User manual

FCC ID: 2AFZZ-XMSF1G

Users Manual

Download: PDF
FCCID_4145769

啢貏忲梽〃藥⺸槪豈蹕鄘 旿誑䯤YYYYYYYYYYYY 穼梪䯤B 窹旿抰㫼䯒謖蠙䯓䯤G2!駱䃸慇攢!餚旝穼 Legal Information - Reorient or relocate the receiving antenna. Temperature: 0 °C - 40 °C This device may be operated in all member states of the EU. Observe national and local regulations where the device is used.. This device is restricted to indoor use only when operating in 5150 to - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Install the adapter near the device in an easily accessible position. Model: M1902F1G 蹕鄘僨壉暀梕䯤312:妘2桸4暀 - Consult the dealer or an experienced radio/TV technician for help. 1902 indicates the date of putting the product on the market is 201902 5350Mhz frequency range in following countries : AT BE BG HR CY CZ DK EE FI FR DE EL HU IE Disclaimer IT PT LV RO LT SK LU SI MT ES NL SE PL UK RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio This User Guide is published by Xiaomi or its local affiliated company. Improvements and changes to this User Guide necessitated by 棞旿䯤 Ensure the power adapter used meets the requirements of Clause 2.5 in waves. This device is designed and manufactured not to exceed the typographical errors, inaccuracies of current information, or IEC60950-1/EN60950-1 and has been tested and approved according to emission limits for exposure to radio frequency (RF) energy. The exposure improvements to programs and/or equipment, may be made by Xiaomi at national or local standards. standard for wireless devices employs a unit of measurement any time and without notice. Such changes will, however, be incorporated known as the Specific Absorption Rate, or SAR. into new editions of this User Guide. All illustrations are for illustration The SAR limit set by the FCC is 1.6W/Kg. For body-worn operation, this purposes only and may not accurately depict the actual device. Frequency Bands and Power device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.0 cm from the body. Use of other accessories may not 㳟趼俒裶櫎!216h!晹賂㿫 This mobile phone offers the following frequency bands in EU areas only ensure compliance with FCC RF exposure guidelines. If you do not use a and maximum radio-frequency power : body-worn accessory and are not holding the device at the ear, position 231nn GSM 900: 35 dBm the handset a minimum of 1.0 cm from your body when the device is GSM 1800: 32 dBm switched on. UMTS band 1/8: 25 dBm LTE band 1/3/7/8/20/28/38/40: 25.7 dBm Bluetooth: 20 dBm Wi-Fi 2.4 GHz band: 20 dBm Wi-Fi 5 GHz: 5150~5350MHz: 20dBm, 5470~5725MHz: 20dBm, FCC Note 5725~5825MHz: 14dBm Changes or modifications not expressly approved by the party responsible NFC: 13.56Mhz < -5.40 dBuA/m at 10m for compliance could void the user’s authority to operate the equipment. FCC Regulations This mobile phone complies with part 15 of the FCC Rules. Operation is E-label subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference This device has an electronic label for certification information. received, including interference that may cause undesired operation. To access it, please select Settings> About Phone >Certification or select This mobile phone has been tested and found to comply with the limits for Settings, then type “Certification” into the search bar. a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may Important Safety Information Manufacturer : Xiaomi Communications Co., Ltd. cause harmful interference to radio communications. SAR 10g limit: 2.0W/Kg, SAR Value: Head: 1.389 W/Kg, Manufacturer postal address: The Rainbow City of ▕梪酁椨墡頯䯤 However, there is no guarantee that interference will not occur in a particular installationi. If this equipment does cause harmful interference Body: 1.301 W/Kg (5mm distance). SAR 1g limit: 1.6W/Kg, SAR Value: Head: 0.99 W/Kg, China Resources, NO.68, Qinghe Middle Street, Haidian District, Beijing, China 100085 Mi 9 to radio or television reception, which can be determined by turning the Body-worn: 0.82 W/Kg (10mm distance). Brand: MI Model: M1902F1G User Guide equipment off and on, the user is encouraged to try to correct the Hotspot: 1.04 W/Kg (10mm distance). All rights reserved by Xiaomi Inc. interference by one or more of the following measures: 000000000000-A 76nn 澐鑨闐熌 371nn Correctly dispose of this product. This marking indicates that this Thank you for choosing Mi 9 Long press the power button to turn on the device. product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from Safety precautions · Observe any law and rule which restricts using mobile phones in specific cases and environments. 浧賽鄡 紙鄡 Follow the on-screen instructions to configure the device. uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. · Do not use your phone in petrol stations and explosive atmospheres and potentially To safely recycle your device, please use return and collection systems or contact explosive environments include fuelling areas, below decks on boats, fuel or the retailer where the device was originally purchased. chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your phone or other radio For more information For Environment Declaration, please refer to the link below: ▕梪棧獸墡頯䯤 http://www.mi.com/en/about/environment/ equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off “two-way radios” or “electronic devices” to avoid interfering Visit our official website: www.mi.com. with blasting operations. · Do not use your phone in the hospital operating rooms, emergency rooms, or intensive care units. Comply with the current rules and regulations of hospitals and Saturday, August 16 CAUTION health centers. Please consult your doctor and the device manufacturer to Volume RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. determine if operation of your phone may interfere with the operation of your Buttons MIUI DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS. medical device. To avoid potential interference with the pacemaker, maintain a separation of 15cm between the mobile phone and the pacemaker. To achieve this, Mi 9 comes pre-installed with MIUI, our customised Android-based OS use the phone on the opposite ear to your pacemaker and do not carry it in a breast AI Power which pushes frequent updates and user-friendly features suggested by over 200 million active users worldwide. For more information, please visit www.miui.com. To prevent possible hearing damage,do not listen at high volume levels for long periods. pocket. Do not use your phone near hearing aids, cochlear implants, etc., to avoid interference with medical equipment. · Respect aircraft safety regulations and turn off your phone on board the aircraft when required. 豕頥 For more important safety information, please refer to User Manual in the link below : Button Button http://www.mi.com/en/certification/ · When driving a vehicle, use your phone in accordance with the relevant traffic laws and regulations. · To avoid lightning strike, do not use your phone outdoors during thunderstorms. Important safety information · Do not use your phone to make calls while it is charging. SIM Card Tray: · Read all the safety information below before using your device. · Do not use your phones in places with high humidity such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage. · Using unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks. · Use only authorized accessories which are compatible with your device. Obop.TJN This device’s operating temperature range is 0 °C~40 °C. Using this device in the Security notice environments outside of this temperature range may damage the device. · If your device is provided with a built-in battery, don’t attempt to replace the battery Update your phone’s operating system using the built-in software update feature, or yourself to avoid damaging the battery or the device. visit our authorized service outlets. Updating software through other means may Obop.TJN damage the device or result in data loss, security issues, and other risks. · Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter. The laser in the product is a class 1 laser. · After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device longer than 12 hours. · The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the EU Regulations device, its battery and accessories according to the local regulations. About Dual SIM: · Do not disassemble, hit, crush, or burn the battery. In case of deformation, stop RED Declaration of Conformity using the battery immediately. We, Xiaomi Communications Co., Ltd., · Dual 4G SIM requires the support of local telecom operator services, and - Do not short circuit the battery to avoid overheating, burns, or other personal may not be available in all regions. injuries. Hereby, Xiaomi Communications Co., Ltd., declares that this GSM/GPRS/ · Supports dual nano-SIM cards. When using both SIM card slots, either - Do not place the battery in the high-temperature environments. EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth and WiFi M1902F1G is in Overheating may cause explosion. compliance with the essential requirements and other relevant provisions of the RE card can be set as the primary card. - Do not disassemble, hit, or crush the battery to avoid battery leaks, Directive 2014/53/EU. The full text of the EU declaration of conformity could be · Only certain regions and telecom operators support VoLTE. overheating, or explosion. consulted at www.mi.com/en/certification · System updates may be applied when network optimization occurs. For - Do not burn the battery to avoid fire or explosion. details, please refer to the system version in use on the device. - In case of deformation, stop using the battery immediately. · Keep your device dry. · Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center. Body-worn SAR testing has been carried out at a separation distance of 5 mm . To meet RF exposure guidelines during body-worn operation, the device should be positioned at least this distance away from the body. Qboupof!Dppm!Hsbz!9D USB Type-C Port If you are not using an approved accessory, ensure that whatever products used is · Connect other devices according to their instruction manuals. Do not connect free of any metal and that it positions the phone with the indicated distance away incompatible devices to this device. from the body. · For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be Receiver Category 2 easily accessible. 謾骼竑濇燍嶯鲇䎋䯤 辭姉縟旿誑䯖㛽辭姉縟樰懪㓇呯靕 ゔ擄 妛棧獸 叄鉢䯤Bsjbm!!4qu


Document Created: 2019-09-19 17:08:49
Document Modified: 2019-09-19 17:08:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC