User Manual

FCC ID: 2AFZZ-MDY10EP

Users Manual

Download: PDF
FCCID_4178320

啢貏忲梽〃藥⺸槪豈蹕鄘 旿誑䯤196.V12I.1165 穼梪䯤B 窹旿抰㫼䯒謖蠙䯓䯤晹鄡擄!駱䃸慇攢!餚旝 蹕鄘僨壉暀梕䯤312:妘12桸3:暀 棞旿䯤 FCC Regulations This Mi Wireless Charger complies with part 15 of the FCC Rules. Operation is subject to the Safety precautions following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including anterference that may cause Follow relevant laws and regulations. Do not use your device in the following environments. undesired operation. This Mi Wireless Charger has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide Do not use your device in a potentially explosive environments include fuelling areas, below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Obey all posted signs to turn off 㳟趼俒裶櫎!239h!晹賂㿫 reasonable protection against harmful interference in a residential installation. This equipment wireless devices such as your device or other radio equipment. generates, uses and can radiated radio frequency energy and, if not installed and used in Do not use your device in the hospital operating rooms, emergency rooms, or intensive care accordance with the instructions, may cause harmful interference to radio communications. units.Please consult your doctor and the device manufacturer to determine if operation of your However, there is no guarantee that interference will not occur in a particular installation If this device may interfere with the operation of your medical device.To avoid potential interference equipment does cause harmful interference to radio or television reception, which can be with the pacemaker.keep a minimum separation of 15 cm be maintained between the device determined by turning the equipment off and on, the user is encouraged to try to correct the and the pacemaker . To achieve this use the device on the opposite ear to your pacemaker and interference by one or more of the following measures: do not carry it in a breast pocket.Do not use your device near hearing aids, cochlear implants, -Reorient or relocate the receiving antenna. etc to avoid interference with medical equipment. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is Do not use your devices in places with high humidity such as bathrooms. Doing so may result in connected. electric shock, injury, fire, and charger damage. -Consult the dealer or an experienced radio/TV technician for help. Observe any rules which restrict using wireless charger in specific cases and environments. FCC Note Temperature: 0 °C - 35 °C Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Important safety information Read all the safety information below before using your device. Use only authorized accessories which are compatible with your device. This device’s operating temperature range is 0℃~35℃. Using this device in the environments outside of this temperature range may damage the device. After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device longer than 12 hours. Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center. Manufacturer : Xiaomi Communications Co., Ltd. Manufacturer postal address: The Rainbow City of ▕梪酁椨墡頯䯤 China Resources, NO.68, Qinghe Middle Street, Connect other devices according to their instruction manuals. Do not connect incompatible Haidian District, Beijing, China 100085 Nj!Xjsfmftt!Dibshfs devices to this device. For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall Brand: MI Model: MDY-10-EP FCC ID: 2AFZZ-MDY10EP Rvjdl!tubsu!hvjef 澐鑨闐熌 be easily accessible. All rights reserved by Xiaomi Inc. XXX-XXXX-XXXX-A 悈訕昷媀䯤 藥宆悈 MFE!Joejdbups!Mjhiu Correct disposal Using the Wireless Charger + Efwjdf!po;!Gmbtift!uisff!ujnft Correctly dispose of this product. This marking indicates that this product should not + Tuboecz!npef;!Pgg Connect a charger to the wireless charger, then place a mobile device which meets the QI be disposed with other household wastes throughout the EU. To prevent possible wireless charging standard onto the wireless charger. harm to the environment or human health from uncontrolled waste disposal, recycle + Usbotgfssjoh!qpxfs;!Tpmje responsibly to promote the sustainable reuse of material resources. To safely recycle your 浧賽鄡 After the mobile device is done charging, remove it from the wireless charger. + + Qspufdujpo!npef;!Gmbtijoh Fssps;!Gmbtijoh May only be used with approved Mi chargers (QC 2.0, QC 3.0, and PD chargers) device, please use return and collection systems or contact the retailer where the device was originally purchased. 紙鄡 Never place items such as metal objects, magnets, or magnetic stripe cards between a mobile device and the wireless charger, as this could prevent the device from charging For indoor use only properly or cause damage from overheating. To identify electrical equipment designed primarily for indoor use. Charger should be securely plugged into an electrical outlet when charging. A mobile device may not charge properly depending on where its wireless charging coil is Direct current To indicate on the rating plate that the equipment is suitable for direct current only; ▕梪棧獸墡頯䯤 located. to identify relevant terminals. Wireless charging may not work properly if a mobile device is enclosed in a thick protective case. If a mobile device has a thick protective case, remove it before placing the device onto the wireless charger. VTC!Uzqf.D!qpsu If a mobile device is placed onto the wireless charger while connected to earphones, it may prevent the device from charging. EU Regulations 豕頥 RED Declaration of Conformity Fast wireless charging We, Xiaomi Communications Co., Ltd. To begin fast wireless charging, place a Mi phone which supports fast wireless charging onto the wireless charger. For more details, please refer to the User Manual. Hereby, Xiaomi Communications Co., Ltd. declares that this Mi Wireless Charger with Qi MDY-10-EP is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU.The full text of the EU declaration of conformity Note: Only approved Mi chargers that support fast charging (27W QC 3.0 chargers and could be consulted at www.mi.com/en/certification 18W QC 3.0 chargers) may be used. This product is QI certified by the Wireless Power Consortium (WPC), which means it is able to Frequency Bands and Power charge other WPC certified products. However, please note that variations in certain products This Mi Wireless Charger offers the following frequency bands in EU areas only and maximum may cause them to have reduced charging efficiency compared to Mi brand products. radio-frequency power： Qi : 110~145Khz : 2.93dBuA/m at 10 m Distance ｖ ｗ Qboupof!Dppm!Hsbz!9D 謾骼竑濇燍嶯鲇䎋䯤 辭姉縟旿誑䯖㛽辭姉縟樰懪㓇呯靕 ゔ擄 妛棧獸 叄鉢䯤Bsjbm!!4qu


Document Created: 2019-01-29 12:08:58
Document Modified: 2019-01-29 12:08:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC