Tune up info

FCC ID: 2AG32EG2030CM1

Parts List/Tune Up Info

Download: PDF
FCCID_3597380

Tune Up Procedure of EG2030C-M1 During manufacturing each device is individually calibrated. Measurement is performed in a fully calibrated setup using an CMU 200 base station simulator (system tester), MT8820C and Spectrum analyzer 9k-30GHz FSP. Measurement procedure is outlined below: Measurement Procedure: 1. Set the device to operational voltage and on a predefined channel in a special test mode. 2. The actual output power is measured at several power levels. 3. The gain factors of each individual device are adjusted until the target value is met. The appropriate gain control settings for each output power level are stored in each device individually (for each power level). The user has no possibility to change these settings later on. 4. The maximum gains of each individual device are adjusted and measured until the target value is met. The production target power with tolerance compiles with the maximum power in test report. Maximum Target Power for Production Unit WIFI 2.4 GHz Tune-up Limit (dBm) Mode Low Middle High TX0 13.0 ±1 dBm 13.0±1 dBm 12.5±1 dBm 802.11b TX1 13.5±1 dBm 13.0±1 dBm 13.5±1 dBm TX0 13.5±1 dBm 13.0±1 dBm 12.5±1 dBm 802.11g TX1 13.5±1 dBm 13.5±1 dBm 13.5±1 dBm 802.11n(H20)(MIMO) TX0/ TX1 16.5 ±1 dBm 16.5±1 dBm 16.0±1 dBm 802.11n(H40)(MIMO) TX0/ TX1 16.0 ±1 dBm 16.0 ±1 dBm 16.0 ±1 dBm

Maximum Target Power for Production Unit LTE Band 41 Tune-up Limit (dBm) Band Modulation BW (MHz) RB Size 39675 40620 41565 2498.5MHz 2593.0MHz 2687.5MHz 1 20.5±1 dBm 22.0±1 dBm 22.5±1 dBm QPSK 12 20.5±1 dBm 22.0±1 dBm 22.5±1 dBm LTE 25 20.5±1 dBm 22.0±1 dBm 22.0±1 dBm 5.0 Band 41 1 21.0±1 dBm 22.5±1 dBm 22.5±1 dBm 16QAM 12 20.5±1 dBm 22.0±1 dBm 22.5±1 dBm 25 20.5±1 dBm 22.0±1 dBm 22.5±1 dBm Tune-up Limit (dBm) Band Modulation BW (MHz) RB Size 39700 40620 41540 2501.0MHz 2593.0MHz 2685.0MHz 1 20.5±1 dBm 22.5±1 dBm 22.5±1 dBm QPSK 25 20.5±1 dBm 22.0±1 dBm 22.0±1 dBm LTE 50 20.5±1 dBm 22.0±1 dBm 22.0±1 dBm 10.0 Band 41 1 21.5±1 dBm 22.5±1 dBm 22.5±1 dBm 16QAM 25 20.5±1 dBm 22.0±1 dBm 22.0±1 dBm 50 20.5±1 dBm 22.0±1 dBm 22.0±1 dBm Tune-up Limit (dBm) Band Modulation BW (MHz) RB Size 39725 40620 41515 2503.5MHz 2593.0MHz 2682.5MHz 1 20.5±1 dBm 22.0±1 dBm 21.5±1 dBm QPSK 36 20.5±1 dBm 22.0±1 dBm 22.0±1 dBm LTE 75 20.0±1 dBm 21.5±1 dBm 21.5±1 dBm 15.0 Band 41 1 21.0±1 dBm 22.5±1 dBm 22.5±1 dBm 16QAM 36 20.5±1 dBm 22.0±1 dBm 22.0±1 dBm 75 20.0±1 dBm 21.5±1 dBm 22.0±1 dBm Tune-up Limit (dBm) Band Modulation BW (MHz) RB Size 39750 40620 41490 2506.0MHz 2593.0MHz 2680.0MHz 1 21.5±1 dBm 22.5±1 dBm 23.0±1 dBm QPSK 50 21.0±1 dBm 22.5±1 dBm 22.5±1 dBm LTE 100 21.0±1 dBm 22.5±1 dBm 22.5±1 dBm 20.0 Band 41 1 21.5±1 dBm 23.0±1 dBm 23.0±1 dBm 16QAM 50 21.0±1 dBm 22.5±1 dBm 22.5±1 dBm 100 21.0±1 dBm 22.5±1 dBm 22.5±1 dBm Power unit: dBm Then these appropriate gain settings are stored in each device individually. The user has no possibility to change these settings later on, and during manufacturing each device will be individual calibrated in this range. The measurement is done in a fully calibrated setup, which is based on the base station simulator. Furthermore, the highest power level is verified afterwards in a call measurement on three channels (low, middle and high).


Document Created: 2017-09-26 15:14:14
Document Modified: 2017-09-26 15:14:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC