User manual

FCC ID: 2AFZZ-RMSE6G

Users Manual

Download: PDF
FCCID_3810273

Thank you for choosing Redmi S2 Long press the power button to turn on the device. Follow the on-screen instructions to configure the device. For more information Visit our official website: www.mi.com Saturday, August 16 Volume MIUI Buttons Redmi S2 is pre-loaded with MIUI, our customised Android-based OS which pushes out frequent updates and user friendly features suggested by over 200 million active Power users globally. Visit www.miui.com for more information. Button SIM Card Tray： Obop.TJN Obop.TJN Njdsp!TE About Dual SIM: Two 4G networks cannot be used simultaneously. When 2 SIM cards are in use, one SIM will offer 4G/3G/2G while the other will offer only 3G/2G. USB Port Redmi S2 User Guide Correctly dispose of this product. This marking indicates that this product Do not use your phone in the hospital operating rooms, emergency rooms, or FCC Regulations should not be disposed with other household wastes throughout the EU. intensive care units.Please consult your doctor and the device manufacturer to To prevent possible harm to the environment or human health from determine if operation of your phone may interfere with the operation of your This mobile phone complies with part 15 of the FCC Rules. Operation is subject to uncontrolled waste disposal, recycle responsibly to promote the medical device.To avoid potential interference with the pacemaker.keep a the following two conditions: (1)This device may not cause harmful interference, sustainable reuse of material resources. minimum separation of 15 cm be maintained between the mobile phone and the and (2)this device must accept any interference received, including anterference To safely recycle your device, please use return and collection systems or contact pacemaker . To achieve this use the phone on the opposite ear to your that may cause undesired operation.This mobile phone has been tested and found the retailer where the device was originally purchased. pacemaker and do not carry it in a breast pocket.Do not use your phone near to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC hearing aids, cochlear implants, etc to avoid interference with medical Rules. These limits are designed to provide reasonable protection against harmful For Environment Declaration, pls. refer to below link: equipment. interference in a residential installation. This equipment generates, uses and can http://www.mi.com/en/about/environment/ Respect aircraft safety regulations and turn off your phone on board the aircraft radiated radio frequency energy and, if not installed and used in accordance with when required. the instructions, may cause harmful interference to radio communications. When driving a vehicle, use your phone in accordance with the relevant traffic However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television CAUTION laws and regulations. reception, which can be determined by turning the equipment off and on, the user To avoid lightning strike, do not use your phone outdoors during thunderstorms. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Do not use your phone to make calls while it is charging. is encouraged to try to correct the interference by one or more of the following DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS. Do not use your phones in places with high humidity such as bathrooms. Doing measures: so may result in electric shock, injury, fire, and charger damage. -Reorient or relocate the receiving antenna. Observe any rules which restrict using mobile phones in specific cases and -Increase the separation between the equipment and receiver. To prevent possible hearing damage, -Connect the equipment into an outlet on a circuit different from that do not listen at high volume levels for long periods. environments. to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. For more important safety information, pls. refer to User Manual in below Security notice link:http://www.mi.com/en/certification/ Update your phone’s operating system using the built-in software update feature, or visit our authorized service outlets. Updating software through other means RF Exposure Information (SAR) Important safety information may damage the device or result in data loss, security issues, and other risks. This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for Read all the safety information below before using your device. exposure to radio frequency (RF) energy. The exposure standard for wireless Using unauthorized cables, power adapters, or batteries can cause fire, device employs a unit of measurement known as the Specific Absorption Rate, explosion, or pose other risks. EU Regulations or SAR.The SAR limit set by the FCC is 1.6W/Kg. For body worn operation, this Use only authorized accessories which are compatible with your device. device has been tested and meets the FCC RF exposure guidelines for use with This device’s operating temperature range is 0℃~40℃. Using this device in the RED Declaration of Conformity an accessory that contains no metal and be positioned a minimum of 1.0 cm from environments outside of this temperature range may damage the device. the body. Use of other accessories may not ensure compliance with FCC RF If your device is provided with a built-in battery, don’t attempt to replace the We, Xiaomi Communications Co., Ltd. exposure guidelines. If you do not use a body-worn accessory and are not holding battery yourself to avoid damaging the battery or the device. the device at the ear, position the handset a minimum of 1.0 cm from your body Charge this device only with the included or authorized cable and power adapter. Hereby, Xiaomi Communications Co., Ltd. declares that this GSM/GPRS/EDGE/ when the device is switched on. Using other adapters may cause fire, electric shock, and damage the device and UMTS/LTE Digital Mobile Phone with Bluetooth and WiFi M1803E6G is in the adapter. After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device longer than 12 hours. compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU.The full text of the EU declaration of conformity could be consulted at www.mi.com/en/certification FCC Note Changes or modifications not expressly approved by the party responsible for 内页 The battery must be recycled or disposed of separately from household waste. Body-worn SAR testing has been carried out at a separation distance of 5 mm . compliance could void the user's authority to operate the equipment. Mishandling the battery may cause fire or explosion. Dispose or recycle the To meet RF exposure guidelines during body-worn operation, the device should 金东太空梭 128g 无光铜，正背哑油 device, its battery and accessories according to the local regulations. be positioned at least this distance away from the body. If you are not using an Do not disassemble, hit, crush, or burn the battery. In case of deformation, stop approved accessory ensure that whatever products used is free of any metal and using the battery immediately. that it positions the phone with the indicated distance away from the body. E-label - Do not short circuit the battery to avoid overheating, burns, or other personal Receiver Category 2 This device has an electronic label for certification information. To access it , injuries. please select Settings> About Phone >Verification or select Setting, then type 225x158mm - Do not place the battery in the high-temperature environments. Overheating "Verification " into the search bar. may cause explosion. Legal Information - Do not disassemble, hit, or crush the battery to avoid battery leaks, overheating, or explosion. This device may be operated in all member states of the EU. Important Safety Information - Do not burn the battery to avoid fire or explosion. - In case of deformation, stop using the battery immediately. Keep your device dry. Observe national and local regulations where the device is used. This device may be restricted for use, depending on local network. Ensure the power adapter used meets the requirements of Clause 2.5 in SAR 10g limit: 2.0W/Kg, SAR Value: Head: 0.429 W/Kg, Body: 1.577 W/Kg (5mm distance). SAR 1g limit: 1.6W/Kg, SAR Value: Head: 0.89 W/Kg, 单页75x158mm Do not try to repair the device yourself. If any part of the device does not work Body-worn: 1.43 W/Kg (10mm distance). properly, contact Mi customer support or bring your device to an authorized IEC60950-1/EN60950-1 and has been tested and approved according to national Hotspot: 1.43 W/Kg (10mm distance). repair center. or local standards. Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device. For AC/DC Adapter, the socket-outlet shall be installed near the equipment and shall be easily accessible. Manufacturer : The Rainbow City of China Resources, NO.68, Qinghe Middle Street, Haidian District, Beijing, China 100085 Temperature: 0 °C - 40 °C Install the adapter near the device in an easily accessible position. Pantone Cool Gray 8C Model: M1803E6G Frequency Bands and Power 1803 indicate the date of putting the product on the market is 201803 Safety precautions Follow relevant laws and regulations. Do not use your phone in the following This mobile phone offers the following frequency bands in EU areas only and maximum radio-frequency power： Pantone Cool 1505C environments. GSM 900：35 dBm Do not use your phone in a potentially explosive environments include fuelling GSM 1800：32 dBm areas, below decks on boats, fuel or chemical transfer or storage facilities, areas UMTS band 1/8：25 dBm Xiaomi Communications Co., Ltd. where the air contains chemicals or particles, such as grain, dust, or metal LTE band 1/3/7/8/20/38/40：25.7 dBm powders. Obey all posted signs to turn off wireless devices such as your phone Bluetooth：20 dBm Brand：MI Model: M1803E6G 填写料号，并生成条码，条码为料号加版本，扫描后为数字后紧跟版本，不需要分割线 or other radio equipment. Wi-Fi 2.4 GHz band ：20 dBm All rights reserved by Xiaomi Inc. 000000000000-A


Document Created: 2019-03-27 08:53:07
Document Modified: 2019-03-27 08:53:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC