User manual

FCC ID: 2AFZZ-RMSDG1

Users Manual

Download: PDF
FCCID_3660774

餚旝䯙漥㓇䯙䒮珜!!!駱䃸慇攢!㬦羮 Thank you for choosing Redmi 5 Long press the power button to switch on the device. Follow the on-screen instructions to configure the device. For more information Visit our official website: www.mi.com Saturday, August 16 Volume Buttons MIUI Redmi 5 comes pre-installed with MIUI, our customised Android-based OS which pushes frequent updates and user- friendly features suggested by over 200 million active users Power worldwide. For more information, please visit www.miui.com. Button SIM Card Tray： Redmi 5 Tray 1 supports Nano-SIM card; Tray 2 supports Nano-SIM card or Micro SD card. Usbz!2 Usbz!3 Obop.TJN Obop.TJN Obop.TJN Njdsp!TE About Dual SIM: When 2 SIM cards are in use, one SIM will offer 4G/3G/2G USB Port while the other will offer only 3G/2G. Correctly dispose of this product. This marking indicates that Frequency Bands and Power FCC Note: this product should not be disposed with other household wastes throughout the EU. This mobile phone offers the following frequency bands in EU areas Changes or modifications not expressly approved by the party To prevent possible harm to the environment or human health only and maximum radio-frequency power： responsible for compliance could void the user's authority to operate from uncontrolled waste disposal, recycle responsibly to promote the equipment. GSM 900：35 dBm the sustainable reuse of material resources. GSM 1800：32 dBm To safely recycle your device, please use return and collection systems UMTS band 1/8：25 dBm or contact the retailer where the device was originally purchased. E-label： LTE band 1/3/7/8/20/38/40：25.7 dBm Bluetooth：< 20 dBm This device has an electronic label for certification information, For Environment Declaration, pls. refer to below link: to access it , please select Settings> About Phone >Verification http://www.mi.com/en/about/environment/ Wi-Fi 2.4 GHz band < 20 dBm or select Setting, then type "Verification" into the search bar. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. FCC Regulations Important Safety Information DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS. This mobile phone complies with part 15 of the FCC Rules. Operation is SAR 10g limit: 2.0W/Kg, SAR Value: Head: 0.529 W/Kg, subject to the following two conditions: (1)This device may not cause Body: 1.527 W/Kg (5mm distance). To prevent possible hearing damage, harmful interference, and (2)this device must accept any interference SAR 1g limit: 1.6W/Kg, SAR Value: Head: 0.550 W/Kg, do not listen at high volume levels for long periods. received, including anterference that may cause undesired operation. Body-worn: 1.375 W/Kg (10mm distance). Hotspot: 1.444 W/Kg (10mm distance). For important safety information, pls. refer to User Manual in below link: This mobile phone has been tested and found to comply with the http://www.mi.com/en/certification/ limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against Temperature: 0 °C - 40 °C EU Regulations harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not Install the adapter near the device in an easily accessible position. RED Declaration of Conformity installed and used in accordance with the instructions, may cause We, Xiaomi Communications Co., Ltd. harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television Hereby, Xiaomi Communications Co., Ltd. declares that this reception, which can be determined by turning the equipment off and GSM/GPRS/EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth on, the user is encouraged to try to correct the interference by one or and WiFi MDG1 is in compliance with the essential requirements more of the following measures: and other relevant provisions of the RE Directive 2014/53/EU. The declaration of conformity could be consulted at www.mi.com/en/certification -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. Body-worn SAR testing has been carried out at a separation -Connect the equipment into an outlet on a circuit different from that distance of 5 mm . To meet RF exposure guidelines during to which the receiver is connected. body-worn operation, the device should be positioned at least -Consult the dealer or an experienced radio/TV technician for help. this distance away from the body. If you are not using an approved accessory ensure that whatever products used is free of any metal and that it positions the phone with the indicated distance away from the body. RF Exposure Information (SAR) Receiver Category 2 This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed Legal Information the emission limits for exposure to radio frequency (RF) energy. The This device may be operated in all member states of the EU. exposure standard for wireless device employs a unit of measurement Observe national and local regulations where the device is used. known as the Specific Absorption Rate, or SAR. This device may be restricted for use, depending on local network. The SAR limit set by the FCC is 1.6W/Kg. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for Ensure the power adapter used meets the requirements of Clause 2.5 use with an accessory that contains no metal and be positioned a in IEC60950-1/EN60950-1 and has been tested and approved minimum of 1.0 cm from the body. Use of other accessories may not according to national or local standards. ensure compliance with FCC RF exposure guidelines. If you do not use Manufacturer : a body-worn accessory and are not holding the device at the ear, Xiaomi Communications Co., Ltd. The Rainbow City of China Resources, NO.68, Qinghe Middle position the handset a minimum of 1.0 cm from your body when the Model: MDG1 Street, Haidian District, Beijing, China 100085 device is switched on. All rights reserved by Xiaomi Inc. 000000000000-A 填写料号，并生成条码，条码为料加版本，扫描后为数字后紧跟版本，不需要分割线


Document Created: 2017-11-22 09:33:11
Document Modified: 2017-11-22 09:33:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC