FCC+DTS+UNII+Declaration

FCC ID: 2AFZZC3XG

Cover Letter(s)

Download: PDF
FCCID_4483430

Xiaomi Communications Co.,Ltd The Rainbow City of China Resources,No.68,Qinghe Middle Street,Haidian District,Beijing,100000,China UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: 2AFZZC3XG (1) DFS Device -- Master, Client with Radar detection capability , ■ Client without radar detection capability, N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band Active Scanning passive scanning Ad Hoc Mode Access point (MHz) (the device can (where the device capability capability transmit a probe is (beacon)) can listen only with no probes) 2412 – 2462 MHz Yes, ■ No Yes, ■ No ■ Yes, No Yes, ■ No 2422 – 2452 MHz Yes, ■ No Yes, ■ No ■ Yes, No Yes, ■ No 5745 – 5825 MHz Yes, ■ No Yes, ■ No ■Yes, No Yes, ■ No 5755 – 5795 MHz Yes, ■ No Yes, ■ No ■Yes, No Yes, ■ No 5180 – 5240 MHz Yes, ■ No Yes, ■ No ■ Yes, No Yes, ■ No 5190 – 5230 MHz Yes, ■ No Yes, ■ No ■ Yes, No Yes, ■ No 5260 – 5320 MHz Yes, ■ No Yes, ■ No Yes, ■ No Yes, ■ No 5270 – 5310 MHz Yes, ■ No Yes, ■ No Yes, ■ No Yes, ■ No 5500 – 5700 MHz Yes, ■ No Yes, ■ No Yes, ■ No Yes, ■ No 5510 – 5670 MHz Yes, ■ No Yes, ■ No Yes, ■ No Yes, ■ No (3) Country code selection ability - Yes , ■ No If no, pls explain how was implemented : use Microsoft network utility (4) Meet 15.202 requirement - ■ Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices ■ A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , ■ No Apply , (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Xiaomi Communications Co., Ltd. Printed Name:Jiao Xiao Gang Position：Certification Director


Document Created: 2019-10-09 10:00:40
Document Modified: 2019-10-09 10:00:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC