test report

FCC ID: 2AFWN-EL016GF

Test Report

Download: PDF
FCCID_4486912

                              TEST REPORT
                   CTK Co., Ltd.
                   (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
                   Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
                   Tel: +82-31-339-9970                   Page (1) / (34) Pages
                   Fax: +82-31-624-9501




    1. Client
    ◦ Name : SOLUM CO.,LTD.

    ◦ Address : 4,5,6th F, 357, Guseong-ro, Giheung-gu, Gyeonggi-do, Yongin-si, Republic of

                  Korea

    ◦ Date of Receipt : 2019-09-16

    2. Manufacturer
    ◦ Name #1 : SOLUM CO.,LTD.
    ◦ Address #1 : 4,5,6th F, 357, Guseong-ro, Giheung-gu, Gyeonggi-do, Yongin-si, Republic

                  of Korea

    ◦ Name #2 : SOLUM VINA CO., LTD

    ◦ Address #2 : Plot B3, Ba Thien 2 Industrial park, Thien Ke Ward, Binh Xuyen District,

                  Vinh Phuc Province, 281200., People's Republic of Vietnam

    3. Use of Report : For FCC Certification
    4. Test Sample / Model: Electronic Shelf Label / EL016GF
    5. Date of Test : 2019-09-25 to 2019-09-27
    6. Test Standard(method) used : FCC 47 CFR part 15 subpart C 15.247,
                                                    ANSI C63.10-2013

    7. Testing Environment: Temp.: (23 ± 1) ℃, Humidity: (51 ± 3) % R.H.
    8. Test Results : Compliance

    The results shown in this test report refer only to the sample(s) tested unless otherwise
    stated. This Test Report cannot be reproduced, except in full.




                     Tested by                               Technical Manager

    Affirmation
                     Bong-seok Kim: (Signature)              Young-taek Lee: (Signature)


                                                                                   2019-09-30



                              Republic of KOREA    CTK Co., Ltd.

CTK-D151-06                                                                                R101 Rev.0


                  CTK Co., Ltd.
                  (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
                  Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
                  Tel: +82-31-339-9970                   Page (2) / (34) Pages
                  Fax: +82-31-624-9501




                          REPORT REVISION HISTORY
        Date                                     Revision                        Page No
     2019-09-30                          Issued (CTK-2019-03784)                    all




This report shall not be reproduced except in full, without the written approval of
CTK Co., Ltd. This document may be altered or revised by CTK Co., Ltd. personnel
only, and shall be noted in the revision section of the document. Any alteration of
this document not carried out by CTK Co., Ltd. will constitute fraud and shall nullify
the document.




CTK-D151-06                                                                       R101 Rev.0


                       CTK Co., Ltd.
                       (Ho-dong), 113, Yejik-ro, Cheoin-gu,             Report No.:
                       Yongin-si, Gyeonggi-do, Korea                    CTK-2019-03784
                       Tel: +82-31-339-9970                             Page (3) / (34) Pages
                       Fax: +82-31-624-9501




                                                 CONTENTS
1. General Product Description ........................................................................................ 4
     1.1 Client Information .............................................................................................. 4
     1.2 Product Information ............................................................................................ 4
     1.3 Peripheral Devices .............................................................................................. 4
2. Facility and Accreditations ........................................................................................... 5
     2.1 Test Facility........................................................................................................ 5
     2.2 Laboratory Accreditations and Listings .................................................................. 5
     2.3 Calibration Details of Equipment Used for Measurement .......................................... 5
3. Test Specifications ..................................................................................................... 6
     3.1 Standards.......................................................................................................... 6
     3.2 Mode of operation during the test ......................................................................... 6
     3.3 Maximum Measurement Uncertainty ..................................................................... 7
4. Technical Characteristic Test ........................................................................................ 8
     4.1 6dB Bandwidth ................................................................................................... 8
     4.2 Maximum peak Conducted Output Power ............................................................. 13
     4.3 Power Spectral Density ..................................................................................... 16
     4.4 Band Edge & Conducted Spurious emission .......................................................... 19
     4.5 Radiated Emission ............................................................................................ 24
APPENDIX A – Test Equipment Used For Tests ................................................................. 34




CTK-D151-06                                                                                                        R101 Rev.0


                     CTK Co., Ltd.
                     (Ho-dong), 113, Yejik-ro, Cheoin-gu,       Report No.:
                     Yongin-si, Gyeonggi-do, Korea              CTK-2019-03784
                     Tel: +82-31-339-9970                       Page (4) / (34) Pages
                     Fax: +82-31-624-9501




1. General Product Description
1.1 Client Information

 Company                                      SOLUM CO.,LTD.
                                              4,5,6th F, 357, Guseong-ro, Giheung-gu, Gyeonggi-do, Yongin-si,
 Contact Point
                                              Republic of Korea
                                              Name : Kwangno Byeon
 Contact Person                               E-mail : jsseo@solu-m.com
                                              Tel : +82-31-8006-8448


1.2 Product Information

 FCC ID                                       2AFWN-EL016GF
 Product Description                          Electronic Shelf Label
 Basic Model name                             EL016GF
 Variant Model name                           -
 Operating Frequency                          2 405 MHz - 2 480 MHz
 RF Output Power                              0.99 dBm(1.256 mW)
                                              Antenna type : PCB Pattern
 Antenna Specification
                                              Peak Gain : 2.19 dBi
 Number of channels                           16
 Channel Spacing                              5 MHz
 Type of Modulation                           OQPSK
 Power Source                                 DC 3 V(CR2450 Battery * 1EA)
 RF Power setting in Test SW                  Initial value


1.3 Peripheral Devices

  -For Conducted Measurement and Radiated Measurement
            Device                    Manufacturer                Model No.                Serial No.
 Notebook                   HP Inc.                           HP Probook 650 G1    5CG5114K13
 AC Adapter                 HP Inc.                           PPP012D-S            677777-003




CTK-D151-06                                                                                          R101 Rev.0


                      CTK Co., Ltd.
                      (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
                      Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
                      Tel: +82-31-339-9970                   Page (5) / (34) Pages
                      Fax: +82-31-624-9501




2. Facility and Accreditations
2.1 Test Facility

The measurement facility is located at (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yong-in-si,
Gyeonggi-do, Korea.

2.2 Laboratory Accreditations and Listings

          Country                Agency                      Registration Number

               USA                  FCC                               805871

              CANADA               ISED                              8737A-2

              KOREA                NRRA                               KR0025



2.3 Calibration Details of Equipment Used for Measurement

Test equipment and test accessories are calibrated on regular basis. The maximum time
between calibrations is one year or what is recommended by the manufacturer, whichever is
less. All test equipment calibrations are traceable to the Korea Research Institute of Standards
and Science (KRISS), therefore, all test data recorded in this report is traceable to KRISS.




CTK-D151-06                                                                            R101 Rev.0


                     CTK Co., Ltd.
                     (Ho-dong), 113, Yejik-ro, Cheoin-gu,           Report No.:
                     Yongin-si, Gyeonggi-do, Korea                  CTK-2019-03784
                     Tel: +82-31-339-9970                           Page (6) / (34) Pages
                     Fax: +82-31-624-9501




3. Test Specifications
3.1 Standards

   Section in                                                                           Status             Test
                                          Requirement(s)
      FCC                                                                              (Note 1)          Condition

    15.247(a)        6 dB Bandwidth                                                         C

    15.247(e)        Transmitter power spectral density                                     C
                                                                                                          Conducted
    15.247(b)        Maximum peak conducted output power                                    C

    15.247(d)        Unwanted emission                                                      C

     15.209          Transmitter emission                                                   C             Radiated
                                                                                                             Line
    15.207(a)        AC Conducted Emission                                             NA(Note 3)
                                                                                                          Conducted

 Note 1: C=Complies     NC=Not Complies       NT=Not Tested     NA=Not Applicable

 Note 2: The data in this test report are traceable to the national or international standards.

 Note 3: The equipment is operated on battery power only.

 Note 4: The sample was tested according to the following specification: FCC Part 15.247, ANSI C63.10-2013

 Note 5: The tests were performed according to the method of measurements prescribed in KDB No.558074.


3.2 Mode of operation during the test

The EUT is operated in a manner representative of the typical of the equipments.
During at testing, system components were manipulated within the confines of typical usage to
maximize each emission. All modulation modes were tests.
The results are only attached worst cases.

Test Frequency
          Lowest channel                           Middle channel                           Highest channel
              2 405 MHz                               2 445 MHz                                   2 480 MHz


Test mode
                      Modulation                                                    Duty Cycle
                          OQPSK                                                        100 %




CTK-D151-06                                                                                                   R101 Rev.0


                     CTK Co., Ltd.
                     (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
                     Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
                     Tel: +82-31-339-9970                   Page (7) / (34) Pages
                     Fax: +82-31-624-9501




3.3 Maximum Measurement Uncertainty

The value of the measurement uncertainty for the measurement of each parameter.
Coverage factor k = 2, Confidence levels of 95 %

                      Description                                        Uncertainty
               Conducted RF Output Power                                     1.5 dB
                   Occupied Bandwidth                                       0.1 MHz
              Unwanted Emission(conducted)                                   3.0 dB
              Radiated Emissions (f ≤ 1 GHz)                                 4.0 dB
              Radiated Emissions (f > 1 GHz)                                 5.0 dB




CTK-D151-06                                                                            R101 Rev.0


                    CTK Co., Ltd.
                    (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
                    Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
                    Tel: +82-31-339-9970                   Page (8) / (34) Pages
                    Fax: +82-31-624-9501




4. Technical Characteristic Test
4.1 6dB Bandwidth & 99% Bandwidth

  Test Procedures(ANSI C63.10-2013 6.9.2)

  Measure the maximum width of the emission that is constrained by the frequencies
  associated with the two outermost amplitude points (upper and lower frequencies) that are
  attenuated by 6 dB relative to the maximum level measured in the fundamental emission.

  Test Procedures(ANSI C63.10-2013 6.9.3)

  The occupied bandwidth is the frequency bandwidth such that, below its lower and above its
  upper frequency limits, the mean powers are each equal to 0.5% of the total mean power of
  the given emission.
  Use the 99% power bandwidth function of the instrument and report the measured
  bandwidth.

  Test Settings :
  Center frequency = the highest, middle and the lowest channels
  a) RBW = 100 kHz                                     b) VBW ≥ 3 x RBW
  c) Detector = peak                                   d) Trace mode = Max hold
  e) Sweep = auto couple
  f) Allow trace to fully stabilize
  g) Measure the maximum width of the emission that is constrained by the frequencies
     associated with the two outermost amplitude points (upper and lower frequencies) that
     are attenuated by 6 dB relative to the maximum level measured in the fundamental
     emission.


  Limit :
  6 dB Bandwidth >        500kHz




CTK-D151-06                                                                         R101 Rev.0


                       CTK Co., Ltd.
                       (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
                       Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
                       Tel: +82-31-339-9970                   Page (9) / (34) Pages
                       Fax: +82-31-624-9501




  Test Data :


                            Frequency       6 dB Bandwidth       99 % Bandwidth
          Channel                                                                     Result
                              [MHz]              [MHz]               [MHz]
               Low             2 405               1.59                  2.62         Complies

              Middle           2 445               1.62                  2.62         Complies

              High             2 480               1.60                  2.62         Complies




  See next pages for actual measured spectrum plots.




CTK-D151-06                                                                                    R101 Rev.0


              CTK Co., Ltd.
              (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
              Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
              Tel: +82-31-339-9970                   Page (10) / (34) Pages
              Fax: +82-31-624-9501



                                6 dB Bandwidth[MHz]
                                Low channel (2 405 MHz)




                               Middle channel (2 445 MHz)




CTK-D151-06                                                                   R101 Rev.0


              CTK Co., Ltd.
              (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
              Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
              Tel: +82-31-339-9970                   Page (11) / (34) Pages
              Fax: +82-31-624-9501



                                High channel (2 480 MHz)




                                99% Bandwidth[MHz]
                                Low channel (2 405 MHz)




CTK-D151-06                                                                   R101 Rev.0


              CTK Co., Ltd.
              (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
              Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
              Tel: +82-31-339-9970                   Page (12) / (34) Pages
              Fax: +82-31-624-9501



                               Middle channel (2 445 MHz)




                                High channel (2 480 MHz)




CTK-D151-06                                                                   R101 Rev.0


                   CTK Co., Ltd.
                   (Ho-dong), 113, Yejik-ro, Cheoin-gu,      Report No.:
                   Yongin-si, Gyeonggi-do, Korea             CTK-2019-03784
                   Tel: +82-31-339-9970                      Page (13) / (34) Pages
                   Fax: +82-31-624-9501




4.2 Maximum peak Conducted Output Power

  Test Procedures(ANSI C63.10-2013 11.9.1)

  The following procedure can be used when the maximum available RBW of the instrument is
  less than the DTS bandwidth:

  Test Settings:
  Center frequency = the highest, middle and the lowest channels
  a) RBW ≥ DTS Bandwidth                              b) VBW ≥ 3 x RBW
  c) span ≥ 3 x RBW                                   d) Sweep time = auto couple
  e) Detector = peak                                  f) Trace mode= max hold
  g) Allow trace to fully stabilize
  h) Use peak marker function to determine the peak amplitude level.


  Limit :
  Maximum Output Power         <     1 W (30 dBm)


  Test Data :

                             Frequency       Measurement data             Limit
              Channel                                                                 Result
                               [MHz]              [dBm]                  [dBm]
                Low                2 405             0.99                  30         Complies

               Middle              2 445             0.77                  30         Complies

               High                2 480             -8.02                 30         Complies


  See next pages for actual measured spectrum plots.




CTK-D151-06                                                                                      R101 Rev.0


              CTK Co., Ltd.
              (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
              Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
              Tel: +82-31-339-9970                   Page (14) / (34) Pages
              Fax: +82-31-624-9501




                               Low channel (2 405 MHz)




                             Middle channel (2 445 MHz)




CTK-D151-06                                                                   R101 Rev.0


              CTK Co., Ltd.
              (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
              Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
              Tel: +82-31-339-9970                   Page (15) / (34) Pages
              Fax: +82-31-624-9501




                              High channel (2 480 MHz)




CTK-D151-06                                                                   R101 Rev.0


                   CTK Co., Ltd.
                   (Ho-dong), 113, Yejik-ro, Cheoin-gu,      Report No.:
                   Yongin-si, Gyeonggi-do, Korea             CTK-2019-03784
                   Tel: +82-31-339-9970                      Page (16) / (34) Pages
                   Fax: +82-31-624-9501




4.3 Power Spectral Density

  Test Procedures(ANSI C63.10-2013 11.10.2)

  This procedure shall be used if maximum peak conducted output power was used to
  demonstrate compliance.

  Test Settings:
  Center frequency = the highest, middle and the lowest channels
  a) RBW : 3 kHz ≤ RBW ≤ 100 kHz                      b) VBW ≥ 3 x RBW
  c) span ≥ 1.5 x DTS bandwidth                       d) Sweep time = auto couple
  e) Detector = peak                                  f) Trace mode= max hold
  g) Allow trace to fully stabilize
  h) Use the peak marker function to determine the maximum amplitude level within the RBW.


 Limit :

  Power Spectral Density <       8 dBm @ 3 kHz BW


 Test Data :

                             Frequency       Measurement data             Limit
              Channel                                                                 Result
                               [MHz]              [dBm]                  [dBm]
                Low             2 405                -9.02                  8         Complies

               Middle           2 445                -9.20                  8         Complies

               High             2 480               -18.76                  8         Complies


  See next pages for actual measured spectrum plots.




CTK-D151-06                                                                                      R101 Rev.0


              CTK Co., Ltd.
              (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
              Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
              Tel: +82-31-339-9970                   Page (17) / (34) Pages
              Fax: +82-31-624-9501




                               Low channel (2 405 MHz)




                             Middle channel (2 445 MHz)




CTK-D151-06                                                                   R101 Rev.0


              CTK Co., Ltd.
              (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
              Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
              Tel: +82-31-339-9970                   Page (18) / (34) Pages
              Fax: +82-31-624-9501




                              High channel (2 480 MHz)




CTK-D151-06                                                                   R101 Rev.0


                   CTK Co., Ltd.
                   (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
                   Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
                   Tel: +82-31-339-9970                   Page (19) / (34) Pages
                   Fax: +82-31-624-9501




4.4 Band Edge & Conducted Spurious emission

  Test Procedures(ANSI C63.10-2013 11.11.3)

 The Unwanted emission from the EUT were measured according to the dictates PKPSD
 measurement procedure in section 11.11 of ANSI C63.10-2013.

 In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or
 digitally modulated device is operating, the RF power that is produced shall be at least 20 dB
 below that in the 100 kHz bandwidth within the band that contains the highest level of the
 desired power, based on either an RF conducted or a radiated measurement, provided that
 the transmitter demonstrates compliance with the peak conducted power limits. If the
 transmitter complies with the conducted power limits based on the use of root-mean-square
 averaging over a time interval, as permitted under Section 5.4(4), the attenuation required
 shall be 30 dB instead of 20 dB. Attenuation below the general field strength limits specified
 in RSS-Gen is not required.


  Test Settings:
  Center frequency = the highest, middle and the lowest channels
  a) RBW = 100 kHz                                    b) VBW ≥ 3 x RBW
  c) Detector = peak                                  d) Sweep time = auto couple
  e) Trace mode= max hold
  f) Allow trace to fully stabilize
  g) Use the peak marker function to determine the maximum amplitude level.


 Limit :

  Emission level    <   20 dBc


 Test results: Complies
    - All conducted emission in any 100kHz bandwidth outside of the spread spectrum band
     was at least 20dB lower than the highest in-band spectral density. Therefore the applying
     equipment meets the requirement.


  See next pages for actual measured spectrum plots.




CTK-D151-06                                                                            R101 Rev.0


              CTK Co., Ltd.
              (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
              Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
              Tel: +82-31-339-9970                   Page (20) / (34) Pages
              Fax: +82-31-624-9501




                                      Band–edge




CTK-D151-06                                                                   R101 Rev.0


              CTK Co., Ltd.
              (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
              Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
              Tel: +82-31-339-9970                   Page (21) / (34) Pages
              Fax: +82-31-624-9501



                         Conducted Spurious emission

                               Low channel (2 405 MHz)




CTK-D151-06                                                                   R101 Rev.0


              CTK Co., Ltd.
              (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
              Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
              Tel: +82-31-339-9970                   Page (22) / (34) Pages
              Fax: +82-31-624-9501




                             Middle channel (2 445 MHz)




CTK-D151-06                                                                   R101 Rev.0


              CTK Co., Ltd.
              (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
              Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
              Tel: +82-31-339-9970                   Page (23) / (34) Pages
              Fax: +82-31-624-9501




                              High channel (2 480 MHz)




CTK-D151-06                                                                   R101 Rev.0


                  CTK Co., Ltd.
                  (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
                  Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
                  Tel: +82-31-339-9970                   Page (24) / (34) Pages
                  Fax: +82-31-624-9501




4.5 Radiated Emission

  Test Location
       10 m SAC (test distance :     10 m,      3 m)
       3 m SAC (test distance : 3 m)


  Test Procedures

  1)     In the frequency range of 9 kHz to 30 MHz, magnetic field is measured with Loop
         Antenna. The center of the Loop Test Antenna is 1m above the ground. During the
         measurement the Loop Test Antenna rotates about its vertical axis for maximum
         response at each azimuth about the EUT.
  2)     In the frequency rage above 30 MHz, Bi-Log Test Antenna(30 MHz to 1 GHz) and Horn
         Test Antenna(above 1 GHz) are used. Test Antenna is 3m away from the EUT. Test
         Antenna height is carried from 1m to 4m above the ground to determine the maximum
         value of the field strength. The emissions levels at both horizontal and vertical
         polarizations should be tested.

  Instrument Settings

  Frequency Range = 9 kHz ~ 25 GHz (2.4 GHz 10th harmonic)
  a) RBW = 1 MHz for f ≥ 1 GHz, 100 kHz for f < 1 GHz, 9 kHz for f < 30 MHz
  b) VBW ≥ RBW
  c) Sweep time = auto couple




CTK-D151-06                                                                       R101 Rev.0


                    CTK Co., Ltd.
                    (Ho-dong), 113, Yejik-ro, Cheoin-gu,      Report No.:
                    Yongin-si, Gyeonggi-do, Korea             CTK-2019-03784
                    Tel: +82-31-339-9970                      Page (25) / (34) Pages
                    Fax: +82-31-624-9501




  Limit :

  FCC Part 15 § 15.205 (a) Except as shown in paragraph (d) of this section, only
  spurious emissions are permitted in any of the frequency bands listed below:


                                Table 1. Restricted Frequency Bands
       MHz              MHz                MHz                MHz                MHz           GHz
     0.09-0.11      8.37626-8.38675         73-74.6         399.9-410           2690-2900     10.6-12.7
   1
    0.495-0.505     8.41425-8.41475        74.8-75.2         608-614            3260-3267    13.25-13.4
  2.1735-2.1905       12.29-12.293        108-121.94         960-1240           3332-3339    14.47-14.5
   4.125-4.128     12.51975-12.52025        123-138         1300-1427          3345.8-3358   15.35-16.2
 4.17725-4.17775   12.57675-12.57725     149.9-150.05      1435-1626.5          3600-4400     17.7-21.4
                                          156.52475-
 4.20725-4.20775      13.36-13.41                          1645.5-1646.5       4500-5150     22.01-23.12
                                          156.52525
   6.215-6.218        16.42-16.423       156.7-156.9         1660-1710         5350-5460        23.6-24
 6.26775-6.26825   16.69475-16.69525   162.0125-167.17     1718.8-1722.2       7250-7750       31.2-31.8
 6.31175-6.31225   16.80425-16.80475     167.72-173.2        2200-2300         8025-8500      36.43-36.5
                                                                                             2
   8.291-8.294         25.5-25.67           240-285         2310-2390          9000-9200      Above 38.6
   8.362-8.366         37.5-38.25          322-335.4       2483.5-2500         9300-9500



  1
      Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz.
  2
      Above 38.6
  § 15.205 (b) Except as provided in paragraphs (d) and (e), the field strength of
  emissions appearing within these frequency bands shall not exceed the limits shown is
  Section 15.209. At frequencies equal to or less than 1000 MHz, compliance with the limits in
  Section 15.209 shall be demonstrated using measurement instrumentation employing a
  CISPR quasi-peak detector. Above 1000 MHz, compliance with the emission limits in Section
  15.209 shall be demonstrated based on the average value of               the measured emissions.
  The provisions in Section 15.35 apply to these measurements.




CTK-D151-06                                                                                    R101 Rev.0


                   CTK Co., Ltd.
                   (Ho-dong), 113, Yejik-ro, Cheoin-gu,    Report No.:
                   Yongin-si, Gyeonggi-do, Korea           CTK-2019-03784
                   Tel: +82-31-339-9970                    Page (26) / (34) Pages
                   Fax: +82-31-624-9501




  FCC Part 15 § 15.209 (a) Except as provided elsewhere in this Subpart, the emissions from
  an intentional radiator shall not exceed the field strength levels specified in the following
  table :


  Except when the requirements applicable to a given device state otherwise, emissions from
  licence-exempt transmitters shall comply with the field strength limits shown in Table 2
  Additionally, the level of any transmitter emission shall not exceed the level of the
  transmitter’s fundamental emission.


            Table 2. General Field Strength Limits for Licence-Exempt Transmitters

                                  Field Strength          Field Strength              Measurement
            Frequency(MHz)
                                    uV/m@3m               dBuV/m@3m                 Distance (meters)
              0.009-0.490         2400/F(kHz)                   -                         300
              0.490-1.705        24000/F(kHz)                   -                         30
                1.705-30              30                        -                         30
                  30-88             100**                      40                          3
                 88-216             150**                     43.5                         3
                216-960             200**                      46                          3
               Above 960             500                       54                          3


  ** Except as provided in 15.209(g).fundamental emissions from intentional radiators
  operating under this Section shall not be located in the frequency bands 54-72MHz, 76-
  88MHz, 174-216MHz, 470-806MHz. However, operation within these frequency bands is
  permitted under other sections of this Part, e.g.15.231 and 15.241.

 Note :
 1) For above 1 GHz, the emission limit in this paragraph is based on measurement
    instrumentation employing an average detector, measurement using instrumentation with
    a peak detector function, corresponding to 20 dB above the maximum permitted average
    limit.
 2) For above 1 GHz, limit field strength of harmonics : 54 dBuV/m@3m (AV) and
    74 dBuV/m@3m (PK)
 3) For measurement above 1GHz, the resolution bandwidth is set to 1 MHz and video
    bandwidth is set to 1 MHz for peak measurement and 10 Hz for average
    measurement.(Duty Cycle is > 98%,)
 4) Duty Cycle is < 98%, VBW setting will need to > 1/T.




CTK-D151-06                                                                                       R101 Rev.0


                 CTK Co., Ltd.
                 (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
                 Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
                 Tel: +82-31-339-9970                   Page (27) / (34) Pages
                 Fax: +82-31-624-9501




  Test Setup:

  1)    For field strength of emissions from 9 kHz to 30 MHz




  2)    For field strength of emissions from 30 MHz to 1 GHz




CTK-D151-06                                                                      R101 Rev.0


                 CTK Co., Ltd.
                 (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
                 Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
                 Tel: +82-31-339-9970                   Page (28) / (34) Pages
                 Fax: +82-31-624-9501



  3) For field strength of emissions above 1 GHz




CTK-D151-06                                                                      R101 Rev.0


                CTK Co., Ltd.
                (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
                Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
                Tel: +82-31-339-9970                   Page (29) / (34) Pages
                Fax: +82-31-624-9501




  Restricted band edge test data
  1)2 310 MHz to 2 390 MHz




  2)2 483.5 MHz to 2 500 MHz




 Remark :
 1. The Unwanted emission was measured in the following position: EUT stand-up position(Z
   axis), lie-down position(X,Y axis). The worst emission was found in lie-down position(X
   axis) and the worst case was recorded.
 2. Result = Reading + c.f(correction factor)
 3. Correction factor = Antenna factor + Cable loss - Amp Gain




CTK-D151-06                                                                       R101 Rev.0


                CTK Co., Ltd.
                (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
                Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
                Tel: +82-31-339-9970                   Page (30) / (34) Pages
                Fax: +82-31-624-9501



  Spurious test data
  1) 9 kHz to 30 MHz

                   Test mode : Transmit, Lowest Channel(Worst case)

  The requirements are:
     Complies
  Test Data




CTK-D151-06                                                                     R101 Rev.0


                CTK Co., Ltd.
                (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
                Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
                Tel: +82-31-339-9970                   Page (31) / (34) Pages
                Fax: +82-31-624-9501




 Remark :
 The amplitude of spurious emissions that are attenuated by more than 20 dB below the
 permissible value has no need to be reported.
 Distance extrapolation factor = 40 log (specific distance / test distance) (dB)




CTK-D151-06                                                                      R101 Rev.0


                 CTK Co., Ltd.
                 (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
                 Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
                 Tel: +82-31-339-9970                   Page (32) / (34) Pages
                 Fax: +82-31-624-9501




  2) 30 MHz to 1 GHz

                    Test mode : Transmit, Middle Channel(Worst case)

  The requirements are:
     Complies
  Test Data




  Remark :
  1. The Unwanted emission was measured in the following position: EUT stand-up position(Z
    axis), lie-down position(X,Y axis). The worst emission was found in lie-down position(X
    axis) and the worst case was recorded.
  2. Result = Reading + c.f(Correction factor)
  3. Correction factor = Antenna factor + Cable loss + 6 dB attenuator - Amp Gain
  4. This data is the Quasi-Peak value.


CTK-D151-06                                                                        R101 Rev.0


                 CTK Co., Ltd.
                 (Ho-dong), 113, Yejik-ro, Cheoin-gu,   Report No.:
                 Yongin-si, Gyeonggi-do, Korea          CTK-2019-03784
                 Tel: +82-31-339-9970                   Page (33) / (34) Pages
                 Fax: +82-31-624-9501



3) 1 GHz to 26.5 GHz

                   Test mode : Transmit, Lowest Channel(Worst case)

  The requirements are:
     Complies

  Test Data




  Remarks
  1. The Unwanted emission was measured in the following position: EUT stand-up position(Z
    axis), lie-down position(X,Y axis). The worst emission was found in lie-down position(X
    axis) and the worst case was recorded.
  2. Result = Reading + c.f(correction factor)
  3. Correction factor = Antenna factor + Cable loss - Amp Gain




CTK-D151-06                                                                        R101 Rev.0


                    CTK Co., Ltd.
                    (Ho-dong), 113, Yejik-ro, Cheoin-gu,    Report No.:
                    Yongin-si, Gyeonggi-do, Korea           CTK-2019-03784
                    Tel: +82-31-339-9970                    Page (34) / (34) Pages
                    Fax: +82-31-624-9501



APPENDIX A – Test Equipment Used For Tests

          Name of                                                                     Date of
No.                         Manufacturer       Model No.        Serial No.                           Due Date
         Equipment                                                                   Calibration
 1      Signal Analyzer          R&S              FSV30            100925            2019-01-21      2020-01-21
 2     EMI Test Receiver    Rohde & Schwarz       ESCI7            100814            2018-10-25      2019-10-25
 3    Active Loop Antenna   SCHWARZBECK         FMZB 1513         1513-126           2019-01-17      2021-01-17
 4       Bilog Antenna         Schaffner        CBL6111C            2551             2019-04-17      2021-04-17
 5        AMPLIFIER            SONOMA              310             291721            2019-01-28      2020-01-28
 6      6dB Attenuator           R&S               DNF         272.4110.50-2         2018-10-25      2019-10-25
 7     EMI Test Receiver    Rohde & Schwarz       ESU40            100336            2019-01-29      2020-01-29
 8       Horn Antenna        ETS-Lindgren          3117           00154525           2019-02-22      2021-02-22
 9       Preamplifier           Agilent           8449B         3008A02011           2018-12-03      2019-12-03
10    Band Reject Filter     Micro Tronics      BRM50702            G233             2019-01-28      2020-01-28
      System DC Power
11                                HP              6612C         US37462141           2018-12-26      2019-12-26
           Supply


          Name of
No.                         Manufacturer       Model No.        Serial No.                Check Date
         Equipment
            RF Cable
 1                           Junkosha Inc.       MWX221           1510S087                 2019-02-02
          (conducted)
 2    RF Cable (Radiated)   HUBER+SUHNER      SUCOFLEX 104       MY27558/4                 2019-02-02
                                                                     N/A
 3    RF Cable (Radiated)   HUBER+SUHNER      SUCOFLEX 104                                 2019-02-02
                                                                (below 1GHz)
 4    RF Cable (Radiated)   HUBER+SUHNER      SUCOFLEX 104       MY27573/4                 2018-11-30
                                                                     N/A
 5    RF Cable (Radiated)   HUBER+SUHNER      SUCOFLEX 106                                 2018-11-30
                                                                (above 1GHz)




CTK-D151-06                                                                                        R101 Rev.0



Document Created: 2019-10-27 10:40:34
Document Modified: 2019-10-27 10:40:34

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC