RF Exposure Report

FCC ID: 2AFSGF3

RF Exposure Info

Download: PDF
FCCID_3047383

FCC ID :2ASGFRS RF EXPOSURE EVALUATION METHOD SAR Test Exclusion Thresholds for 100 MHz — 5 GHz and < 50 mm Approximate SAR Test Exclusion Power Thresholds t Selected Frequencies and Test Separation Distances are illustrated in the following Table. ie s 10 1s 20 2s mm 150 30 m 16 155 104 300 27 ss s uo 137 aso 22 as s7 so u> s3s 16 3 20 se > 900 16 3 a7 6 7s 1500 12 x 37 S a SAR Test Exclusion 190 U 2 3. 41 5t Threshold (@mW) 2450 10 19 zo 3s as 3600 s is 2 3 30 5200 7 is 20 26 3 s400 6 is 19 26 » Em s 12 19 25 a _| The 1—g and 10—g SAR test exclusion thresholds for 100 MHz to 6 GHe at test separetion distances < 50 mm are determined by: [{max. power of channel, including tune—up tolerance, mW)(min. test separation distance, mm}] + [/#(GHe)] < 3.0 for 19 SAR and < 7.5 for 10—g extremity SAR where 1(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is < 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion

FCC ID : 2AFSGF3 Maximum measured transmitter power. BT The Worst Case Maximum Peak frequency Conducted Output Max Antenna Gain Tune up tolerance Power GHz dBm dBm dBi 2.402 3.874 3.5±0.4 0 2.441 3.759 3.5±0.4 0 2.480 3.771 3.5±0.4 0 Remark: The worst case gain of the antenna is 0dBi. 0 dBi logarithmic terms convert to numeric result is nearly 1 Tune up Power(2402)= 2.45mw Tune up Power(2441)=2.45mw Tune up Power(2480)=2.45mw BT: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)]= 2.45/5*√2.402=0.759≤3.0 [(mid. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)]= 2.45/5*√2.441=0.766≤3.0 [(min. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)]= 2.45/5*√2.480=0.772≤3.0 Threshold at which no SAR required is 0.772 ≤ 3.0 for 1-g SAR, Separation distance is 5mm.


Document Created: 2016-06-29 06:22:33
Document Modified: 2016-06-29 06:22:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC