user manual

FCC ID: 2AFWN-EL022G2

Users Manual

Download: PDF
FCCID_4498909

S-TAG Datasheet(EL027C2) CUSTOMER APPROVAL SHEET Company Name - MODEL EL022G2 CUSTOMER APPROVAL □ APPROVAL FOR SPECIFICATIONS ONLY (Spec. Ver. 1.0 ) □ CUSTOMER REMARK : Issued By Checked By Approved By KN Byeon YB Lee BJ Jun Solu-M 150, Maeyoung-ro(Maetan3-Dong), YoungTong-Gu, Suwon, Gyeonggi-Do, Korea Tel : 82-31-210-5114 REV 1.0 Solu-M 1/23

S-TAG Datasheet(EL027C2) S-TAGDatasheet S-Label (Electronic Label System) REV1.0 SoluM 2018-12-19 Summary This datasheet presents the general performance and specifications of S-Tagfor S-Label ESL (Electronic Shelf Label) system, which is based on IEEE 802.15.4. © 2018Solu-M. All rights reserved The names of actual companies and products mentioned herein may be the trademarks of their respective owners. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Samsung Electro- Mechanics. This docum ent is subject to change w ithout notice. REV 1.0 Solu-M 2/23

S-TAG Datasheet(EL027C2) Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................... 5 1.1 FEATURES .............................................................................................................................. 6 1.2 TYPICAL APPLICATIONS.............................................................................................................. 6 1.3 APPEARANCE ........................................................................................................................... 7 2 SPECIFICATION .................................................................................................................. 8 2.1 PRODUCT SPECIFICATION ........................................................................................................... 8 2.2 RADIO (RF) SPECIFICATION........................................................................................................ 8 2.3 MECHANICAL DRAWING ............................................................................................................. 9 2.4 LABELS ................................................................................................................................ 11 2.5 BARCODE SCANNING ............................................................................................................... 13 3 OPERATION TEST.............................................................................................................. 14 4 ESL OPERATION BY DISPLAY ........................................................................................... 15 5 PACKAGE ...................................................................... 오류! 책갈피가 정의되어 있지 않습니다. 6 CAUTIONS FOR TREATMENT........................................ 오류! 책갈피가 정의되어 있지 않습니다. 6.1 USAGE ENVIRONMENT ....................................................... 오류! 책갈피가 정의되어 있지 않습니다. 6.2 STORAGE AND USE ........................................................... 오류! 책갈피가 정의되어 있지 않습니다. 6.3 BATTERY REPLACEMENT ..................................................... 오류! 책갈피가 정의되어 있지 않습니다. 6.4 HOW TO CLEANING ........................................................... 오류! 책갈피가 정의되어 있지 않습니다. REV 1.0 Solu-M 3/23

S-TAG Datasheet(EL027C2) Document History Rev. Date Revision history Page 1.0 19DEC2018 Initial release - REV 1.0 Solu-M 4/23

S-TAG Datasheet(EL027C2) 1 General Description This S-Tag product is a part of Samsung S-Label (Electronic Shelf Label) system as well as S-Label Gateway (S-Gate), Remote controller (S-RC). S-Label system make up a system that electronically displays price and other product information on S-Tags, which has been traditionally printed or written on paper in places like retail markets. S-Tag receives product price/information updates from S-Gate and updates or changesits display of price and other information. S-Tag is the product based on IEEE standard 802.15.4 for low power wireless communication applications. S-Tag consists of RF transceiver, RF circuitry and ARM Cortex M3 MCU offering IEEE 802.15.4 based network protocol and MAC protocol and other peripheral devices. Figure 1ESL System REV 1.0 Solu-M 5/23

S-TAG Datasheet(EL027C2) 1.1 Features - Display : E-Paper Display (EPD)(active type)(522.92mm X 47.76 mm) - Display Color : Black, White, Red - Display Resolution : 104x212 pixel (112dpi) - Communication : Wireless communication based on IEEE 802.15.4 - Operating on 2.4GHz Unlicensed ISM band for ZigBee - Low Power Consumption - External Wakeup : RF Wakeup (using ISM Band[2.4GHz]) - Outline Dimension : 69.4 mm x 31.0 mm x 11.65 mm - Case Color : White - Working condition: Indoor where wireless communication is available. - Hardware Version : R14 , S/W Version : 68, PMN : EL022G2 - PMN = EL022G2 1.2 Typical Applications - Retail industry with electronic displays, platforms, solutions and services. - Intelligently communicating, managing, and optimizing price and product informations. REV 1.0 Solu-M 6/23

S-TAG Datasheet(EL027C2) 1.3 Appearance Figure 2Appearance REV 1.0 Solu-M 7/23

S-TAG Datasheet(EL027C2) 2 Specification 2.1 Product Specification Item Description Size 69.4 mm x 31.0 mm x 11.65 mm CR2450 Lithium Battery (3V) 2.4 ~ 3.3Vdc(condition : In active status) Battery(Life Time) 5 years available for1updates in a day at room temperature (The Battery Life time is dependent on the operating conditions for ESL [temperature, etc…]) Electrical paper display (active type) (22.92mm X 47.76 mm) Display Display Resolution : : 104x212 pixel (112dpi) Housing Color White Information display Price, Unit, Symbol, Product Informationetc. Communication Wireless communication based on IEEE 802.15.4 Communication Distance Radius 20m (Line of Sight) Operation Temp. 0 ~ 40 °C Storage Temp. -25 ~ 60 °C Humidity 35 ~ 70% RH 2.2 Radio (RF) 1 Specification SPEC Item Parameter Unit Condition Min Typ Max Transmit Power -5 0 8 dBm TX Error Vector Magnitude - 10 30 % When measured for 100 chips Tx Current - 35 mA Total current at max Tx Power RX Receiver Sensitivity -70 - - dBm PER < 1% 1 Test Channel : 2480MHz REV 1.0 Solu-M 8/23

S-TAG Datasheet(EL027C2) 2.3 Mechanical Drawing 2.3.1 Case Dimension Figure 3 Mechanical Dimension REV 1.0 Solu-M 9/23

S-TAG Datasheet(EL027C2) 2.3.2 Exploded View Figure 4Exploded View REV 1.0 Solu-M 10/23

S-TAG Datasheet(EL027C2) 2.4 Labels 2.4.1 Serial NumberInformation *Serial1,2CodeValue 133GSAA2JW ①②③④⑤⑥⑦ ①Year:Lasttwodigitsofmanufacturingyear. (00~99,example:2013is'13') ②Month:Manufacturingmonth (1~9,X(10),Y(11),Z(12)) ③Date:Manufacturingdate (1~9,A(10)~V(31)) ④Vendor:Onecharacterofmanufacturingvendor ((D : Dongguan Solu-M, V : Solu-M Vina., T : TSEM, …...etc)) ⑤Linenumber:OnecharacterofManufacturingLinenumber ('A','B','C',etc) ⑥Revision:Productrevisionnumber (A:First,B:Second,C:Third,etc) ⑦ZigBeeICLotNumber:Last3characters (032 : SEM9110 1532(15 : Year, 32 : Week)) REV 1.0 Solu-M 11/23

S-TAG Datasheet(EL027C2) 2.4.2 Product and Mac Label Drawings Figure 5 Product and Mac Labels Product information is indicated in a printed sticker label. The information consists of MODEL (model name), MFD (manufacturing date), S/N (serial number), MAC (MAC address), CE certification mark, FCC ID and Manufacture (SoluM). 1)ModelName:EL022G2WRC 2)MFD:(month).(date).(year)ex)MAY.16.2016 3)S/N:DailyProductionQuantity(6digits)&SerialNumberInformation (hexadecimal10digits) REV 1.0 Solu-M 12/23

S-TAG Datasheet(EL027C2) 2.5 Barcode Scanning 2.5.1 Barcode Scanning Condition Typically Scan distance is 8 ~ 9cm and angle is horizontality Example) Item MODEL Distance Angle SYMBOL (DS6708-SR20007ZZR) 8~9cm Horizontality Scanner DATALOGIC (QUICKSCAN QD2430) 8~9cm Horizontality Motorola (MC3190-SI2H04E0A) 8~9cm Horizontality Motorola (MC17T-00) 6cm 30º PDA Motorola (MC4597-BAPBA0000) 8~9cm Horizontality M3 (NA8NWCNMH40078) 8~9cm Horizontality <Horizontality><30º> REV 1.0 Solu-M 13/23

S-TAG Datasheet(EL027C2) 3 Operation Test  Equipments : ESL Tag, Gateway, R/C Figure 6 Operation Test  Test Scenario ① Ready to Gateway and R/C ② Wake up Tag with R/C ③ Tag start to communicate with Gateway ④ Tag display the numeric information received from Gateway ⑤ Check Tag(EPD display status & MAC address value) ⑥ Wake up Tag with R/C ⑦ Check Tag(EPD display(blank display))  Criterion (Below both two conditions should be all satisfied) ① Good :You can see ‘Black’ →‘White’ display ② Compare MAC address with that of label attached to Front or Back plane. ③  Wake up area Figure 7Wake up Area REV 1.0 Solu-M 14/23

S-TAG Datasheet(EL027C2) 4 ESL Operation by display It will be updated before 2nd release. Below is just a sample. Display State User Action STATE: 0 None Initial display when shipped from the manufacturer (All white). STATE: 1 To assign a tag using a PDA No change. STATE 1  2 Assign Process Searching for GWs → Remove tape on the tag (Tag version, MAC and then Tag can start to ZZZ addressand triangle). search the gateway automatically w/o beeper XXXXXXXXXXXX REV 1.0 Solu-M 15/23

S-TAG Datasheet(EL027C2) STATE 2  4 None A tag is connected to a GW and received price (Price) STATE 2 3 Lost Status A tag failed to locate a GW (Tag version, MAC address). ZZZ XXXXXXXXXXXX STATE 4 5 Lost Status Connection to a GW is lost → Even Tag lost GW, price (price and Rectangle on and other information keep upper right corner) to be displayed with lost symbol‘◆’ STATE 5 6 Woken up by abeeper When connection is lost and woken up by an RC (blinks with the price and Rectangle) Starts to search GWs. REV 1.0 Solu-M 16/23

S-TAG Datasheet(EL027C2) STATE 4 1 To clear an assigned tag using a PDA Initial display (Tag version, MAC address). ZZZ XXXXXXXXXXXX 5. Pakage REV 1.0 Solu-M 17/23

S-TAG Datasheet(EL027C2) 4. Cautions for Treatment Provisions should be made to protect against any damage to the product caused by improper handling. It is highly recommended that the product should be installed within 3 months from the date of arrival in the logistics hub. Recommended storage condition is in 0-40 Celsius degree, 35-70% RH environment. This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device, therefore, may not be used for applications where safety of human lives is concerned. 4.1 Usage Environment Take extra cautions when using this RF device in the vicinity of other electronic devices and appliances. Most electronic devices and appliances use electromagnetic waves. Electromagnetic waves emitted by this RF device can affect other electronic devices and appliances. If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals. 4.2 Storage and Use  Moisture and liquids can damage internal parts and circuit boards if allowed to enter into the device itself.  Do not place or store the product on a sloped surface. The product may slide and fall off the surface and damaged.  Use the product in temperatures ranging from 0℃ to +40℃. Parts and circuits may be damaged if used or stored under temperature extremes.  The display panel needs extra care when handling. - Do not apply any impacts on outside since e-Paper display is fragile. - Continuous exposure to excessive moisture (over 60% RH) or UV makes display lifetime shortened. - Ghosting image may be appeared in temperature conditions of less than 15 Celsius degree.  Avoid areas with strong magnetism or subject to magnetism. Contact between the device and a magnetic object can lead to malfunctions.  Do not place the product near heat-producing kitchen appliances like a stove or a microwave or in the vicinity of highly pressurized containers.  External impact to the product, such as from being dropped, can damage the product or battery casing can be separated. REV 1.0 Solu-M 18/23

S-TAG Datasheet(EL027C2)  Twisting and bending the product can damage the exterior casing and the internal components.  If this product operates abnormally in eliminating battery vinyl or replacing battery, you should discharge it by contacting battery terminal (+) and (-).  This product uses 2.4GHz frequency band for wireless communication network. Radio communications can be limited or affected by other applications which share same frequency band, such as WiFi, Bluetooth, Zigbee, etc.  Frequent communications, updates and screen renewals may reduce battery life time. 4.3 Battery Replacement Audience Authorized persons with the following knowledge are allowed to replace the battery. - . Battery / -. Electronic assemblies like circuit board / -. Compliance of the instruction  ※ Note : If not authorized person, it will not give any warranty. (When need to replace the battery. Please contact authorized person and get instructions.) Instructions - Risk of short circuit if battery is incorrectly installed/stored. - Keep attention that your hands are dry before you start with replacement - Keep away batteries from children and infants. - Don’t heat, charge, bend, drop, short-circuit and disassemble battery. - Don’t mix the used battery together with the new battery or different type of batteries. ※Note : Battery rarely has a little stain or leak. ■Battery directional Steps ① Open the battery cover. ② Take out the batteries. ③ Put in the new batteries. ④ Check the batteries direction. ⑤ Put the battery cover. [View] Top : (+)Positive (+) (+) Bottom :(-)Negative REV 1.0 Solu-M 19/23

S-TAG Datasheet(EL027C2) 4.4 How to cleaning For Spray Cleaning: Stand Tags not to lay down tags Lightly spray surfaces and wait few second Wipe dry using cloth or tissues. Stand Dry out tags Note:  When spray the tags, make sure not to flow any liquid into inside tags  It may damage tags directly, circuit and battery.  You can use mild, non-alcoholic detergents or glass cleaner.  Recommend non-abrasive cloths: Microfiber,Cotton T-shirt ,Cotton handkerchief, Cotton tea towel For Wet Tissue Cleaning: Lay down tags or stand tags Wipe using wet tissues Dry out tags We do not guarantee any water damaged tags REV 1.0 Solu-M 20/23

S-TAG Datasheet(EL027C2) WARNING : This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, Including interference that may cause undesired operation. NOTE : REV 1.0 Solu-M 21/23

S-TAG Datasheet(EL027C2) WARNING:ISED IC Information to User This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device Le présentappareilestconforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitationestautorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareildoit accepter tout brouillageradioélectriquesubi, meme si le brouillageest susceptible d’encompromettre le fonctionnement. REV 1.0 Solu-M 22/23


Document Created: 2019-10-16 14:47:04
Document Modified: 2019-10-16 14:47:04
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC