2016 (03CH12—HY) wl Sep. 26, 2016 ~ Radiation Preampifier MITEQ TrA0204 1872107 2GHz~40GHz Feb. 15, 2016 Feb. 14, 2017 Nov. 12, 2016 (O8CH12—HY) Hom Antenna °°"*A"8E ck geya g120p 9120041328 1gHz 18akz Nov2 o2, 2015 °P°98 oct. o2, ame ~Inoy|N**~ g1, 2g48 Ceneny) Radiation Hom Antenna °°"A828E geua g420p 9120041328 1gkz ~ 18akz Mar. 31, 2016 NO# 112018 * \yg,39, ag4 7| Radiation ck Nov. 12, 2018 Ceneny) Preampifier MITEQ AME—7D—0010 1815698 1GHz~8aHz bee. 14, 2015 |°CP— 25. 26, 2016 ~ Dec. 13, 2016) Radiati "RCRto" 1800—30—40P Nov. 12, 2016 (O8CH12—HY) Preampiifier Keysight 83017A |MY53270148| 1GHz~26.5GHz Jan. 30, 2016 |°CP— . 26, 25 2016 ~ Jan. 29, 2017| Radiati MRCeRO® Nov. 12, 2016 (O8CH12—HY) Antenna Mast° EMEC |AM—BS—4500—B| N/A 1m~4m wa 5895 Nov. 12, 6| 2018 wja Radiation Ceneny) Turn Table EMEC Tr2000 N/A 0~360 Degree Sep. 26, 2016 ~|N/A wpa Radiation Nov. 12, 2016 (O8CH12—HY) GHE—EHF Horn| SCHWARZEE poua gayy |+°0°17098| qeorp. aoaiz Nov. 02, 2018 °_°* *"5 ~|Nov. o1, 2016) N240 Antenna cK 4 Oct. 02, 2016 (O8CH12—HY) SHE—EHF Hom| SCHWARZBE BBHA 9170 BBHA917058 18GHz— 40GHz Apr. 15, 2016 Nov. 11, : 2016 ~ Apr. 14, 2017 Radiation Antenna CK 4 GHz— 40GHz Ap Now 12, 2016 |® (O3CH12—HY) SPORTON INTERNATIONAL INC. Page Number : 30 of 31 TEL : 886—3—327—3456 Report Issued Date : Nov. 14, 2016 FAX : 886—3—328—4978 Report Version : Rev. 02 FCC ID : 2AG7G—A1A Report Template No.: BUS—FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D 5 Uncertainty of Evaluation Uncertainty of Conducted Emission Measurement (150kHz ~ 30MHz) Measuring Uncertainty for a Level of Confidence 2.70 of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (30 MHz ~ 1000 MHz) Measuring Uncertainty for a Level of Confidence 5.10 of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (1000 MHz ~ 18000 MHz) Measuring Uncertainty for a Level of Confidence 5.20 of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (18000 MHz ~ 40000 MHz) Measuring Uncertainty for a Level of Confidence 4.70 of 95% (U = 2Uc(y)) SPORTON INTERNATIONAL INC. Page Number : 31 of 31 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4

FCC RF Test Report Report No. : FR6O0801-01D Appendix A. Conducted Test Results SPORTON INTERNATIONAL INC. Page Number : A1 of A1 TEL : 886-3-327-3456 Report Issued Date : Nov. 14, 2016 FAX : 886-3-328-4978 Report Version : Rev. 02 FCC ID : 2AG7G-A1A Report Template No.: BU5-FR15EWL AC MA Version 1.4


Document Created: 2017-12-17 22:54:51
Document Modified: 2017-12-17 22:54:51
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC