SAR report part 3

FCC ID: 2AFZZ-RSG138

RF Exposure Info

Download: PDF
FCCID_3283219

h & In Collaboration with sb jr, y @777 _p_e_a M s\ CNAs mR $X l/’l limzamzyye~ CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China S ",//-\§ v CAUBRA“ON Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 ”"I:/.I-\\\\‘\‘\ CNAS LO570 E—mail: cttl@chinattl.com Hitp://www.chinattl.en Client Sporton—CN Certificate No: Z16—97231 CALIBRATION CERTIFICATE Object D2450V2 — SN: 840 Calibration Procedure(s) FD—211—003—01 Calibration Procedures for dipole validation kits Calibration date: November 25, 2016 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(Sl). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(22+3)‘c and humidity<70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Power Meter NRP2 101919 27—Jun—16 (CTTL, No.J16X04777) Jun—17 Power sensor NRP—Z91 101547 27—Jun—16 (CTTL, No.J16X04777) Jun—17 Reference Probe EX3DV4 SN 7433 26—Sep—16(SPEAG,No.EX3—7433_Sep16) Sep—17 DAE4 SN 771 02—Feb—16(CTTL—SPEAG,No.Z16—97011) Feb—17 Secondary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Signal Generator E4438C MY49071430 O01—Feb—16 (CTTL, No.J16X00893) Jan—17 Network Analyzer E5071C MY46110673 26—Jan—16 (CTTL, No.J16X00894) Jan—17 Name Function Signature Calibrated by: Zhao Jing SAR Test Engineer é Z/ Reviewed by: Qi Dianyuan SAR Project Leader %/ Approved by: Lu Bingsong Deputy Director of the laboratory Efl%% Issued: Novembér 27, 2016 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: Z16—9723 1 Page 1 of 8

=‘TT_Z: In Collaboration with s s p e a g y CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Http://www.chinattl.cn Glossary: TSL tissue simulating liquid ConvrF sensitivity in TSL / NORMx,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) For hand—held devices used in close proximity to the ear (frequency range of 300MHz to 3GHz)", February 2005 c) IEC 62209—2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless communication devices used in close proximity to the human body (frequency range of 30MHz to 6GHz)", March 2010 d) KDB865664, SAR Measurement Requirements for 100 MHz to 6 GHz Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. e SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distribution Corresponds to a coverage probability of approximately 95%. Certificate No: Z16—9723 1 Page 2 of 8

=TTL In Collaboration with foane s_ p_ _e_ a q y CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Http:/www.chinattl.cn Me asurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY52 52.8.8.1258 Extrapolation Advanced Extrapolation Phantom Triple Flat Phantom 5.1C Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz = 5 mm Frequency 2450 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 38.9 +6 % 1.79 mho/m +6 % Head TSL temperature change during test <1.0 °C ———— SA R result with Head TSL SAR averaged over 1 Cm" (1 g) of Head TSL Condition SAR measured 250 mW input power 13.5 mW / g SAR for nominal Head TSL parameters normalized to 1W 54.0 mW ig * 20.8 % (k=2) SAR averaged over 10 cm> (10 g) of Head TSL Condition SAR measured 250 mW input power 6.33 mW / g SAR for nominal Head TSL parameters normalized to 1W 25.3 mW ig £ 20.4 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 52.3 £6% 1.97 mho/m + 6 % Body TSL temperature change during test <1.0 °C SAR result with Body TSL SAR averaged over 1 cm> (1 g) of Body TSL Condition SAR measured 250 mW input power 12.8 mW / g SAR for nominal Body TSL parameters normalized to 1W 50.9 mW /g + 20.8 % (k=2) SAR averaged over 10 cm (10 g) of Body TSL Condition SAR measured 250 mW input power 6.02 mW / g SAR for nominal Body TSL parameters normalized to 1W 24.0 mW ig * 20.4 % (k=2) Certificate No: Z16—9723 1 Page 3 of 8

b| In Collaboration with @‘/"[‘] C s P e _a d CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Http:/www.chinattl.cn Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point 51.70+ 5.54jQ Return Loss — 24.90B Antenna Parameters with Body TSL Impedance, transformed to feed point 49.80+ 6.00j0 Return Loss — 24.40B General Antenna Parameters and Design Electrical Delay (one direction) 1.045 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Certificate No: Z16—9723 1 Page 4 of 8

@TTL aag y In Collaboration with s &umenonhnmmomfl e _a Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Http:/www.chinattl.en DASY5 Validation Report for Head TSL Date: 11.25.2016 Test Laboratory: CTTL, Beijing, China DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 840 Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1: 1 Medium parameters used: f= 2450 MHz; 0 = 1.793 S/m; sr = 38.86; p = 1000 kg/m3 Phantom section: Center Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2007) DASY5 Configuration: e Probe: EX3DV4 — SN7433; ConvF(7.45, 7.45, 7.45); Calibrated: 9/26/2016; e Sensor—Surface: 2mm (Mechanical Surface Detection) e Electronics: DAE4 Sn771; Calibrated: 2/2/2016 e Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1161/1 e Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372) Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 107.5 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) =27.5 W/kg SAR(I g) =13.5 W/kg; SAR(10 g) = 6.33 W/kg Maximum value of SAR (measured) =20.5 W/kg dB 0 —4.30 —8.60 —12.91 —17.21 —21.51 > 0 dB = 20.5 W/kg =13.12 dBW/kg Certificate No: Z16—97231 Page 5 of 8

mmC in Collaboration with =‘/"/‘/, a § & CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Http:/www.chinattl.en Impedance Measurement Plot for Head TSL Tri s11 Log Mag 10.00dB/ Ref 0.000d8 [F1] seyoo »1 2.4500000 GHz —24.887 ds 40. 00 30. 00 20. 00 10. 00 0. 000 p) 4 —10. 00 1 —20. 00 —30. 00 —40. 00 —50. 00 i PM@é sil smith (R+jX) scale 1.000Uu [F1 del] »1 2.4500000 GHz 51.727 o 5.5413 o 359.92—phH° V 1‘Start2.25 GHz _ __ Maietespaietia IFBW 100Hz hT | Stop 2.65 GHz BB‘ Certificate No: Z16—9723 1 Page 6 of 8

_‘__AR In Collaboration with @_‘/"/‘]/, a e CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Http:/www.chinattl.cn DASY5 Validation Report for Body TSL Date: 11.24.2016 Test Laboratory: CTTL, Beijing, China DUT : Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 840 Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1:1 Medium parameters used: f= 2450 MHz; 0 = 1.966 S/m; s, = 52.29; p = 1000 kg/m* Phantom section: Left Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C€63.19—2007) DASY5 Configuration: e Probe: EX3DV4 — SN7433; ConvF(7.46, 7.46, 7.46); Calibrated: 9/26/2016; e Sensor—Surface: 2mm (Mechanical Surface Detection) e Electronics: DAF4 Sn771; Calibrated: 2/2/2016 e Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1161/1 e Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372) Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 99.46 V/m; Power Drift =—0.01 dB Peak SAR (extrapolated) = 25.9 W/kg SAR(1 g) =12.8 W/kg; SAR(10 g) = 6.02 W/kg Maximum value of SAR (measured) = 19.2 W/kg dB 0 —4.40 —8.79 —13.19 —17.58 L. —21.98 0 dB = 19.2 W/kg = 12.83 dBW/kg Certificate No: Z16—9723 1 Page 7 of 8

aT7TL s s"p a In Collaboration with dn e a V CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Http:/www.chinattl.cn Impedance Measurement Plot for Body TSL Tri S11 Log Mag 10.00d8/ Ref 0.000d8 [F1] 50. 00 »1 2.4500000 GHz —24.430 ds 40. 00 30. 00 20. 00 10. 00 0. 000 p) —10. 00 —20. 00 —30. 00 —40. 00 —50. 00 k rPIWé s11 smith (R+jxX) scale 1.000U [F1 Del] »1 2.4500000 GHz 49.789 n 5.9991 o 389;; [1SMtasesbatiousulnal § 3 souurow io ihe lt xt _ Stop 2.65 anzReail Certificate No: Z16—9723 1 Page 8 of 8

b»’s In Collaboration with s\“\\"_"Ir, '] A F BA J m CALIBRATION LABORATORY CNAs it ETo oS 4,,//-\\C v CALIBRATION Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 ',,,,h‘\“\ CNAS LO570 E—mail: cttl@chinattl.com Http://www.chinattl.cn Client Sporton—CN Certificate No: Z16—97232 CALIBRATION CERTIFICATE Object D2600V2 — SN: 1061 Calibration Procedure(s) FD—211—003—041 Calibration Procedures for dipole validation kits Calibration date: November 24, 2016 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(Sl). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(22+3)‘c and humidity<70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Power Meter NRP2 101919 01—Jul—15 (CTTL, No.J15X04256) Jun—16 Power sensor NRP—Z91 101547 01—Jul—15 (CTTL, No.J15X04256) Jun—16 Reference Probe EX3DV4 SN 7433 26—Sep—16(SPEAG,No.EX3—7433_Sep16) Sep—17 DAE4 SN 771 02—Feb—16(CTTL—SPEAG,No.Z16—97011) Feb—17 Secondary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Signal Generator E4438C MY49071430 O01—Feb—16 (CTTL, No.J16X00893) Jan—17 Network Analyzer E5071C MY46110673 26—Jan—16 (CTTL, No.J16X00894) Jan—17 Name Function Signature Calibrated by: Zhao Jing SAR Test Engineer éZ/ Reviewed by: Qi Dianyuan SAR Project Leader Approved by: Lu Bingsong Deputy Director of the laboratory Issued: November 27, 2016 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: Z16—97232 Page 1 of 8

A| In Collaboration with ®‘7/"7"]J, s p e a g Gipzgmarer CAI.IBI!A'I'IONLABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Http://www.chinattl.cn Glossary: TSL tissue simulating liquid ConvrF sensitivity in TSL / NORMx,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) For hand—held devices used in close proximity to the ear (frequency range of 300MHz to 3GHz)", February 2005 c) IEC 62209—2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless communication devices used in close proximity to the human body (frequency range of 30MHz to 6GHz)", March 2010 d) KDB865664, SAR Measurement Requirements for 100 MHz to 6 GHz Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. e SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distribution Corresponds to a coverage probability of approximately 95%. Certificate No: Z16—97232 Page 2 of 8

mm® in cCollsboration with gan s_ p_ e a {];l/ mumnon-unonxroug Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hittp:/www.chinattl.en Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY52 52.8.8.1258 Extrapolation Advanced Extrapolation Phantom Triple Flat Phantom 5.1C Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz = 5 mm Frequency 2600 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.0 1.96 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 38.3 4+ 6 % 1.94 mho/m +6 % Head TSL temperature change during test <1.0 °C SAR result with Head TSL SAR averaged over 1 C#?" (1 g) of Head TSL Condition SAR measured 250 mW input power 14.0 mW / g SAR for nominal Head TSL parameters normalized to 1W 56.0 mW /g + 20.8 % (k=2) SAR averaged over 10 cm (10 g) of Head TSL Condition SAR measured 250 mW input power 6.41 mW / g SAR for nominal Head TSL parameters normalized to 1W 25.6 mW ig + 20.4 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.5 2.16 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 52.1 +6 % 2.17 mho/im +6 % Body TSL temperature change during test <1.0 °C SAR result with Body TSL SAR averaged over 1 Cm° (1 g) of Body TSL Condition SAR measured 250 mW input power 13.9 mW / g SAR for nominal Body TSL parameters normalized to 1W 55.4 mW ig + 20.8 % (k=2) SAR averaged over 10 cm (10 g) of Body TSL Condition SAR measured 250 mW input power 6.37 mW / g SAR for nominal Body TSL parameters normalized to 1W 25.4 mW 1g + 20.4 % (k=2) Certificate No: Z16—97232 Page 3 of 8

r; [ In Collaboration with cand TTL ces a 5 e CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Http://www.chinattl.cn Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point 50.10— 5.42j0 Return Loss — 25.30B Antenna Parameters with Body TSL Impedance, transformed to feed point 46.40— 4.43j0Q Return Loss — 24.50B General Antenna Parameters and Design Electrical Delay (one direction) 1.031 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Certificate No: Z16—97232 Page 4 of 8

%L In Collaboration with 4 2 $ P e a 4. CAUBRA'I'IONLABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Http:/www.chinattl.cn DASY5 Validation Report for Head TSL Date: 11.24.2016 Test Laboratory: CTTL, Beijing, China DUT : Dipole 2600 MHz; Type: D2600V2; Serial: D2600V2 — SN: 1061 Communication System: UID 0, CW; Frequency: 2600 MHz; Duty Cycle: 1: 1 Medium parameters used: £= 2600 MHz; 0 = 1.941 S/m; sr = 38.28; p = 1000 kg/m3 Phantom section: Center Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C€63.19—2007) DASY5 Configuration: e Probe: EX3DV4 — SN7433; ConvF(7.19, 7.19, 7.19); Calibrated: 9/26/2016; e Sensor—Surface: 2mm (Mechanical Surface Detection) e Electronics: DAF4 Sn771; Calibrated: 2/2/2016 e Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1161/1 e Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372) Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 107.1 V/m; Power Drift =—0.00 dB Peak SAR (extrapolated) = 28.8 W/kg SAR(I1 g) = 14 W/kg; SAR(10 g) = 6.41 W/kg Maximum value of SAR (measured) =21.4 W/kg dB 0 —4.46 —8.92 —13.38 —17.84 —22.30 0 dB = 21.4 W/kg = 13.30 dBW/kg Certificate No: Z16—97232 Page 5 of 8

@7TJ a In Collaboration with Comel B3 e _2 CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hittp:/www.chinattl.cn Impedance Measurement Plot for Head TSL Tri s1i1l Log Mag 10.00d8/ ref 0.000d8 [F1] °00 136000000 onz —25. 331 ds 40. 00 30. 00 20. 00 10. 00 0. 000 p) <€ —10. 00 i —20. 00 —30. 00 —40. 00 —50. 00 k >PM@@é s11 smith (R+jX) scale 1.000U [F1 Del] »1 2.6000000 cHz 50.120 o —5.4242 o 11.28 1 Start 2.4 GHz _ (AIFBW 100 Hz . Stop 2.8GHz [eei®I|| Certificate No: Z16—97232 Page 6 of 8

A' In Collaboration with m‘/"/"J, s p e a g uy CALIBRATIONLABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Http:/www.chinattl.en DASY5 Validation Report for Body TSL Date: 11.24.2016 Test Laboratory: CTTL, Beijing, China DUT : Dipole 2600 MHz; Type: D2600V2; Serial: D2600V2 — SN: 1061 Communication System: UID 0, CW; Frequency: 2600 MHz; Duty Cycle: 1:1 Medium parameters used: f = 2600 MHz; 0 = 2.173 S/m; s, = 52.13; p = 1000 kg/m* Phantom section: Left Section Measurement Standard: DASYS5 (IEEE/IEC/ANSI C63.19—2007) DASY5 Configuration: e Probe: EX3DV4 — SN7433; ConvF(7.22, 7.22,7.22); Calibrated: 9/26/2016; e Sensor—Surface: 2mm (Mechanical Surface Detection) e Electronics: DAF4 Sn771; Calibrated: 2/2/2016 e Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1161/1 e Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372) Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 100.6 V/m; Power Drift =—0.05 dB Peak SAR (extrapolated) =28.1 W/kg SAR(I g) =13.9 W/kg; SAR(10 g) =6.37 W/kg Maximum value of SAR (measured) =21.2 W/kg dB 0 —4.35 —8.69 —13.04 —17.38 L. —21.13 0 dB = 21.2 W/kg = 13.26 dBW/kg Certificate No: Z16—97232 Page 7 of 8


Document Created: 2019-09-22 14:06:59
Document Modified: 2019-09-22 14:06:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC