User manual

FCC ID: 2AFZZ-RMSC3GH

Users Manual

Download: PDF
FCCID_4097812

啢貏忲梽〃藥⺸槪豈蹕鄘 旿誑䯤YYYYYYYYYYYY 穼梪䯤B 窹旿抰㫼䯒謖蠙䯓䯤D4H!駱䃸慇攢!餚旝穼 Legal Information RF Exposure Information (SAR) This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device may be restricted for use, depending on local network. This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure 蹕鄘僨壉暀梕䯤3129妘YY桸YY暀 standard for wireless device employs a unit of measurement Ensure the power adapter used meets the requirements of Clause 2.5 in known as the Specific Absorption Rate, or SAR. IEC60950-1/EN60950-1 and has been tested and approved according to The SAR limit set by the FCC is 1.6W/Kg. For body worn operation, this national or local standards. device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and be positioned a minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory 棞旿䯤 Frequency Bands and Power and are not holding the device at the ear, position the handset a minimum of 1.0 cm from your body when the device is switched on. This mobile phone offers the following frequency bands in EU areas only and maximum radio-frequency power : GSM 900: 35 dBm FCC Note 㳟趼俒裶櫎!216h!晹賂㿫 GSM 1800: 32 dBm UMTS band 1/8: 25 dBm Changes or modifications not expressly approved by the party responsible LTE band 1/3/7/8/28/38/40: 25.7 dBm for compliance could void the user's authority to operate the equipment. Bluetooth: 20 dBm Wi-Fi 2.4 GHz band: 20 dBm 231nn E-label FCC Regulations This device has an electronic label for certification information. This mobile phone complies with part 15 of the FCC Rules. Operation is To access it , please select Settings> About Phone >Regulatory labels or subject to the following two conditions: (1)This device may not cause select Settings, then type "Regulatory labels" into the search bar. harmful interference, and (2)this device must accept any interference received, including anterference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Important Safety Information This equipment generates, uses and can radiated radio frequency energy SAR 10g limit: 2.0W/Kg, SAR Value: Head: 0.579 W/Kg, and, if not installed and used in accordance with the instructions, may Body: 1.497 W/Kg (5mm distance). cause harmful interference to radio communications. SAR 1g limit: 1.6W/Kg, SAR Value: Head: 0.98 W/Kg, Body-worn: 1.18 W/Kg (10mm distance). Hotspot: 1.18 W/Kg (10mm distance). However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Temperature: 0 °C - 40 °C - Reorient or relocate the receiving antenna. Install the adapter near the device in an easily accessible position. Manufacturer : Xiaomi Communications Co., Ltd. - Increase the separation between the equipment and receiver. Manufacturer postal address: The Rainbow City of - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Model: M1903C3GH 1903 indicate the date of putting the product on the market is 201903 China Resources, NO.68, Qinghe Middle Street, Haidian District, Beijing, China 100085 Brand: MI Model: M1903C3GH Redmi Go User Guide ▕梪酁椨墡頯䯤 All rights reserved by Xiaomi Inc. 000000000000-A 76nn 澐鑨闐熌 371nn Correctly dispose of this product. This marking indicates that this Security notice product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from · Observe any laws and rules which restrict using mobile phones in specific cases and environments. 浧賽鄡 紙鄡 Thank you for choosing Redmi Go uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. · Do not use your phone in petrol stations and explosive atmospheres and potentially To safely recycle your device, please use return and collection systems or contact explosive environments include fuelling areas, below decks on boats, fuel or Long press the power button to turn on the device. chemical transfer or storage facilities, areas where the air contains chemicals or the retailer where the device was originally purchased. Follow the on-screen instructions to configure the device. particles, such as grain, dust, or metal powders. For Environment Declaration, pls. refer to below link: Obey all posted signs to turn off wireless devices such as your phone or other radio ▕梪棧獸墡頯䯤 http://www.mi.com/en/about/environment/ equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off “two-way radios” or “electronic devices” to avoid interfering with blasting operations.” For more information CAUTION · Do not use your phone in the hospital operating rooms, emergency rooms, or intensive care units.Comply with the current rules and regulations of hospitals and Visit our official website: www.mi.com RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. health centers.Please consult your doctor and the device manufacturer to DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS. determine if operation of your phone may interfere with the operation of your Saturday, August 16 Volume medical device.To avoid potential interference with the pacemaker, keep a minimum Buttons separation of 15 cm be maintained between the mobile phone and the pacemaker . To prevent possible hearing damage, do not listen at high volume levels To achieve this, use the phone on the opposite ear to your pacemaker and do not Android (Go edition) Say hello to Android Go on your new Redmi Go. for long periods. For more important safety information, pls. refer to User Manual in below link:http://www.mi.com/en/certification/ carry it in a breast pocket.Do not use your phone near hearing aids, cochlear implants, etc., to avoid interference with medical equipment. · Respect aircraft safety regulations and turn off your phone on board the aircraft when required. 豕頥 Power A powerful experience for entry-level smartphones. It's the best of · When driving a vehicle, use your phone in accordance with the relevant traffic laws Button Android, built with new and reimagined apps, so even the most Important safety information and regulations. affordable Android smartphones present the optimum experience. · To avoid lightning strike, do not use your phone outdoors duringthunderstorms. · Read all the safety information below before using your device. · Do not use your phone to make calls while it is charging. · Using unauthorized cables, power adapters, or batteries can cause fire, · Do not use your phones in places with high humidity such as bathrooms. explosion, or pose other risks. Doing so may result in electric shock, injury, fire, and charger damage. · Use only authorized accessories which are compatible with your device. This device’s operating temperature range is 0 °C~40 °C. Using this device in the SIM Card Tray: environments outside of this temperature range may damage the device. Security notice · If your device is provided with a built-in battery, don’t attempt to replace the battery yourself to avoid damaging the battery or the device. Update your phone’s operating system using the built-in software pdate feature, or · Charge this device only with the included or authorized cable and power adapter. visit our authorized service outlets. Updating software through other means may Using other adapters may cause fire, electric shock, and damage the device and the damage the device or result in data loss, security issues, and other risks. Nano-SIM adapter. · After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device longer than 12 hours. · The battery must be recycled or disposed of separately from household waste. Nano-SIM Micro SD Mishandling the battery may cause fire or explosion. Dispose or recycle the device, EU Regulations its battery and accessories according to the local regulations. · Do not disassemble, hit, crush, or burn the battery. In case of deformation, stop RED Declaration of Conformity using the battery immediately. We, Xiaomi Communications Co., Ltd. , - Do not short circuit the battery to avoid overheating, burns, or other personal Hereby, Xiaomi Communications Co., Ltd., declares that this GSM/GPRS/ injuries. EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth and WiFi M1903C3GH is in - Do not place the battery in the high-temperature environments. compliance with the essential requirements and other relevant provisions of the RE About Dual SIM: Overheating may cause explosion. - Do not disassemble, hit, or crush the battery to avoid battery leaks, Directive 2014/53/EU. The full text of the EU declaration of conformity could be consulted at · Two 4G networks cannot be used simultaneously. overheating, or explosion. www.mi.com/en/certification - Do not burn the battery to avoid fire or explosion. · When 2 SIM cards are in use, one SIM will offer 4G/3G/2G while the other - In case of deformation, stop using the battery immediately. will offer only 3G/2G. Qboupof!Dppm!Hsbz!9D · Keep your device dry. Body-worn SAR testing has been carried out at a separation distance · Do not try to repair the device yourself. If any part of the device does not work of 5 mm .To meet RF exposure guidelines during body-worn operation, properly, contact Mi customer support or bring your device to an authorized repair the device should be positioned at least this distance away from the body. USB Port center. If you are not using an approved accessory ensure that whatever products used is · Connect other devices according to their instruction manuals. Do not connect free of any metal and that it positions the phone with the indicated distance away incompatible devices to this device. from the body. · For AC/DC Adapter, the socket-outlet shall be installed near the equipment and Receiver Category 2 shall be easily accessible. 謾骼竑濇燍嶯鲇䎋䯤 辭姉縟旿誑䯖㛽辭姉縟樰懪㓇呯靕 ゔ擄 妛棧獸 叄鉢䯤Bsjbm!!4qu


Document Created: 2019-06-11 14:27:07
Document Modified: 2019-06-11 14:27:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC