User manual

FCC ID: 2AFZZ-RMSE7TG

Users Manual

Download: PDF
FCCID_3954641

Correctly dispose of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. Thank you for choosing Redmi Note 6 Pro To safely recycle your device, please use return and collection systems Long press the power button to turn on the device. or contact the retailer where the device was originally purchased. Follow the on-screen instructions to configure the device. For Environment Declaration, pls. refer to below link: http://www.mi.com/en/about/environment/ For more information CAUTION Visit our official website: www.mi.com RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Saturday, August 16 DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS. Volume To prevent possible hearing damage, Buttons do not listen at high volume levels for long periods. MIUI For more important safety information, pls. refer to User Manual in below Redmi Note 6 Pro is pre-loaded with MIUI, our customised link:http://www.mi.com/en/certification/ Android-based OS which pushes out frequent updates and Power user friendly features suggested by over 200 million active Important safety information Button users globally. Visit www.miui.com for more information. Read all the safety information below before using your device. Visit our official website: www.mi.com. Using unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks. Use only authorized accessories which are compatible with your device. This device’s operating temperature range is 0℃~40℃. Using this device in the environments outside of this temperature range may damage the device. SIM Card Tray： If your device is provided with a built-in battery, don’t attempt to replace the battery yourself to avoid damaging the battery or the device. Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter. Obop.TJN Obop.TJN After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device longer than 12 hours. The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose or recycle the device, its battery and accessories Obop.TJN Njdsp!TE according to the local regulations. Do not disassemble, hit, crush, or burn the battery. In case of deformation, stop using the battery immediately. - Do not short circuit the battery to avoid overheating, burns, or other personal injuries. - Do not place the battery in the high-temperature environments. Overheating may cause explosion. - Do not disassemble, hit, or crush the battery to avoid battery leaks, About Dual SIM: overheating, or explosion. . Dual 4G SIM requires the support of local telecom operator - Do not burn the battery to avoid fire or explosion. services, and may not be available in all regions. - In case of deformation, stop using the battery immediately. . Only certain regions and telecom operators support VoLTE. Keep your device dry. USB Port . System updates may be applied when network optimization Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an Redmi Note 6 Pro occurs. For details, please refer to the system version in use authorized repair center. on the device. Connect other devices according to their instruction manuals. Do not User Guide connect incompatible devices to this device. For AC/DC Adapter, the socket-outlet shall be installed near the equipment and shall be easily accessible. Body-worn SAR testing has been carried out at a separation This mobile phone has been tested and found to comply with the Important Safety Information Safety precautions distance of 5 mm .To meet RF exposure guidelines during limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. SAR 10g limit: 2.0 W/Kg, SAR Value: Head: 0.755 W/Kg, body-worn operation, the device should be positioned at least These limits are designed to provide reasonable protection against Follow relevant laws and regulations. Do not use your phone in the this distance away from the body. harmful interference in a residential installation. This equipment Body: 1.476 W/Kg (5mm distance). following environments. If you are not using an approved accessory ensure that whatever generates, uses and can radiated radio frequency energy and, if not SAR 1g limit: 1.6 W/Kg, SAR Value: Head: 0.75 W/Kg, Do not use your phone in a potentially explosive environments include products used is free of any metal and that it positions the phone installed and used in accordance with the instructions, may cause Body-worn: 0.78 W/Kg (10mm distance). fuelling areas, below decks on boats, fuel or chemical transfer or with the indicated distance away from the body. harmful interference to radio communications. However, there is no Hotspot: 1.14 W/Kg (10mm distance). storage facilities, areas where the air contains chemicals or particles, Receiver Category 2 guarantee that interference will not occur in a particular installation If such as grain, dust, or metal powders. Obey all posted signs to turn off this equipment does cause harmful interference to radio or television wireless devices such as your phone or other radio equipment. Do not use your phone in the hospital operating rooms, emergency reception, which can be determined by turning the equipment off and Temperature: 0 °C - 40 °C on, the user is encouraged to try to correct the interference by one or rooms, or intensive care units.Please consult your doctor and the Legal Information more of the following measures: Install the adapter near the device in an easily device manufacturer to determine if operation of your phone may -Reorient or relocate the receiving antenna. accessible position. interfere with the operation of your medical device.To avoid potential This device may be operated in all member states of the EU. -Increase the separation between the equipment and receiver. Model: M1806E7TG interference with the pacemaker.keep a minimum separation of 15 cm Observe national and local regulations where the device is used. -Connect the equipment into an outlet on a circuit different from that 1806 indicate the date of putting the product on the market is 201806 be maintained between the mobile phone and the pacemaker . To This device is restricted to indoor use only when operating in 5150 to which the receiver is connected. achieve this use the phone on the opposite ear to your pacemaker to 5350Mhz frequency range in following countries : -Consult the dealer or an experienced radio/TV technician for help. and do not carry it in a breast pocket.Do not use your phone near hearing aids, cochlear implants, etc to avoid interference with AT BE BG HR CY CZ DK medical equipment. EE FI FR DE EL HU IE Respect aircraft safety regulations and turn off your phone on board IT LV LT LU MT NL PL RF Exposure Information (SAR) the aircraft when required. 内页 PT RO SK SI ES SE UK This device meets the government’s requirements for exposure to When driving a vehicle, use your phone in accordance with the radio waves. This device is designed and manufactured not to exceed relevant traffic laws and regulations. the emission limits for exposure to radio frequency (RF) energy. The To avoid lightning strike, do not use your phone outdoors during Ensure the power adapter used meets the requirements of Clause 2.5 exposure standard for wireless device employs a unit of measurement thunderstorms. in IEC60950-1/EN60950-1 and has been tested and approved known as the Specific Absorption Rate, or SAR. Do not use your phone to make calls while it is charging. Do not use your phones in places with high humidity such as bathrooms. Doing so may result in electric shock, injury, fire, and according to national or local standards. Manufacturer : The SAR limit set by the FCC is 1.6W/Kg. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for 金东太空梭 128g 无光铜，正背哑油 use with an accessory that contains no metal and be positioned a charger damage. The Rainbow City of China Resources, NO.68, Qinghe Middle minimum of 1.0 cm from the body. Use of other accessories may not Observe any rules which restrict using mobile phones in specific cases and environments. Street, Haidian District, Beijing, China 100085 ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the device at the ear, 288x156mm position the handset a minimum of 1.0 cm from your body when the Security notice Frequency Bands and Power device is switched on. 单页72x156mm Update your phone’s operating system using the built-in software This mobile phone offers the following frequency bands in EU areas update feature, or visit our authorized service outlets. Updating only and maximum radio-frequency power： software through other means may damage the device or result in data GSM 900: 35 dBm loss, security issues, and other risks. GSM 1800: 32 dBm FCC Note UMTS band 1/8: 25 dBm Changes or modifications not expressly approved by the party EU Regulations LTE band 1/3/7/8/20/38/40: 25.7 dBm Bluetooth: 20 dBm Wi-Fi 2.4 GHz band: 20 dBm responsible for compliance could void the user's authority to operate the equipment. Pantone Cool Gray 8C Wi-Fi 5 GHz band: 20 dBm RED Declaration of Conformity We, Xiaomi Communications Co., Ltd. Hereby, Xiaomi Communications Co., Ltd. declares that this GSM/GPRS/ Pantone Cool 1505C EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth and WiFi FCC Regulations E-label M1806E7TG is in compliance with the essential requirements and other This mobile phone complies with part 15 of the FCC Rules. Operation is This device has an electronic label for certification information. relevant provisions of the RE Directive 2014/53/EU.The full text of the EU subject to the following two conditions: (1)This device may not cause To access it , please select Settings> About Phone >Verification Xiaomi Communications Co., Ltd. declaration of conformity could be consulted at www.mi.com/en/ harmful interference, and (2)this device must accept any interference or select Setting, then type "Verification " into the search bar. Brand: MI Model: M1806E7TG certification received, including anterference that may cause undesired operation. All rights reserved by Xiaomi Inc. 000000000000-A 填写料号，并生成条码，条码为料号加版本，扫描后为数字后紧跟版本，不需要分割线


Document Created: 2019-03-23 16:23:59
Document Modified: 2019-03-23 16:23:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC