Test Report

FCC ID: 2AFWN-SLG-CS101

Test Report

Download: PDF
FCCID_3833012

TEST REPORT CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (1) / (28) Pages Fax: +82-31-624-9501 1. Client ◦ Name : SOLUM CO.,LTD. ◦ Address : 4,5,6th F, 357, Guseong-ro, Giheung-gu, Gyeonggi-do, Yongin-si, Republic of Korea ◦ Date of Receipt : 2017-09-04 2. Manufacturer ◦ Name : SOLUM CO.,LTD. ◦ Address : 4,5,6th F, 357, Guseong-ro, Giheung-gu, Gyeonggi-do, Yongin-si, Republic of Korea 3. Use of Report : For FCC Certification 4. Test Sample / Model: Electronic Shelf Label Gateway / SLG-CS101 5. Date of Test : 2017-09-20 to 2018-04-24 6. Test Standard(method) used : FCC 47 CFR part 15 subpart C 15.249 7. Testing Environment: Temp.: (20 ± 5) ℃, Humidity: (51 ± 3) % R.H. 8. Test Results : Compliance The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This Test Report cannot be reproduced, except in full. Tested by Technical Manager Affirmation Bongseok, Kim: (Signature) Young-taek, Lee: (Signature) 2018-04-24 Republic of KOREA CTK Co., Ltd. CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (2) / (28) Pages Fax: +82-31-624-9501 REPORT REVISION HISTORY Date Revision Page No 2018-04-24 Issued (CTK-2018-01059) all This report shall not be reproduced except in full, without the written approval of CTK Co., Ltd. This document may be altered or revised by CTK Co., Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by CTK Co., Ltd. will constitute fraud and shall nullify the document. CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (3) / (28) Pages Fax: +82-31-624-9501 CONTENTS 1. General Product Description ....................................................................................... 4 1.1 Client Information ............................................................................................. 4 1.2 Product Information ........................................................................................... 4 1.3 Peripheral Devices ............................................................................................. 4 2. Facility and Accreditations.......................................................................................... 5 2.1 Test Facility ...................................................................................................... 5 2.2 Laboratory Accreditations and Listings .................................................................. 5 2.3 Calibration Details of Equipment Used for Measurement .......................................... 5 3. Test Specifications .................................................................................................... 6 3.1 Standards ........................................................................................................ 6 3.2 Mode of operation during the test ........................................................................ 7 3.3 Maximum Measurement Uncertainty .................................................................... 8 4. Technical Characteristic Test ....................................................................................... 9 4.1 Band Edge ....................................................................................................... 9 4.2 Field strength ................................................................................................. 12 APPENDIX A – Test Equipment Used For Tests ................................................................ 27 APPENDIX B – EUT Photographs ................................................................................... 28 CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (4) / (28) Pages Fax: +82-31-624-9501 1. General Product Description 1.1 Client Information Company SOLUM CO.,LTD. 4,5,6th F, 357, Guseong-ro, Giheung-gu, Gyeonggi-do, Yongin-si, Contact Point Republic of Korea Name : Kim Jun Young Contact Person E-mail : jy.kim1216@solu-m.com Tel : +82-31-8006-0960 1.2 Product Information FCC ID 2AFWN-SLG-CS101 Product Description Electronic Shelf Label Gateway Model name SLG-CS101 Variant Model name - Operating Frequency 902.4 MHz, 915.2 MHz, 927.6 MHz RF Output Power Below 94 dBuV/m @ 3 m Antenna A type : FPC antenna Antenna type Antenna B type : FPC antenna Antenna A : 3.9 dBi Antenna gain Antenna B : 3.9 dBi Channel Spacing 0.4 MHz Number of channels 64 Type of Modulation 2-GFSK Power Source DC 5 V, POE 1.3 Peripheral Devices Device Manufacturer Model No. Serial No. Notebook HP Inc. 15-BS563TU CND7253R6N AC Adapter HP Inc. HSTNN-LA40 PA-1450-36HC CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (5) / (28) Pages Fax: +82-31-624-9501 2. Facility and Accreditations 2.1 Test Facility The measurement facility is located at (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yong-in-si, Gyeonggi-do, Korea. 2.2 Laboratory Accreditations and Listings Registration Country Agency Scope of Accreditation Logo Number FCC Part 15 & 18 USA FCC 805871 EMI (Electromagnetic Interference / Emission) ISED CANADA ISED 8737A-2 EMI (3/10m test site) C-986 VCCI V-3 T-1843 JAPAN VCCI EMI (Electromagnetic Interference / Emission) R-3627 G-387 EMI (Electromagnetic Interference / Emission) KOREA MSIP KR0025 EMS (Electromagnetic Susceptibility / Immunity) 2.3 Calibration Details of Equipment Used for Measurement Test equipment and test accessories are calibrated on regular basis. The maximum time between calibrations is one year or what is recommended by the manufacturer, whichever is less. All test equipment calibrations are traceable to the Korea Research Institute of Standards and Science (KRISS), therefore, all test data recorded in this report is traceable to KRISS. CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (6) / (28) Pages Fax: +82-31-624-9501 3. Test Specifications 3.1 Standards FCC Part Status Requirement(s) Section(s) (Note 1) 15.249(a) Field Strength of emissions from intentional radiators C 15.249(d) Emissions radiated outside of the specified frequency bands C 15.209 Radiated Emissions C 15.207 AC Conducted Emission Line Conducted Note 1: C=Complies NC=Not Complies NT=Not Tested NA=Not Applicable Note 2: The data in this test report are traceable to the national or international standards. Note 3: The sample was tested according to the following specification: FCC Part 15.249, ANSI C63.10-2013. CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (7) / (28) Pages Fax: +82-31-624-9501 3.2 Mode of operation during the test The EUT is operated in a manner representative of the typical of the equipments. During at testing, system components were manipulated within the confines of typical usage to maximize each emission. All modulation modes were tests. The results are only attached worst cases. Test Frequency Lowest channel Middle channel Highest channel 902.4 MHz 915.2 MHz 927.6 MHz Test antenna Antenna 1 Antenna 2 ANT-A ANT-B Test mode TX mode Duty cycle* Continuous 0.13 (13%) *Duty cycle = TX on(time) / T(Period) = 6.5 ms / 50 ms = 0.13 CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (8) / (28) Pages Fax: +82-31-624-9501 3.3 Maximum Measurement Uncertainty The value of the measurement uncertainty for the measurement of each parameter. Coverage factor k = 2, Confidence levels of 95 % Description Uncertainty Conducted RF Output Power 1.5 dB Unwanted Emission(conducted) 3.0 dB Radiated Emissions (f ≤ 1 GHz) 4.0 dB Radiated Emissions (f > 1 GHz) 5.0 dB CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (9) / (28) Pages Fax: +82-31-624-9501 4. Technical Characteristic Test 4.1 Band Edge Requirement Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. Test Procedures(ANSI C63.10-2013 6.10) a) Connect the spectrum analyzer to the EUT using an appropriate RF cable connected to the EUT output. Configure the spectrum analyzer settings as described in step e) (be sure to enter all losses between the unlicensed wireless device output and the spectrum analyzer). b) Set the EUT to the lowest frequency channel (for the hopping on test, the hopping sequence shall include the lowest frequency channel). c) Set the EUT to operate at maximum output power and 100% duty cycle, or equivalent “normal mode of operation”. d) Perform the test as follows: 1) Span : Wide enough to capture the peak level of the emission operating on the channel closest to the band edge, as well as any modulation products that fall outside of the authorized band of operation. 2) RBW : 100 kHz 3) VBW : 300 kHz 4) Detector : Peak 5) Sweep time = Coupled 6) Trace : Max hold 7) Attenuation : Auto(at least 10 dB preferred) 8) Allow trace to fully stabilize e) Set the marker on the emission at the band edge, or on the highest modulation product outside of the band, if this level is greater than that at the band edge. Enable the marker- delta function, and then use the marker-to-peak function to move the marker to the peak of the in-band emission. f) Set the EUT to the highest frequency channel (for the hopping on test, the hopping sequence shall include the highest frequency channel) and repeat step c) through step d). g) The band-edge measurement shall be reported by providing plot(s) of the measuring instrument display; the plot axes and the scale units per division shall be clearly labeled. Tabular data may be reported in addition to the plot(s). Test results: Complies See next pages for actual measured spectrum plots. CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (10) / (28) Pages Fax: +82-31-624-9501 Band–edge ANT-A Test Frequency : Lowest Test Frequency : Highest CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (11) / (28) Pages Fax: +82-31-624-9501 Band–edge ANT-B Test Frequency : Lowest Test Frequency : Highest CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (12) / (28) Pages Fax: +82-31-624-9501 4.2 Field strength Test Location 10 m SAC (test distance : 10 m, 3 m) 3 m SAC (test distance : 3 m) Test Procedures 1) In the frequency range of 9 kHz to 30 MHz, magnetic field is measured with Loop Antenna. The center of the Loop Test Antenna is 1m above the ground. During the measurement the Loop Test Antenna rotates about its vertical axis for maximum response at each azimuth about the EUT. 2) In the frequency rage above 30 MHz, Bi-Log Test Antenna(30 MHz to 1 GHz) and Horn Antenna(above 1 GHz) are used. Test Antenna is 3m away from the EUT. Test Antenna height is carried from 1m to 4m above the ground to determine the maximum value of the field strength. The emissions levels at both horizontal and vertical polarizations should be tested. Test Settings: Frequency Range = 9 kHz ~ 12.75 GHz (10th harmonic) a) RBW = 1 MHz for f ≥ 1 GHz, 120 kHz for f < 1 GHz, 9 kHz for f < 30 MHz b) VBW ≥ RBW c) Sweep time = auto couple CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (13) / (28) Pages Fax: +82-31-624-9501 Requirement : The field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following: Fundamental frequency Field strength of fundamental Field strength of harmonics 902-928 MHz 50 mV/m (94 dBuV/m) 500 uV/m (54 dBuV/m) Field strength limits are specified at a distance of 3 meters. Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. FCC Part 15 § 15.209 (a) Except as provided elsewhere in this Subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table : Field Strength Field Strength Measurement Frequency(MHz) uV/m@3m dBuV/m@3m Distance (meters) 0.009-0.490 2400/F(kHz) - 300 0.490-1.705 24000/F(kHz) - 30 1.705-30 30 - 30 30-88 100** 40 3 88-216 150** 43.5 3 216-960 200** 46 3 Above 960 500 54 3 ** Except as provided in 15.209(g).fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54-72MHz, 76- 88MHz, 174-216MHz, 470-806MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g.15.231 and 15.241. Note : 1) For above 1 GHz, the emission limit in this paragraph is based on measurement instrumentation employing an average detector, measurement using instrumentation with a peak detector function, corresponding to 20 dB above the maximum permitted average limit. 2) For above 1 GHz, limit field strength of harmonics : 54 dBuV/m@3m (AV) and 74 dBuV/m@3m (PK) 3) Average value = Peak value + Duty cycle correction factor(For pulse timing characteristics such as fundamental and harmonic emissions) CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (14) / (28) Pages Fax: +82-31-624-9501 FCC Part 15 § 15.205 (a) Except as shown in paragraph (d) of this section, only spurious emissions are permitted in any of the frequency bands listed below: MHz MHz MHz MHz MHz GHz 0.09-0.11 8.37626-8.38675 73-74.6 399.9-410 2690-2900 10.6-12.7 1 0.495-0.505 8.41425-8.41475 74.8-75.2 608-614 3260-3267 13.25-13.4 2.1735-2.1905 12.29-12.293 108-121.94 960-1240 3332-3339 14.47-14.5 4.125-4.128 12.51975-12.52025 123-138 1300-1427 3345.8-3358 15.35-16.2 4.17725-4.17775 12.57675-12.57725 149.9-150.05 1435-1626.5 3600-4400 17.7-21.4 156.52475- 4.20725-4.20775 13.36-13.41 1645.5-1646.5 4500-5150 22.01-23.12 156.52525 6.215-6.218 16.42-16.423 156.7-156.9 1660-1710 5350-5460 23.6-24 6.26775-6.26825 16.69475-16.69525 162.0125-167.17 1718.8-1722.2 7250-7750 31.2-31.8 6.31175-6.31225 16.80425-16.80475 167.72-173.2 2200-2300 8025-8500 36.43-36.5 2 8.291-8.294 25.5-25.67 240-285 2310-2390 9000-9200 Above 38.6 8.362-8.366 37.5-38.25 322-335.4 2483.5-2500 9300-9500 1 Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz. 2 Above 38.6 § 15.205 (b) Except as provided in paragraphs (d) and (e), the field strength of emissions appearing within these frequency bands shall not exceed the limits shown is Section 15.209. At frequencies equal to or less than 1000 MHz, compliance with the limits in Section 15.209 shall be demonstrated using measurement instrumentation employing a CISPR quasi-peak detector. Above 1000 MHz, compliance with the emission limits in Section 15.209 shall be demonstrated based on the average value of the measured emissions. The provisions in Section 15.35 apply to these measurements. CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (15) / (28) Pages Fax: +82-31-624-9501 Test Setup: 1) For field strength of emissions from 9 kHz to 30 MHz 2) For field strength of emissions from 30 MHz to 1 GHz CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (16) / (28) Pages Fax: +82-31-624-9501 3) For field strength of emissions above 1 GHz CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (17) / (28) Pages Fax: +82-31-624-9501 Test Data : 1) Field strength of fundamental The requirements are: Complies Test mode : Transmit, ANT-A Duty Ant. Frequency Reading* C.F Cycle Result Limit Margin Pol. Remark [MHz] [dBuV/m] [dB/m] c.f [dBuV/m] [dBuV/m] [dB] (V/H) [dB] 902.4 V 105.69 -3.30 -17.70 84.69 94 9.31 915.2 V 104.69 -3.80 -17.70 83.19 94 10.81 927.6 V 104.18 -3.70 -17.70 82.78 94 11.22 Test mode : Transmit, ANT-B Duty Ant. Frequency Reading* C.F Cycle Result Limit Margin Pol. Remark [MHz] [dBuV/m] [dB/m] c.f [dBuV/m] [dBuV/m] [dB] (V/H) [dB] 902.4 V 104.69 -3.30 -17.70 83.69 94 10.31 915.2 V 103.57 -3.80 -17.70 82.07 94 11.93 927.6 V 103.22 -3.70 -17.70 81.82 94 12.18 1. Result = Reading + c.f(correction factor) + Duty cycle c.f 2. Correction factor = Antenna factor + Cable loss + 6 dB attenuator - Amp Gain 3. Duty cycle c.f = 20log(Duty cycle) = 20log(0.13) = -17.7 dB 4. The Unwanted emission was measured in the following position: EUT stand-up position(X, Y axis), lie-down position(Z axis). The worst emission was found in lie-down position(X axis) and the worst case was recorded. * Reading data is the peak value. CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (18) / (28) Pages Fax: +82-31-624-9501 2) Field strength of outside of the specified frequency bands – 9 kHz to 30 MHz The requirements are: Complies Frequency Measured Data Margin Remark (MHz) (dBuV/m) (dB) - - - See note Note : The amplitude of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. Distance extrapolation factor = 40 log (specific distance / test distance) (dB) CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (19) / (28) Pages Fax: +82-31-624-9501 3) Field strength of outside of the specified frequency bands – 30MHz to 1GHz Test mode : Transmit, ANT-A, low channel(Worst case) The requirements are: Complies Test Frequency : Lowest Remark : 1. Result = Reading + c.f(Correction factor) 2. Correction factor = Antenna factor + Cable loss + 6 dB attenuator - Amp Gain 3. This data is the peak(PK) value. 4. No.5 and No.6 are the carrier frequencies. 5. The Unwanted emission was measured in the following position: EUT stand-up position(X, Y axis), lie-down position(Z axis). The worst emission was found in lie-down position(X axis) and the worst case was recorded. CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (20) / (28) Pages Fax: +82-31-624-9501 Test mode : Transmit, ANT-B, low channel(Worst case) Remark : 1. Result = Reading + c.f(Correction factor) 2. Correction factor = Antenna factor + Cable loss + 6 dB attenuator - Amp Gain 3. This data is the peak(PK) value. 4. No.5 and No.6 are the carrier frequencies. 5. The Unwanted emission was measured in the following position: EUT stand-up position(X, Y axis), lie-down position(Z axis). The worst emission was found in lie-down position(X axis) and the worst case was recorded. CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (21) / (28) Pages Fax: +82-31-624-9501 4) Field strength of outside of the specified frequency bands – 1 GHz to 12.75 GHz The requirements are: Complies Test mode : Transmit, ANT-A Test Frequency : Lowest(902.4 MHz) Ant. Duty Frequency Reading* c.f Result Limit Margin Pol. cycle Remark [MHz] [dBuV/m] [dB/m] [dBuV/m] [dBuV/m] [dB] (V/H) c.f[dB] 1 804.8 H 72.73 -4.94 -17.70 50.09 54 3.91 Harmonic Test Frequency : Middle(915.2 MHz) Ant. Duty Frequency Reading* c.f Result Limit Margin Pol. cycle Remark [MHz] [dBuV/m] [dB/m] [dBuV/m] [dBuV/m] [dB] (V/H) c.f[dB] 1 830.4 V 73.56 -4.94 -17.70 50.92 54 3.08 Harmonic Test Frequency : Highest(927.6 MHz) Ant. Duty Frequency Reading* c.f Result Limit Margin Pol. cycle Remark [MHz] [dBuV/m] [dB/m] [dBuV/m] [dBuV/m] [dB] (V/H) c.f[dB] 1 855.2 V 72.29 -4.94 -17.70 49.65 54 4.35 Harmonic Test mode : Transmit, ANT-B Test Frequency : Lowest(902.4 MHz) Ant. Duty Frequency Reading* c.f Result Limit Margin Pol. cycle Remark [MHz] [dBuV/m] [dB/m] [dBuV/m] [dBuV/m] [dB] (V/H) c.f[dB] 1 804.8 V 71.34 -4.94 -17.7 48.70 54 5.30 Harmonic Test Frequency : Middle(915.2 MHz) Ant. Duty Frequency Reading* c.f Result Limit Margin Pol. cycle Remark [MHz] [dBuV/m] [dB/m] [dBuV/m] [dBuV/m] [dB] (V/H) c.f[dB] 1 830.4 V 73.79 -4.94 -17.70 51.15 54 2.85 Harmonic Test Frequency : Highest(927.6 MHz) Ant. Duty Frequency Reading* c.f Result Limit Margin Pol. cycle Remark [MHz] [dBuV/m] [dB/m] [dBuV/m] [dBuV/m] [dB] (V/H) c.f[dB] 1 855.2 V 69.53 -4.94 -17.70 46.89 54 7.11 Harmonic Remarks 1. Result = Reading + c.f(correction factor) + Duty cycle c.f 2. Correction factor = Antenna factor + Cable loss + 6 dB attenuator - Amp Gain 3. Duty cycle c.f = 20log(Duty cycle) = 20log(0.13) = -17.7 dB 4. The Unwanted emission was measured in the following position: EUT stand-up position(X, Y axis), lie-down position(Z axis). The worst emission was found in lie-down position(X axis) and the worst case was recorded. * Reading data is the peak value. CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (22) / (28) Pages Fax: +82-31-624-9501 4.3 AC Conducted Emissions A radio apparatus that is designed to be connected to the public utility (AC) power line shall ensure that the radio frequency voltage, which is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz-30 MHz, shall not exceed the limits. Instrument Settings IF Band Width: 9 kHz Test Procedures The EUT was placed on a non-metallic table 0.8m above the metallic, grounded floor and 0.4m from the reference ground plane wall. The distance to other metallic surfaces was at least 0.8m. Amplitude measurements were performed with a quasi-peak detector and an average detector. Limit Frequency Conducted Limit (dBuV) (MHz) Quasi-peak Average** 0.15 ~ 0.5 66 to 56* 56 to 46* 0.5 ~ 5 56 46 5 ~ 30 60 50 * The level decreases linearly with the logarithm of the frequency. ** A linear average detector is required. Test Results The requirements are: Complies Test mode : Transmit, 5Vdc, ANT-A, low channel(Worst case) Frequency Measured Data Margin Remark [MHz] [dBuV] [dB] 0.550 42.6 3.4 Average CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (23) / (28) Pages Fax: +82-31-624-9501 Test Data [LINE] CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (24) / (28) Pages Fax: +82-31-624-9501 [NEUTRAL] CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (25) / (28) Pages Fax: +82-31-624-9501 Test mode : Transmit, POE, ANT-B, low channel(Worst case) Frequency Measured Data Margin Remark [MHz] [dBuV] [dB] 0.897 39.3 6.7 Quasi-peak Test Data [LINE] Class B_L1 80 75 70 65 60 55 50 45 Level in dB킮 40 35 30 25 20 15 10 5 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (26) / (28) Pages Fax: +82-31-624-9501 [NEUTRAL] CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (27) / (28) Pages Fax: +82-31-624-9501 APPENDIX A – Test Equipment Used For Tests Name of Date of Date of Manufactur Model Due Due Equipme Serial No. Calibrat Calibrat er No. Date-1 Date-2 nt ion-1 ion-2 1 Signal Analyzer Agilent N9020A MY50510324 2017-02-03 2018-02-03 2018-01-26 2019-01-26 Signal 2 Generator Rohde & Schwarz SMB100A 175528 2016-11-01 2017-11-01 2017-11-01 2018-11-01 EMI Test Rohde & 3 ESCI7 100814 2016-11-01 2017-11-01 2017-10-25 2018-10-25 Receiver Schwarz 4 AMPLIFIER SONOMA 310 291721 2017-02-02 2018-02-02 2018-02-02 2019-02-02 5 Bilog Antenna Schaffner CBL6111C 2551 2016-05-13 2018-05-13 2016-05-13 2018-05-13 Active Loop 6 SCHWARZBECK FMZB 1513 1513-126 2016-05-25 2018-05-25 2016-05-25 2018-05-25 Antenna 6dB 7 R&S DNF 272.4110.50-2 2016-11-01 2017-11-01 2017-10-25 2018-10-25 Attenuator 8 Preamplifier Agilent 8449B 3008A02011 2016-12-01 2017-12-01 2017-11-30 2018-11-30 EMI Test Rohde & 9 ESU40 100336 2017-05-12 2018-05-12 2018-02-01 2019-02-01 Receiver Schwarz Rohde & 10 LISN ENV216 101235 2017-05-09 2018-05-09 2018-01-31 2019-01-31 Schwarz Dual-Tracking Topward Electric 11 DC Power Instruments 6303D 711196 2017-02-02 2018-02-02 2018-01-30 2019-01-30 Supply Co.,Ltd. 12 Horn Antenna ETS-Lindgren 3117 00154525 2017-09-14 2019-09-14 2017-09-14 2019-09-14 CTK-D151-06 R107 Rev.0

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Report No.: Yongin-si, Gyeonggi-do, Korea CTK-2018-01059 Tel: +82-31-339-9970 Page (28) / (28) Pages Fax: +82-31-624-9501 APPENDIX B – EUT Photographs CTK-D151-06 R107 Rev.0


Document Created: 2018-04-27 20:17:17
Document Modified: 2018-04-27 20:17:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC