User manual

FCC ID: 2AFZZ-RMSF6LH

Users Manual

Download: PDF
FCCID_4158571

啢貏忲梽〃藥⺸槪豈蹕鄘 旿誑䯤YYYYYYYYYY 穼梪䯤B 窹旿抰㫼䯒謖蠙䯓䯤G7!Mjuf!駱䃸慇攢!餚旝穼 Legal Information RF Exposure Information (SAR) Disclaimer This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device may be restricted for use, depending on local network. This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure This User Guide is published by Xiaomi or its local affiliated company. Improvements and changes to this User Guide necessitated by typographical errors, inaccuracies of current information, or 蹕鄘僨壉暀梕䯤312:妘12桸19暀 standard for wireless devices employs a unit of measurement improvements to programs and/or equipment, may be made by Xiaomi at Ensure the power adapter used meets the requirements of Clause 2.5 in known as the Specific Absorption Rate, or SAR. any time and without notice. Such changes will, however, be incorporated IEC60950-1/EN60950-1 and has been tested and approved according to The SAR limit set by the FCC is 1.6W/Kg. For body-worn operation, this into new editions of this User Guide. All illustrations are for illustration national or local standards. device has been tested and meets the FCC RF exposure guidelines for use purposes only and may not accurately depict the actual device. with an accessory that contains no metal and positions the device a Frequency Bands and Power minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the device at the ear, position 棞旿䯤 This mobile phone offers the following frequency bands in EU areas only the handset a minimum of 1.0 cm from your body when the device is and maximum radio-frequency power : switched on. GSM 900: 35 dBm GSM 1800: 32 dBm FCC Note UMTS band 1/8: 25 dBm LTE band 1/3/7/8/20/28/38/40: 25.7 dBm Bluetooth: 20 dBm Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 㳟趼俒裶櫎!216h!晹賂㿫 Wi-Fi 2.4 GHz band: 20 dBm 231nn E-label This device has an electronic label for certification information. FCC Regulations To access it, please select Settings> About Phone >Certification or select This mobile phone complies with part 15 of the FCC Rules. Operation is Settings, then type "Certification" into the search bar. subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Important Safety Information These limits are designed to provide reasonable protection against SAR 10g limit: 2.0W/Kg, SAR Value: Head: 0.577 W/Kg, harmful interference in a residential installation. Body: 1.251 W/Kg (5mm distance). This equipment generates, uses and can radiate radio frequency energy SAR 1g limit: 1.6W/Kg, SAR Value: Head: 1.07 W/Kg, and, if not installed and used in accordance with the instructions, may Body-worn: 0.71 W/Kg (10mm distance). cause harmful interference to radio communications. Hotspot: 0.90 W/Kg (10mm distance). However, there is no guarantee that interference will not occur in a particular installationi. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the Temperature: 0 °C - 40 °C interference by one or more of the following measures: Install the adapter near the device in an easily accessible position. - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. Model: M1810F6LH - Connect the equipment into an outlet on a circuit different from that to Manufacturer : Xiaomi Communications Co., Ltd. 1810 indicates the product will be launched after October, 2018 which the receiver is connected. Manufacturer postal address: The Rainbow City of Redmi 7 ▕梪酁椨墡頯䯤 - Consult the dealer or an experienced radio/TV technician for help. China Resources, NO.68, Qinghe Middle Street, Haidian District, Beijing, China 100085 Brand: Redmi Model: M1810F6LH User Guide All rights reserved by Xiaomi Inc. 000000000000-A 76nn 澐鑨闐熌 371nn Correctly dispose of this product. This marking indicates that this Thank you for choosing Redmi 7 Security notice Long press the power button to turn on the device. Follow the on-screen instructions to configure the device. product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse · Observe any law and rule which restricts using mobile phones in specific cases and environments. 浧賽鄡 紙鄡 of material resources. · Do not use your phone in petrol stations and explosive atmospheres and potentially To safely recycle your device, please use return and collection systems or contact explosive environments include fuelling areas, below decks on boats, fuel or the retailer where the device was originally purchased. chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your phone or other radio For more information For Environment Declaration, please refer to the link below: ▕梪棧獸墡頯䯤 http://www.mi.com/en/about/environment/ equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off “two-way radios” or “electronic devices” to avoid interfering Visit our official website: www.mi.com. with blasting operations. · Do not use your phone in the hospital operating rooms, emergency rooms, or intensive care units. Comply with the current rules and regulations of hospitals and CAUTION health centers. Please consult your doctor and the device manufacturer to Saturday, August 16 RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. determine if operation of your phone may interfere with the operation of your Volume MIUI DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS. medical device. To avoid potential interference with the pacemaker, maintain a Buttons separation of 15cm between the mobile phone and the pacemaker. To achieve this, Redmi 7 comes pre-installed with MIUI, our customised Android-based OS use the phone on the opposite ear to your pacemaker and do not carry it in a breast 豕頥 which pushes frequent updates and user-friendly features suggested by pocket. Do not use your phone near hearing aids, cochlear implants, etc., to avoid over 200 million active users worldwide. For more information, please visit To prevent possible hearing damage,do not listen at high volume levels interference with medical equipment. for long periods. · Respect aircraft safety regulations and turn off your phone on board the aircraft www.miui.com. Power For more important safety information, please refer to User Manual in the link below : when required. Button http://www.mi.com/en/certification/ · When driving a vehicle, use your phone in accordance with the relevant traffic laws and regulations. · To avoid lightning strike, do not use your phone outdoors during thunderstorms. Important safety information · Do not use your phone to make calls while it is charging. SIM Card Tray: · Read all the safety information below before using your device. · Do not use your phones in places with high humidity such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage. · Using unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks. Nano-SIM · Use only authorized accessories which are compatible with your device. Security notice This device’s operating temperature range is 0 °C~40 °C. Using this device in the Update your phone’s operating system using the built-in software update feature, or environments outside of this temperature range may damage the device. visit our authorized service outlets. Updating software through other means may · If your device is provided with a built-in battery, don’t attempt to replace the battery Nano-SIM damage the device or result in data loss, security issues, and other risks. yourself to avoid damaging the battery or the device. · Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter. · After charging is complete, disconnect the adapter from both the device and the Micro SD power outlet. Do not charge the device longer than 12 hours. EU Regulations · The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the RED Declaration of Conformity device, its battery and accessories according to the local regulations. We, Xiaomi Communications Co., Ltd., · Do not disassemble, hit, crush, or burn the battery. In case of deformation, stop using the battery immediately. Hereby, Xiaomi Communications Co., Ltd., declares that this GSM/GPRS/ - Do not short circuit the battery to avoid overheating, burns, or other personal EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth and WiFi M1810F6LH is in About Dual SIM: injuries. compliance with the essential requirements and other relevant provisions of the RE - Do not place the battery in the high-temperature environments. Directive 2014/53/EU. The full text of the EU declaration of conformity could be · Dual 4G SIM requires the support of local telecom operator services, and Overheating may cause explosion. consulted at www.mi.com/en/certification may not be available in all regions. - Do not disassemble, hit, or crush the battery to avoid battery leaks, overheating, or explosion. · Supports dual nano-SIM cards. When using both SIM card slots, either Body-worn SAR testing has been carried out at a separation distance - Do not burn the battery to avoid fire or explosion. of 5 mm . To meet RF exposure guidelines during body-worn operation, card can be set as the primary card. Qboupof!Dppm!Hsbz!9D - In case of deformation, stop using the battery immediately. the device should be positioned at least this distance away from the body. · Only certain regions and telecom operators support VoLTE. · Keep your device dry. If you are not using an approved accessory, ensure that whatever products used is · System updates may be applied when network optimization occurs. For · Do not try to repair the device yourself. If any part of the device does not work properly, free of any metal and that it positions the phone with the indicated distance away details, please refer to the system version in use on the device. contact Mi customer support or bring your device to an authorized repair center. USB Port from the body. · Connect other devices according to their instruction manuals. Do not connect Receiver Category 2 incompatible devices to this device. · For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible. 謾骼竑濇燍嶯鲇䎋䯤 辭姉縟旿誑䯖㛽辭姉縟樰懪㓇呯靕 ゔ擄 妛棧獸 叄鉢䯤Bsjbm!!4qu


Document Created: 2019-01-31 16:47:37
Document Modified: 2019-01-31 16:47:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC