2AFT4-BPETO_User manual

FCC ID: 2AFT4-BPETO

Users Manual

Download: PDF
FCCID_3951902

BRAND|STAND® cubietrio® User Manual warning: Changes or mosifeatonsto ths unknotexprosl anorovedby thpaty esponale or comliance couts vatthe use sutortytooneate teauioment M This nviemont has ootetedand found to comay wththa imte tra ClasnBigtal vice, purevanttoPa15 otthe FOG Rdls. Tess imaredasigned to roidreasonabls retecion agansthainalitofarance i a rogental insltion. Thiseautoment gonerates,usesana an adlata rada roavency onary an. it ot nsllodand usedin accortance wih ho instrtons, may cause harnfulintererence t raio communeatons However thae ino guararien tatintaforonce wl noccur n a naricuarinsalatio. ts equloment dcascause harmi Iierfreneoto raciortelovison receio.utich can b detornina y tning e eauiomentof and on the user isencouragedto y tcorect e inaferenceby oneor more fthe faloning monsires o Recront orrelocato ho rcobing antomna 0 Increase ho aeparaton aween ho oauiomant and receiver o Gomecttte avtemantintoan utet on acireutifferentn hato which t recaveis comnoctes 0 Goneulthedealar oran exparlenced radar¥techician for hlp

Introduction Thank you for purchasing the Brandstand CubieTrios. Please be sure to read this User Manual carefully to ensure proper installation. The information in this document is subject to change and does not represent a commitment on the part of Brandstand. No part of this document may be reproduced, transmitted in any form or by any means, electronic or mechanical, including photocopy— ing, recording, or information storage and retrieval systems, or translated into any language for any purpose other than the purchaser‘s personal use, without the written permission of Brandstand. Product Features — User—friendly alarm clock with single day alarm (optional) > Gonvenient cable—free Qi wireless charging > Connections for AC and USB—powered devices Effcient and stylish design > Complete surge protection through all AC outlets and/or USB Ports Product Description > 2 Tamper Resistant 110V ACoutlets > 2 Powered USB ports > Gi wireless charger > Surge Protector > 6ft 14AWG Power Cord with Pass Through Plug > Rubber Feet ———2Wo#dSrWs————————_ > Securty C—Clamp

FCC ID: 2AFT4-BPETO

important Safeguards : Ensure the unitis plugged into an AC 120V—60Hz outlet. The use of incorrect outlets could |cause the unit to malfunction or catch fire. : To reducethe risk offire or electrical shock, do not use this device with a receptace in which the slot openings do not align with the blades. : Do not allow children to operate the unit without adult supervision. ‘Always ensure the product is unplugged from the electrical outlet before relocating or cleaning it. : Keep the power cord and product away from heated surfaces. : Theunit should not be exposed to dripping or splashing and no objects filed with liquids, such las vases should be placed on or around the product. It should not be used with aquariums or lother water—related products, : Do not place or drop product into water or other liquids. If product falls into water, immediately lunplug it from the electrical outlet. : Do not put any stress on the power cord where it connects to the product as the power cord lcould fray and break. : Do not plug/unplug the product intoffrom the electrical outlet with a wet hand. : Do not operate the productifi has a damaged or cut power cord or adapter, t wires are lexposed, t it malfunctions,ifi is dropped or damaged, or is dropped in or exposed to water. : Place unit where there is good air circulation. : The product has no user—serviceable parts. Do not attemptto examine or repair this product yourselt. Only qualiied service personnel should perform the servicing. : No open flames sources, such as candles should be placed on the product : Product should orly be used indoors and in dry locations. :Working Temperature 0—35° C Limited 1 Year Warranty —[Products are warrantedbyBrandstand against manufacturingdefect in material and_| Iworkmanship under normal use for one year from the date of purchase. Defective products will Ibe exchanged for the same or comparable item. Return Policy For a refund or exchange, products must be returned within 30 days of original purchasedate. [Customers must contact Brandstand to obtain a Return Merchandise Authorization (RMA) Iumber and specific shipping instructions prior to returning the product. Any product returned Iwithout a RMA will be refused. Product must be in original box with original accessories and Ipackaging undamaged, clean and brand—new condition. Products that are incomplete, damaged Jor have been used will require a deduction in refund. There is a 30%restocking fee on all Feturned products. Refunds will be issued by check. Refund checks are mailed the 10th day from lhe date the product is returned. Delivery charges and customized products are non—returnable. [Disclaimer of Damages In no event shall Brandstand Products, or its suppliers, be liable for indirect,incidental, or [consequential damages, loss of profit, loss of use ordata, or interruption of business, whether the alleged damages are labeled in tort, contract,or indemnity, even if Brandstand Products or ts lsuppliers has been advised of the possibiity of such damages. Some states do not allow the lexclusion or limitation of incidental or consequential damages, so the above limitation may not lapply.

Battery Handling and Usage: WARNING: Only adults should handle batteries. Do not allow a child to use this product unless Battery CompartmentCover is securely attached to the Battery Compartment in accordance with lall product usage instructions. |—Followbatterymanufacturer‘sandinstructions:——————————————————— : : Keep batteries away from children and pets. : Do not mix a new and a used battery or mix batteries of different chemistries or sizes. : Insert the batteries observing the properpolarity (++) as indicated inside the battery |compartment. failure to property align the battery polarity can cause personal injury and/or property damage. : Remove spent or discharged batteries when not using the product for an extended period. : Never throw batteries into a fire. Do not expose batteries to fre or other heat sources. : Dispose or recycle spent/discharged batteries in compliance with all applicable laws. For ldetailed information, contact your local solid waste authority. The Brandstand Difference Surge Protection All Brandstand Cubie products pass: * UL1449 Surge Protection Devices Standard * UL 962A for Furniture PowerDistribution Units * UL2738 for Wireless Charging Safety Liquid Spill Testing For enhanced safety, the Cubie Product Line was designed for and successfully passed a UL spill test conducted by our ETL testing lab. Pass—Through Power Thepass—through power plug allows another device (Le. lamp or alarm clock) to be plugged into the same wall outlet used by the Cubie Product CubieTrio complies with the WPC (Wireless Power Consortium) Qi Standard

Unpacking and Set up: 1. Carefully removefrom packaging. Verify that you have all necessary components before you dispose of box and packaging. Component List: CubieTrio Main Unit * Security C—Clamp +2 Wood Scrows 2. Place in desired location. Note: This product is designed to be used on alevel, stable, flat surface such as a table, desk, shelf or stand, convenient to an AC outlet, out of direct sunlight and awat from sources of excess heat, dust, moisture or vibration. 3. Plug directly into wall AC outlet. Do not plug into another surge protector or extension cord. 4. Secure cord with Security C—Clamp to back of nightstand or desk. Wood screws are included.

CubieTrio — Top View G s Ecwbietrio wreless charging C D Q

Setting the Time: 1. Press and hold SNOOZE/DIMMER button for 6 seconds. 2, Year will begin to flash, adjust by rotating wheel, press center button to select, 3, Month will begin to flash, adjust by rotating the wheel, press center button to select. 4. Day will begin to flash, adjust by rotating the wheel, press centerbutton to select. 5. Time will begin to flash, adjust by rotating the wheel, press center button to select. EHp ASUp Setting the Alarm: 1. Press center button to turn ON alarm. 2, Alarm time will begin to flash, adjust by rotating wheel, press center button to select. (Alarm will automatically set to last selected alarm time after 6 seconds.) 3. Press center button to turn OFF alarm.

Qi Wireless Charging: 1. Place Qi enabled device on CubieTrio elastomer brackets. When the power connection has been made, the Qi symbol in the display will be illuminated. This indicates your device is wirelessly charging. 2, FOD — Foreign Object Detection is the abilty of the transmitter to detect a stray metal object in the wireless charging field.If a metallic object is placed on the charging pad, the Oi symbolin the display will blink and there will be an audible beep. Remove the motal object immediately. Secure Battery Door/Hidden Switches: Single Day Alarm (Preset to ON) ON: Alarm time will reset to 6:00am with every activation of the alarm OFF: The alarm time will default back to the last set alarm time with every activation. Daylight Saving Time (Preset to ON) ON: Time will automatically update +1 or—1 hour based on the pre—set Daylight Saving Time Calendar, Year, Month and Day must be set correctly for this feature to work property. OFF: Time will not automatically update for Daylight Saving Time, Any changes to the time must be manually updated. Back Up Battery Function One ©R2032 Coin Gell Battery is supplied with the clock. Ifthe AC power supply is interrupted, the internal clock will not be interrupted due to battery back up. Please note — The back up battery will not support the Alarm Settings.

Other Features: Snooze/Dimmer Button When in standby mode, press SNOOZE/DIMMER button to change brightness (off, dimmest, medium, brightest). When the display is turned off, user can also press and rotate the wheelto turn display ON. When alarm is sounding, press SNOOZE/DIMMER button to go to snooze status, the alarm symbol willflash and the alarm will resound after 9 minutes. Gradual Wake Alarm will sound in a low volume and gradually increaseto a higher volume. Brandstand 801 E. Campbell Rd. Suite 620 Richardson, TX 75081, USA 877—843—3681 www.brandstand.com © 2018 TXS Industrial Design I. d.b.a. Brandstand Products Brandstand is a registored trademark of TXS Industrial Dosign, nc. in the Unied States


Document Created: 2018-07-04 11:03:58
Document Modified: 2018-07-04 11:03:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC