RF Exposure

FCC ID: 2AG32EG7035EM1

RF Exposure Info

Download: PDF
FCCID_3946603

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ180629008-00B FCC§1.1307 (b)(1) & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) Applicable Standard According to subpart 1.1307 (b)(1), 2.1091 systems operating under the provisions of this section shall be operated in a manner that ensures the public is not exposed to RF energy level in excess of the communication guidelines. Result Calculated Formulary: Predication of MPE limit at a given distance PG S= 4R 2 S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW). G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain. R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) For General Population/Uncontrolled Exposure: Antenna Gain Max Tune-up Power Evaluation Power Frequency MPE Limit Distance Density (MHz) (dBi) (numeric) (dBm) (mW) (mW/cm2) (cm) (mW/cm2) 2496-2690 14 25.12 25 316 40 0.4 1.0 Radiation Exposure Statement: To comply with FCC RF exposure requirements, a minimum separation distance of 40cm is required between the antenna and persons, and the available max antenna gain must not exceed 14 dBi. FCC Part 27 Page 8 of 37


Document Created: 2018-08-01 10:00:22
Document Modified: 2018-08-01 10:00:22
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC