Test reports

FCC ID: 2AG2K-PEG-001

Test Report

Download: PDF
FCCID_4377145

                                                                                 Report No.: ATE20190983
                                                                                              Page 1 of 28




                             APPLICATION CERTIFICATION
                                     On Behalf of
                                A&H Design Group, Ltd.

                              Wireless remote control vibrator

      Model No.: PEG-001, PEG-002, PEG-003, PEG-004, PEG-005, PEG-006,
           PEG-007, PEG-008, PEG-009, PEG-010, PEG-011, PEG-012

                                  FCC ID: 2AG2K-PEG-001




            Prepared for      :    A&H Design Group, Ltd.
            Address           :    Suite 608, Tower One, Harbour Centre 1 Hok Cheung
                                   Street, Hung Hom, Kowloon, Hong Kong

            Prepared by       :    Shenzhen Accurate Technology Co., Ltd.
            Address           :    1/F., Building A, Changyuan New Material Port, Science
                                   & Industry Park, Nanshan District, Shenzhen, Guangdong,
                                   P.R. China.


                                   Tel: (0755) 26503290
                                   Fax: (0755) 26503396




            Report Number     :    ATE20190983
            Date of Test      :    July 01, 2019-July 06, 2019
            Date of Report    :    July 08, 2019




FCC ID: 2AG2K-PEG-001                                                      Shenzhen Accurate Technology Co., Ltd


                                                                                                                                 Report No.: ATE20190983
                                                                                                                                              Page 2 of 28



                                                          TABLE OF CONTENTS

     Description                                                                                                                                             Page
     Test Report Certification
     1.      GENERAL INFORMATION .......................................................................................................... 4
          1.1.     Description of Device (EUT) .................................................................................................................... 4
          1.2.     Model difference declaration .................................................................................................................... 4
          1.3.     Accessory and Auxiliary Equipment ........................................................................................................ 4
          1.4.     Description of Test Facility ...................................................................................................................... 5
          1.5.     Measurement Uncertainty ......................................................................................................................... 5
     2.      MEASURING DEVICE AND TEST EQUIPMENT ..................................................................... 6
          2.1.     For Radiated Emission Measurement ....................................................................................................... 6
     3.      SUMMARY OF TEST RESULTS................................................................................................... 7
     4.      THE FIELD STRENGTH OF RADIATION EMISSION ............................................................ 8
          4.1.     Block Diagram of Test Setup.................................................................................................................... 8
          4.2.     The Field Strength of Radiation Emission Measurement Limits ............................................................ 10
          4.3.     Configuration of EUT on Measurement ................................................................................................. 10
          4.4.     Operating Condition of EUT .................................................................................................................. 10
          4.5.     Test Procedure ........................................................................................................................................ 11
          4.6.     DATA SAMPLE .................................................................................................................................... 11
          4.7.     The Field Strength of Radiation Emission Measurement Results .......................................................... 12
     5.      -20DB BANDWIDTH ..................................................................................................................... 14
          5.1.     Block Diagram of Test Setup.................................................................................................................. 14
          5.2.     The Bandwidth of Emission Limit According To FCC Part 15 Section 15.231(c) ................................ 14
          5.3.     EUT Configuration on Measurement ..................................................................................................... 14
          5.4.     Operating Condition of EUT .................................................................................................................. 14
          5.5.     Test Procedure ........................................................................................................................................ 15
          5.6.     Measurement Result ............................................................................................................................... 15
     6.      RELEASE TIME MEASUREMENT............................................................................................ 16
          6.1.     Block Diagram of Test Setup.................................................................................................................. 16
          6.2.     Release Time Measurement According To FCC Part 15 Section 15.231(a) .......................................... 16
          6.3.     EUT Configuration on Measurement ..................................................................................................... 16
          6.4.     Operating Condition of EUT .................................................................................................................. 17
          6.5.     Test Procedure ........................................................................................................................................ 17
          6.6.     Measurement Result ............................................................................................................................... 17
     7.      AVERAGE FACTOR MEASUREMENT .................................................................................... 18
          7.1.     Block Diagram of Test Setup.................................................................................................................. 18
          7.2.     Average factor Measurement according to ANSI C63.10-2013 ............................................................. 18
          7.3.     EUT Configuration on Measurement ..................................................................................................... 18
          7.4.     Operating Condition of EUT .................................................................................................................. 19
          7.5.     Test Procedure ........................................................................................................................................ 19
          7.6.     Measurement Result ............................................................................................................................... 19
     8.      ANTENNA REQUIREMENT........................................................................................................ 20
          8.1.     The Requirement .................................................................................................................................... 20
          8.2.     Antenna Construction ............................................................................................................................. 20



FCC ID: 2AG2K-PEG-001                                                                                                    Shenzhen Accurate Technology Co., Ltd


                                                                                   Report No.: ATE20190983
                                                                                                Page 3 of 28




                                     Test Report Certification

             Applicant        :   A&H Design Group, Ltd.
             Address          :   Suite 608, Tower One, Harbour Centre 1 Hok Cheung Street, Hung
                                  Hom, Kowloon, Hong Kong
             Manufacturer     :   TOPARC Technology (Shenzhen) Co., Ltd.
             Address          :   1/2F, 12 Building, Lianchuang Park, Bulan Road, Buji Town,
                                  Longgang District, Shenzhen City, Guangdong Province, P.R. China
                                  518114
             Product          :   Wireless remote control vibrator
                                  PEG-001, PEG-002, PEG-003, PEG-004, PEG-005, PEG-006,
             Model No.        :
                                  PEG-007, PEG-008, PEG-009, PEG-010, PEG-011, PEG-012

             Trade name       :


             Measurement Procedure Used:

             FCC Rules and Regulations Part 15 Subpart C Section 15.231a
             ANSI C63.10-2013

             The device described above is tested by SHENZHEN ACCURATE TECHNOLOGY CO.,
             LTD to determine the maximum emission levels emanating from the device. The maximum
             emission levels are compared to the FCC Part 15 Subpart C Section 15.231a. The
             measurement results are contained in this test report and SHENZHEN ACCURATE
             TECHNOLOGY CO., LTD is assumed full responsibility for the accuracy and completeness
             of these measurements. Also, this report shows that the Equipment Under Test (EUT) is to be
             technically compliant with the FCC requirements.

             This report applies to above tested sample only. This report shall not be reproduced in part
             without written approval of SHENZHEN ACCURATE TECHNOLOGY CO., LTD.

              Date of Test :                                 July 01, 2019-July 06, 2019
              Date of Report:                                       July 08, 2019




              Prepared by :
                                                                ( Tim.zhang, Engineer)




              Approved & Authorized Signer :
                                                                 (Sean Liu, Manager)

FCC ID: 2AG2K-PEG-001                                                        Shenzhen Accurate Technology Co., Ltd


                                                                                    Report No.: ATE20190983
                                                                                                 Page 4 of 28




          1. GENERAL INFORMATION


                 1.1.Description of Device (EUT)

                 EUT                   : Wireless remote control vibrator

                 Model Number          : PEG-001, PEG-002, PEG-003, PEG-004, PEG-005, PEG-006,
                                         PEG-007, PEG-008, PEG-009, PEG-010, PEG-011, PEG-012

                 Power Supply          : DC 3V (powered by battery)

                 Modulation:           : ASK

                 Operation Frequency : 433.92MHz

                 Antenna type          : PCB antenna

                 Antenna gain          : 0dBi

                 Applicant             : A&H Design Group, Ltd.
                 Address               : Suite 608, Tower One, Harbour Centre1 Hok
                                         Cheung Street, Hung Hom ,Kowloon, Hong Kong

                 Manufacturer          : TOPARC Technology(Shenzhen) Co., Ltd.
                 Address               : 1/2F, 12 Building, Lianchuang Park, Bulan Road,
                                         Buji Town, Longgang District, Shenzhen City,
                                         Guangdong Province, P.R. China 518114

                 Date of sample        : July 01, 2019
                 received
                 Date of Test          : July 01, 2019-July 06, 2019



                 1.2.Model difference declaration
                  PEG-001, PEG-002, PEG-003, PEG-004, PEG-005, PEG-006, PEG-007, PEG-008,
                  PEG-009, PEG-010, PEG-011, PEG-012 are identical in interior structure, electrical
                  circuits and components, and just model number is different for the marketing
                  requirement.


                 1.3.Accessory and Auxiliary Equipment
                  N/A

FCC ID: 2AG2K-PEG-001                                                         Shenzhen Accurate Technology Co., Ltd


                                                                                   Report No.: ATE20190983
                                                                                                Page 5 of 28




                 1.4.Description of Test Facility
                   EMC Lab            :   Recognition of accreditation by Federal Communications
                                          Commission (FCC)
                                          The Designation Number is CN1189
                                          The Registration Number is 708358

                                          Listed by Innovation, Science and Economic Development
                                          Canada (ISEDC)
                                          The Registration Number is 5077A-2

                                          Accredited by China National Accreditation Service for
                                          Conformity Assessment (CNAS)
                                          The Registration Number is CNAS L3193

                                          Accredited by American Association for Laboratory Accreditation
                                          (A2LA)
                                          The Certificate Number is 4297.01

                   Name of Firm       :   Shenzhen Accurate Technology Co., Ltd.
                   Site Location      :   1/F., Building A, Changyuan New Material Port, Science
                                          & Industry Park, Nanshan District, Shenzhen, Guangdong, P.R.
                                          China


                 1.5.Measurement Uncertainty

                   Conducted Emission Expanded Uncertainty         =    2.72dB, k=2
                   (Mains ports, 9kHz-30MHz)

                   Radiated emission expanded uncertainty          =    2.66dB, k=2
                   (9kHz-30MHz)

                   Radiated emission expanded uncertainty          =    4.28dB, k=2
                   (30MHz-1000MHz)

                   Radiated emission expanded uncertainty          =    4.98dB, k=2
                   (1G-18GHz)

                   Radiated emission expanded uncertainty          =    5.06dB, k=2
                   (18G-26.5GHz)




FCC ID: 2AG2K-PEG-001                                                        Shenzhen Accurate Technology Co., Ltd


                                                                                Report No.: ATE20190983
                                                                                             Page 6 of 28




          2. MEASURING DEVICE AND TEST EQUIPMENT


                 2.1.For Radiated Emission Measurement

   Item Equipment             Manufacturer     Model No.     Serial No.           Last Cal.          Cal.
                                                                                                     Interval
   1.     Spectrum Analyzer   Agilent          E7405A        MY45115511           Jan.05, 2019       1 Year
   2.     Spectrum Analyzer   Rohde&Schwarz    FSV40         101495               Jan.05, 2019       1 Year
   3.     Test Receiver       Rohde&Schwarz    ESCS30        100307               Jan.05, 2019       1 Year
   4.     Test Receiver       Rohde& Schwarz   ESPI          100396/003           Jan.05, 2019       1 Year
   5.     Test Receiver       Rohde& Schwarz   ESPI          101526/003           Jan.05, 2019       1 Year
   6.     Test Receiver       Rohde& Schwarz   ESR           101817               Jan.05, 2019       1 Year
   7.     Bilog Antenna       Schwarzbeck      VULB9163      9163-194             Jan.05, 2019       1 Year
   8.     Bilog Antenna       Schwarzbeck      VULB9163      9163-323             Jan.05, 2019       1 Year
   9.     Log.-Per.Antenna    Schwarzbeck      VUSLP 9111B   9111B-074            Jan.05, 2019       1 Year
   10.    Biconical Broad     Schwarzbeck      VHBB          9124-617             Jan.05, 2019       1 Year
          Band Antenna                         9124+BBA
                                               9106
   11.    Loop Antenna        Schwarzbeck      FMZB1516      1516131              Jan.05, 2019       1 Year
   12.    Horn Antenna        Schwarzbeck      BBHA9120D     9120D-655            Jan.05, 2019       1 Year
   13.    Horn Antenna        Schwarzbeck      BBHA9120D     9120D-1067           Jan.05, 2019       1 Year
   14.    Vertical Active     Schwarzbeck      VAMP 9243     9243-370             Jan.05, 2019       1 Year
          Monopole Antenna
   15.    RF Switching        Compliance       RSU-M2        38322                Jan.05, 2019 1 Year
          Unit+PreAMP         Direction
   16.    Pre-Amplifier       Agilent         8447D          294A10619            Jan.05, 2019 1 Year
   17.    Pre-Amplifier       Rohde&Schwarz   CBLU11835      3791                 Jan.05, 2019 1 Year
                                              40-01
   18. 50 Coaxial Switch Anritsu Corp         MP59B          6200237248           Jan.05, 2019       1 Year
   19. 50 Coaxial Switch Anritsu Corp         MP59B          6200506474           Jan.05, 2019       1 Year
   20. RF Coaxial Cable     Schwarzbeck       N-5m           No.1                 Jan.05, 2019       1 Year
   21. RF Coaxial Cable     Schwarzbeck       N-1m           No.6                 Jan.05, 2019       1 Year
   22. RF Coaxial Cable     Schwarzbeck       N-1m           No.7                 Jan.05, 2019       1 Year
   23. RF Coaxial Cable     SUHNER            N-3m           No.8                 Jan.05, 2019       1 Year
   24. RF Coaxial Cable     RESENBERGER N-3.5m               No.9                 Jan.05, 2019       1 Year
   25. RF Coaxial Cable     SUHNER            N-6m           No.10                Jan.05, 2019       1 Year
   26. RF Coaxial Cable     RESENBERGER N-12m                No.11                Jan.05, 2019       1 Year
   27. RF Coaxial Cable     RESENBERGER N-0.5m               No.12                Jan.05, 2019       1 Year
   28. RF Coaxial Cable     SUHNER            N-2m           No.13                Jan.05, 2019       1 Year
   29. RF Coaxial Cable     SUHNER            N-0.5m         No.15                Jan.05, 2019       1 Year
   30. RF Coaxial Cable     SUHNER            N-2m           No.16                Jan.05, 2019       1 Year
   31. RF Coaxial Cable     RESENBERGER N-6m                 No.17                Jan.05, 2019       1 Year
   Radiated Emission Measurement Software: EZ_EMC V1.1.4.2
FCC ID: 2AG2K-PEG-001                                                     Shenzhen Accurate Technology Co., Ltd


                                                                                      Report No.: ATE20190983
                                                                                                   Page 7 of 28




          3. SUMMARY OF TEST RESULTS

                FCC Rules                Description of Test       Result
                Section 15.207           Conducted Emission        N/A
                Section 15.231(b)        Radiated Emission         Compliant
                Section 15.231(c)        20dB Bandwidth            Compliant
                Section 15.231(a)(1)     Release Time        Compliant
                                         Measurement
                Section 15.203           Antenna Requirement Compliant
               The product is a manually operated transmitter.
               Section 15.231 (a) (2), (3), (4) and (5) are not applicable.

               Note: The power supply mode of the EUT is DC 3V, According to the FCC standard
               requirements, conducted emission is not applicable

               All normal using modes of the normal function were tested but only the worst test data of the
               worst mode is recorded by this report.




FCC ID: 2AG2K-PEG-001                                                           Shenzhen Accurate Technology Co., Ltd


                                                                                   Report No.: ATE20190983
                                                                                                Page 8 of 28




          4. THE FIELD STRENGTH OF RADIATION EMISSION


                 4.1.Block Diagram of Test Setup
                        4.1.1.Block diagram of connection between the EUT and simulators

                                                    EUT

                                   (EUT: Wireless remote control vibrator)

                        4.1.2.Semi-Anechoic Chamber Test Setup Diagram

                  (A) Radiated Emission Test Set-Up, Frequency below 30MHz




FCC ID: 2AG2K-PEG-001                                                        Shenzhen Accurate Technology Co., Ltd


                                                                                  Report No.: ATE20190983
                                                                                               Page 9 of 28




                  (B) Radiated Emission Test Set-Up, Frequency below 1GHz




                  (C) Radiated Emission Test Set-Up, Frequency Above 1GHz




FCC ID: 2AG2K-PEG-001                                                       Shenzhen Accurate Technology Co., Ltd


                                                                                        Report No.: ATE20190983
                                                                                                   Page 10 of 28




                 4.2.The Field Strength of Radiation Emission Measurement Limits
                          4.2.1. Radiation Emission Measurement Limits According to FCC Part 15 Section
                                 15.231(b)

                               Frequency Range of            Field Strength of           Field Strength of
                                                           Fundamental Emission         Spurious Emission
                                  Fundamental                   [Average]                   [Average]
                                     [MHz]                        [V/m]                      [V/m]
                                  40.66-40.70                      2250                         225
                                     70-130                        1250                         125
                                    130-174                     1250-3750                     125-375
                                    174-260                        3750                         375
                                    260-470                    3750-12500                    375-1250
                                  Above 470                       12500                        1250
                          Where F is the frequency in MHz, the formulas for calculating the maximum
                          permitted fundamental field strengths are as follows: for the band 130-174 MHz,
                          uV/m at 3 meters = 56.81818(F) - 6136.3636; for the band 260-470 MHz, uV/m at
                          3 meters = 41.6667(F) - 7083.3333. The maximum permitted unwanted emission
                          level is 20 dB below the maximum permitted fundamental level.
                          4.2.2. Restricted Band Radiation Emission Measurement Limits According to FCC
                                 part 15 Section 15.205 and Section15.209.


                 4.3.Configuration of EUT on Measurement
                        The following equipment is installed on Radiated Emission Measurement to meet the
                        commission requirements and operating regulations in a manner which tends to
                        maximize its emission characteristics in normal application.
                          4.3.1. Wireless remote control vibrator (EUT)
                               Model Number         :   PEG-001
                               Serial Number        :   1900780
                               Manufacturer         :   TOPARC Technology(Shenzhen) Co., Ltd.



                 4.4.Operating Condition of EUT
                          4.4.1.Setup the EUT and simulator as shown as Section 4.1.

                          4.4.2.Turn on the power of all equipment.

                          4.4.3. Let the EUT work in TX mode measure it.




FCC ID: 2AG2K-PEG-001                                                             Shenzhen Accurate Technology Co., Ltd


                                                                                       Report No.: ATE20190983
                                                                                                  Page 11 of 28




                 4.5.Test Procedure
                        The EUT and its simulators are placed on a turntable, which is 0.8 meter high above
                        ground(Below 1GHz). The EUT and its simulators are placed on a turntable, which is
                        1.5 meter high above ground(Above 1GHz). The turntable can rotate 360 degrees to
                        determine the position of the maximum emission level. EUT is set 3.0 meters away
                        from the receiving antenna, which is mounted on an antenna tower. The antenna can be
                        moved up and down between 1.0 meter and 4 meters to find out the maximum
                        emission level. Broadband antenna (calibrated bi-log antenna) is used as receiving
                        antenna. Both horizontal and vertical polarizations of the antenna are set on
                        measurement. In order to find the maximum emission levels, all of the EUT location
                        must be manipulated according to ANSI C63.10:2013 on radiated emission
                        measurement. The EUT was tested in 3 orthogonal planes.

                        The bandwidth of test receiver is set at 120 kHz in 30-1000 MHz, and 1 MHz in
                        1000-5000 MHz.

                        The frequency range from 9kHz to 5000MHz is checked.


                 4.6.DATA SAMPLE
                  Frequency        Reading     Factor      Result       Limit         Margin         Remark
                  (MHz)            (dBv)      (dB/m)      (dBv/m)     (dBv/m)      (dB)
                  X.XX             49.83       -22.03      27.80        43.50         -15.70         QP

                        Frequency(MHz) = Emission frequency in MHz
                        Reading(dBv) = Uncorrected Analyzer/Receiver reading
                        Factor (dB/m)= Antenna factor + Cable Loss – Amplifier gain
                        Result(dBv/m) = Reading + Factor
                        Limit (dBv/m)= Limit stated in standard

                        Margin (dB) = Result(dBv/m) - Limit (dBv/m)

                        Calculation Formula:

                        Margin(dB) = Result (dBv/m)–Limit(dBv/m)
                        Result(dBv/m)= Reading(dBv)+ Factor(dB/m)

                        The “Margin” column of the following data tables indicates the degree of compliance
                        with the applicable limit. For example, a margin of -7dB means the emission is 7dB
                        below the limit.




FCC ID: 2AG2K-PEG-001                                                            Shenzhen Accurate Technology Co., Ltd


                                                                                              Report No.: ATE20190983
                                                                                                         Page 12 of 28




                 4.7.The Field Strength of Radiation Emission Measurement Results
                        PASS.

                        Note: The radiation emissions from 9KHz-30MHz are not reported, because the test values lower
                        than the limits of 20dB.

EUT:                Wireless remote control vibrator
Model No.:          PEG-001                                 Power Supply:           DC 3V
Test Mode:          433.92MHz TX                            Test Engineer:          Frank

Frequency     Reading         Factor     Average    Result(dBV/m)     Limit(dBV/m)        Margin(dB)           Polarization
 (MHz)       (dBV/m)          Corr.      Factor
                 PEAK           (dB)       (dB)      AV      PEAK      AV      PEAK         AV       PEAK
 433.92        104.71         -17.78      -8.02     78.91     86.93   80.83    100.83     -1.92      -13.90
 749.676        43.84         -10.34         /         33.50(QP)            46.00              -12.50
 867.85         70.02          -7.98      -8.02     54.02     62.04   60.83    80.83      -6.81      -18.79       Horizontal
 1301.76        54.92          -1.55      -8.02     45.35     53.37   60.83    80.83     -15.48      -27.46
2169.647        54.04           1.78      -8.02     47.80     55.82   60.83    80.83     -13.03      -25.01
 433.92        101.28         -17.78      -8.02     75.48     83.50   80.83    100.83     -5.35      -17.33
 749.676        44.05         -10.34         /         33.71(QP)            46.00              -12.29
 867.85         65.37          -7.98      -8.02     49.37     57.39   60.83    80.83     -11.46      -23.44        Vertical
 1301.76        55.17          -1.55      -8.02     45.60     53.62   60.83    80.83     -15.23      -27.21
2169.647        51.67           1.78      -8.02     45.43     53.45   60.83    80.83     -15.40      -27.38


Note:
1. Emissions attenuated more than 20 dB below the permissible value are not reported.
2. The field strength is calculated by adding the antenna factor, high pass filter loss(if used) and cable loss,
   and subtracting the amplifier gain(if any)from the measured reading. The basic equation calculation is
   as follows:
  Result = Reading + Corrected Factor
  Where Corrected Factor = Antenna Factor + Cable Loss + High Pass Filter Loss – Amplifier Gain
3. FCC Limit for Average Measurement = 41.6667(433.92)-7083.3333 = 10996.681164 V/m =80.83 V/m
4. The spectral diagrams in appendix I display the measurement of peak values.
5. Average value= PK value + Average Factor (duty factor)
6. If the peak-detected amplitude can be shown to comply with the average limit, then it is not necessary to
perform a separate average measurement.
7. The EUT is tested radiation emission in three axes(X,Y,Z). The worst emissions are reported in three
axes.
FCC ID: 2AG2K-PEG-001                                                                   Shenzhen Accurate Technology Co., Ltd


                                                   Report No.: ATE20190983
                                                              Page 13 of 28




8. Pulse Desensitization Correction Factor
  Pulse Width (PW) = 1.587ms
  2/PW = 2/1.26ms = 1.587kHz
  RBW (100 kHz) > 2/PW (1.587kHz)
  Therefore PDCF is not needed




FCC ID: 2AG2K-PEG-001                        Shenzhen Accurate Technology Co., Ltd


                                                                                       Report No.: ATE20190983
                                                                                                  Page 14 of 28




          5. -20DB BANDWIDTH


                 5.1.Block Diagram of Test Setup

                                                                      Spectrum
                               EUT           Low Loss Cable
                                                                      Analyzer

                                  (EUT: Wireless remote control vibrator)


                 5.2.The Bandwidth of Emission Limit According To FCC Part 15 Section

                        15.231(c)
                        The bandwidth of emission shall be no wider than 0.25% of the center frequency.
                        Therefore, the bandwidth of the emission limit is 433.92 MHz×0.25% = 1084.8 kHz.
                        Bandwidth is determined at the two points 20 dB down from the top of modulated
                        carrier.


                 5.3.EUT Configuration on Measurement
                        The following equipment are installed on the bandwidth of emission Measurement to
                        meet the commission requirements and operating regulations in a manner which tends
                        to maximize its emission characteristics in normal application.
                          5.3.1.Wireless remote control vibrator (EUT)
                               Model Number      :   PEG-001
                               Serial Number     :   1900780
                               Manufacturer      :   TOPARC Technology(Shenzhen) Co., Ltd.



                 5.4.Operating Condition of EUT
                          5.4.1.Setup the EUT and simulator as shown as Section 5.1.

                          5.4.2.Turn on the power of all equipment.

                          5.4.3.Let the EUT work in TX mode measure it.




FCC ID: 2AG2K-PEG-001                                                            Shenzhen Accurate Technology Co., Ltd


                                                                                                                       Report No.: ATE20190983
                                                                                                                                  Page 15 of 28




                 5.5.Test Procedure
                           5.5.1. Set SPA Center Frequency = Fundamental frequency, RBW = 10 kHz, VBW
                                  = 30 kHz, Span = 500kHz.

                           5.5.2.Set SPA Max hold, Mark peak, -20 dB.


                 5.6.Measurement Result

                        The EUT does meet the FCC requirement.

                        -20 dB bandwidth =44 kHz <1084.8 kHz.

                        The test chart of -20 dB bandwidth:
                                                                               * RBW 10 kHz   Delta 3 [T1 ]
                                                                               * VBW 30 kHz             -20.11 dB
                                Ref    20 dBm               Att    40 dB           SWT 5 ms       21.000000000 kHz
                                20    Offset    10 dB                                         Marker 1 [T1 ]
                                                                                                         -2.12   dBm
                                                                                                 433.926000000   MHz    A
                                10
                                                                                              Delta 2 [T1 ]
                        1 PK
                                                                                                        -20.04   dB
                        MAXH                                                   1
                                0                                                                -23.000000000   kHz
                                                                                                                       LVL

                                -10



                                -20                                        2        3
                                         D1 -22.12 dBm


                                -30



                                -40



                                -50



                                -60



                                -70


                                -80

                                Center 433.92 MHz                          50 kHz/                    Span 500 kHz



                        Date:          5.JUL.2019       18:12:27




FCC ID: 2AG2K-PEG-001                                                                                       Shenzhen Accurate Technology Co., Ltd


                                                                                       Report No.: ATE20190983
                                                                                                  Page 16 of 28




          6. RELEASE TIME MEASUREMENT


                 6.1.Block Diagram of Test Setup

                                                                      Spectrum
                               EUT           Low Loss Cable
                                                                      Analyzer

                                   (EUT: Wireless remote control vibrator)


                 6.2.Release Time Measurement According To FCC Part 15 Section 15.231(a)
                        Section 15.231(a) (1) A manually operated transmitter shall employ a switch that will
                        automatically deactivate the transmitter within not more than 5 seconds of being
                        released.


                 6.3.EUT Configuration on Measurement
                        The following equipment are installed on Release Time Measurement to meet the
                        commission requirements and operating regulations in a manner which tends to
                        maximize its emission characteristics in normal application.
                           6.3.1. Wireless remote control vibrator (EUT)
                               Model Number       :   PEG-001
                               Serial Number      :   1900780
                               Manufacturer       :   TOPARC Technology(Shenzhen) Co., Ltd.




FCC ID: 2AG2K-PEG-001                                                            Shenzhen Accurate Technology Co., Ltd


                                                                                        Report No.: ATE20190983
                                                                                                   Page 17 of 28




                 6.4.Operating Condition of EUT
                           6.4.1.Setup the EUT and simulator as shown as Section 6.1.

                           6.4.2.Turn on the power of all equipment.

                           6.4.3.Let the EUT work in TX mode measure it.


                 6.5.Test Procedure
                           6.5.1. Set SPA Center Frequency = Fundamental frequency, RBW = 1000 kHz,
                                  VBW = 3000 kHz, Span = 0 Hz. Sweep time = 10 s.

                           6.5.2.Set EUT as normal operation and press Transmitter button.

                           6.5.3.Set SPA View. Delta Mark time.


                 6.6. Measurement Result

                        The release time less than 5 seconds.

                        Release Time = 0.66s

                        The spectral diagrams in appendix I.




FCC ID: 2AG2K-PEG-001                                                            Shenzhen Accurate Technology Co., Ltd


                                                                                      Report No.: ATE20190983
                                                                                                 Page 18 of 28




          7. AVERAGE FACTOR MEASUREMENT


                 7.1.Block Diagram of Test Setup

                                                                     Spectrum
                              EUT            Low Loss Cable
                                                                     Analyzer

                                  (EUT: Wireless remote control vibrator)


                 7.2.Average factor Measurement according to ANSI C63.10-2013
                  ANSI C63.10-2013 Section 7.5 Unless otherwise specified, when the radiated emission
                  limits are expressed in terms of the average value of the emission, and pulsed operation is
                  employed, the measurement field strength shall be determined by averaging over one
                  complete pulse train, including blanking intervals, as long as the pulse train does not
                  exceed 0.1 s (100 ms). In cases where the pulse train exceeds 0.1 s, the measured field
                  strength shall be determined during a 0.1 s interval.64 The following procedure is an
                  example of how the average value may be determined. The average field strength may be
                  found by measuring the peak pulse amplitude (in log equivalent units) and determining
                  the duty cycle correction factor (in dB) associated with the pulse modulation as shown in
                  Equation (10):
                  Average factor in dB = 20 log (duty cycle)


                 7.3.EUT Configuration on Measurement
                        The following equipment are installed on average factor Measurement to meet the
                        commission requirements and operating regulations in a manner which tends to
                        maximize its emission characteristics in normal application.
                          7.3.1. Wireless remote control vibrator
                               Model Number      :   PEG-001
                               Serial Number     :   1900780
                               Manufacturer      :   TOPARC Technology(Shenzhen) Co., Ltd.




FCC ID: 2AG2K-PEG-001                                                           Shenzhen Accurate Technology Co., Ltd


                                                                                        Report No.: ATE20190983
                                                                                                   Page 19 of 28




                 7.4.Operating Condition of EUT
                           7.4.1.Setup the EUT and simulator as shown as Section 7.1.

                           7.4.2.Turn on the power of all equipment.

                           7.4.3.Let the EUT work in TX mode measure it.


                 7.5.Test Procedure
                           7.5.1.The time period over which the duty cycle is measured is 100 milliseconds, or
                                 the repetition cycle, whichever is a shorter time frame. The worst case
                                 (highest percentage on) duty cycle is used for the calculation.

                           7.5.2.Set SPA Center Frequency = Fundamental frequency, RBW = 100 kHz,
                                 VBW= 300 kHz, Span = 0 Hz.

                           7.5.3.Set EUT as normal operation.

                           7.5.4.Set SPA View. Delta Mark time.


                 7.6. Measurement Result
                        The duty cycle is simply the on time divided by the period:

                        The duration of one cycle = 100.0ms

                        Effective period of the cycle = (1.24×24) + (4.96×2)ms =39.68 ms

                        DC =39.68ms/100. 0ms=0.3968

                        Therefore, the average factor is found by 20log0.3968= -8.03dB

                        The spectral diagrams in appendix I.




FCC ID: 2AG2K-PEG-001                                                             Shenzhen Accurate Technology Co., Ltd


                                                                                          Report No.: ATE20190983
                                                                                                     Page 20 of 28




          8. ANTENNA REQUIREMENT


                8.1.The Requirement
                        According to Section 15.203, an intentional radiator shall be designed to ensure that no
                        antenna other than that furnished by the responsible party shall be used with the device.


                8.2.Antenna Construction
                        Device is equipped with permanent attached antenna, which isn’t displaced by other
                        antenna. The Antenna gain of EUT is 0dBi. Therefore, the equipment complies with the
                        antenna requirement of Section 15.203.




                                         Antenna




FCC ID: 2AG2K-PEG-001                                                               Shenzhen Accurate Technology Co., Ltd


                                              Report No.: ATE20190983
                                                         Page 21 of 28




                        APPENDIX I
                        (Test Curves)




FCC ID: 2AG2K-PEG-001                   Shenzhen Accurate Technology Co., Ltd


                                                                         Report No.: ATE20190983
                                                                                    Page 22 of 28




Note: the peak limit for fundamental frequency is 100.83 dBuV/m.

                                                                        Fundamental frequency




FCC ID: 2AG2K-PEG-001                                              Shenzhen Accurate Technology Co., Ltd


                                                                         Report No.: ATE20190983
                                                                                    Page 23 of 28




Note: the peak limit for fundamental frequency is 100.83 dBuV/m.

                                                                   Fundamental frequency




FCC ID: 2AG2K-PEG-001                                              Shenzhen Accurate Technology Co., Ltd


(um


                                        ACCURATE TECHNOLOGY CO., LTD.                                                              Site: 1# Chamber

                                          F1,Bidg,A,Changyuan New Material Port Keyuan Rd,                                   Tel:+86—0755—26503290
                                          Science & Industry Park,Nanshan Shenzhen,P.R.China                                 Fax:+86—0755—26503396
Job No.:         FRANK2019 #1234                                                                  Polarization:         Horizontal
Standard: FCC 15.231a                                                                             Power Source:          DC 3V
Test item:         Radiation Test                                                                 Date: 19/07/05/
Temp.(         C)Hum.(%) 25            C/55%                                                      Time: 134916
EUT:              Wireless remote control vibrator                                                Engineer Signature:
Mode:            433.92MHz TX                                                                     Distance:       3m
Model:           PEG—001
Manufacturer: TOPARC TECHNOLOGY(SHENZHEN) CO.,LTD.
Note:          Report NO.:ATE20190983



      90.0      dBuV/m




      BB      [e.corooeerane e oeevedvaeveovvaervevee en nep recvenenenneoeeendnncbeinns 4. reoereavenyevereniddedesnnebnesrenng o veccedecas

      60

      50


      40


      30


      20


      10

      0.0                                                     ;
            1000.000                                         éflflfl                          3000                4000              5000   6000.0 MHz


                 Freq.          Reading         Factor            Result       Limit      [Margin              Height    Degree
Ne:             (MHz)          (dBuVim)          (dB)       (dBuvim) (dBuvim)| (ag) P°°""| (em)                           (eg)       Remek
i                130i.762]       5492            —155             5337        80.83       |—27.46| peak          200       153
7                1735.651|       4815            179              4994        80.83       |—30.89| peak          200       103
$                2169.647|       —54.04          176              55.52       80.83       |—25.01| peak          200       315


                              Report No.: ATE20190983
                                         Page 25 of 28




FCC ID: 2AG2K-PEG-001   Shenzhen Accurate Technology Co., Ltd


                                                                                                                 Report No.: ATE20190983
                                                                                                                            Page 26 of 28




                                                                              RBW 1 MHz    Delta 2 [T1 ]
                                                                             * VBW 3 MHz               0.79 dB
                                Ref    10 dBm               Att    30 dB      SWT 10 s           660.000000 ms
                                10    Offset    10 dB                                      Marker 1 [T1 ]
                                                                                                     -45.86 dBm
                                                                                                   3.220000 s      A
                                0
                                                                                                                  SGL
                        1 PK
                        MAXH
                                -10
                                                                                                                  LVL

                                -20



                                -30



                                -40
                                                            1      2


                                -50



                                -60



                                -70



                                -80


                                -90

                                Center 433.92 MHz                          1 s/



                        Date:          6.JUL.2019       13:17:41



Release Time = 0.66s




FCC ID: 2AG2K-PEG-001                                                                                   Shenzhen Accurate Technology Co., Ltd


                                                                                   Report No.: ATE20190983
                                                                                              Page 27 of 28




The graph shows the pattern of coding during the signal transmission.
The duration of one cycle = 100.0ms.

                                                        RBW 100 kHz
                                                       * VBW 300 kHz
         Ref    20 dBm               Att    40 dB       SWT 100 ms
         20    Offset    10 dB

                                                                       A
         10
                                                                       SGL
1 PK *
CLRWR
         0
                                                                       LVL

         -10



         -20



         -30



         -40



         -50



         -60



         -70


         -80

         Center 433.92 MHz                          10 ms/



Date:           5.JUL.2019       18:29:48




FCC ID: 2AG2K-PEG-001                                                        Shenzhen Accurate Technology Co., Ltd


                                                                                                                Report No.: ATE20190983
                                                                                                                           Page 28 of 28

                                                              RBW 100 kHz    Delta 2 [T1 ]
                                                             * VBW 300 kHz              -0.07 dB
         Ref    20 dBm                  Att        40 dB      SWT 10 ms              1.260000 ms
         20    Offset       10 dB                                            Marker 1 [T1 ]
                                                                                       -49.37 dBm
                                                                                     2.440000 ms    A
         10
                                                                                                    SGL
1 PK *
CLRWR
         0
                                                                                                    LVL

         -10



         -20



         -30



         -40

                                    1          2
         -50



         -60



         -70


         -80

         Center 433.92 MHz                                 1 ms/



Date:           5.JUL.2019          18:30:27



The graph shows the duration of ‘on’ signal. From marker 1 to delta 1, duration is 1.26ms.

                                                              RBW 100 kHz    Delta 2 [T1 ]
                                                             * VBW 300 kHz               1.97 dB
         Ref    20 dBm                  Att        40 dB      SWT 20 ms              4.940000 ms
         20    Offset       10 dB                                            Marker 1 [T1 ]
                                                                                       -48.08 dBm
                                                                                     2.960000 ms    A
         10
                                                                                                    SGL
1 PK *
CLRWR
         0
                                                                                                    LVL

         -10



         -20



         -30



         -40
                                                   2
                        1
         -50



         -60



         -70


         -80

         Center 433.92 MHz                                 2 ms/



Date:           5.JUL.2019          18:31:11



The graph shows the duration of ‘on’ signal. From marker 1 to delta 1, duration is 4.94ms.




FCC ID: 2AG2K-PEG-001                                                                                     Shenzhen Accurate Technology Co., Ltd



Document Created: 2019-07-25 11:10:53
Document Modified: 2019-07-25 11:10:53

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC