RF Exposure

FCC ID: 2AFP2FC40

RF Exposure Info

Download: PDF
FCCID_4393986

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 Fax: +86-755-26636041 RF EXPOSURE REPORT Report Reference No. .............. : CTL1907031011-MPE Compiled by Happy Guo ( position+printed name signature) (File administrators) Supervised by Nice Nong ( position+printed name+signature) (Test Engineer) Approved by Ivan Xie ( position+printed name+signature) (Manager) Testing Laboratory Name ........ : Shenzhen CTL Testing Technology Co., Ltd. Floor 1-A, Baisha Technology Park, No. 3011, Shahexi Address ...................................... : Road, Nanshan, Shenzhen 518055 China. Applicant’s name ..................... : Shenzhen Powerqi Technology Co., Ltd. 2nd Floor, A4 Building, Block A, Fangxing Science & Tech. Address ...................................... : Park, Longgang District, Shenzhen, China Test specification ..................... : Standard..................................... : FCC CFR 47 part1, 1.1307(b), 1.1310 TRF Originator ........................... : Shenzhen CTL Testing Technology Co., Ltd. Master TRF ................................ : Dated 2011-01 Test item description ............... : Wireless Charging Pad FCC ID ....................................... : 2AFP2FC40 Trade Mark ................................. : N/A Model/Type reference ................ : FC40, FC45 Transmit Frequency .................. : 115~205KHz Antenna type .............................. : Loop antenna Date of receipt of test item ............: Jul. 15, 2019 Date of sampling ...........................: Jul. 15, 2019 Date of Test Date ..........................: Jul. 15, 2019–Jul. 30, 2019 Data of Issue .................................: Jul. 31, 2019 Result ............................................: Pass Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context.

V1.0 Page 2 of 9 Report No.: CTL1907031011-MPE TEST REPORT Jul. 31, 2019 Test Report No. : CTL1907031011-MPE ________________________________________________________________________________________ Date of issue Equipment under : Wireless Charging Pad Test Type / Model(s) : FC40, FC45 Applicant : Shenzhen Powerqi Technology Co., Ltd. Address : 2nd Floor, A4 Building, Block A, Fangxing Science & Tech. Park, Longgang District, Shenzhen, China Manufacturer : Shenzhen Powerqi Technology Co., Ltd. Address : 2nd Floor, A4 Building, Block A, Fangxing Science & Tech. Park, Longgang District, Shenzhen, China Test Result PASS The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the issuing testing laboratory.

V1.0 Page 3 of 9 Report No.: CTL1907031011-MPE Contents 1. SUMMARY ....................................................................... 4 1.1. EUT configuration 4 2. TEST ENVIRONMENT......................................................... 4 2.1. Address of the test laboratory 4 2.2. Test Facility 4 2.3. Environmental conditions 5 2.4. Statement of the measurement uncertainty 5 3. METHOD OF MEASUREMENT .............................................. 6 3.1. Applicable Standard 6 3.2. Limit 6 4. TEST RESULT .................................................................. 7 4.1. Test Setup 7 4.2. Test Equipment 7 HI3637 .................................................................................... 7 4.3. Measurement Procedure 7 4.4. Equipment Approval Considerations 7 4.5. E and H field Strength 8 5. TEST SETUP PHOTO ......................................................... 9

V1.0 Page 4 of 9 Report No.: CTL1907031011-MPE 1. SUMMARY 1.1. EUT configuration Kind of Product Wireless Charging Pad Model Name FC40, FC45 Frequency Range 115-205KHz Antenna Type Inductive loop coil antenna FCC ID 2AFP2FC40 2. TEST ENVIRONMENT 2.1. Address of the test laboratory Shenzhen CTL Testing Technology Co., Ltd. Floor 1-A, Baisha Technology Park, No.3011, Shahexi Road, Nanshan District, Shenzhen, China 518055 The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.10 (2013) and CISPR Publication 32. 2.2. Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L7497 Shenzhen CTL Testing Technology Co., Ltd. has been assessed and proved to be in compliance with CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC 17025: 2005 General Requirements) for the Competence of Testing and Calibration Laboratories. A2LA-Lab Cert. No. 4343.01 Shenzhen CTL Testing Technology Co., Ltd, EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2005 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. IC Registration No.: 9518B CAB identifier: CN0041 The 3m alternate test site of Shenzhen CTL Testing Technology Co., Ltd. EMC Laboratory has been registered by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements with Registration No.: 9518B on Jan. 22, 2019. FCC-Registration No.: 399832 Designation No.: CN1216 Shenzhen CTL Testing Technology Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration 399832, December 08, 2017.

V1.0 Page 5 of 9 Report No.: CTL1907031011-MPE 2.3. Environmental conditions During the measurement the environmental conditions were within the listed ranges: Temperature: 15-35 ° C Humidity: 30-60 % Atmospheric pressure: 950-1050mbar 2.4. Statement of the measurement uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the apparatus:

V1.0 Page 6 of 9 Report No.: CTL1907031011-MPE 3. Method of measurement 3.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. According KDB 680106 D01 RF Exposure Wireless Charging App v03 3.2. Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Averaging Frequency Electric Field Magnetic Field Power Density Time Range(MHz) Strength(V/m) Strength(A/m) (mW/cm²) (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 614 1.63 (100) * 6 3.0 – 30 1842/f 4.89/f (900/f)* 6 30 – 300 61.4 0.163 1.0 6 300 – 1500 / / f/300 6 1500 – / / 5 6 100,000 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Averaging Frequency Electric Field Magnetic Field Power Density Time Range(MHz) Strength(V/m) Strength(A/m) (mW/cm²) (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 614 1.63 (100) * 30 3.0 – 30 824/f 2.19/f (180/f)* 30 30 – 300 27.5 0.073 0.2 30 300 – 1500 / / f/1500 30 1500 – / / 1.0 30 100,000 F=frequency in MHz *=Plane-wave equivalent power density

V1.0 Page 7 of 9 Report No.: CTL1907031011-MPE 4. Test Result 4.1. Test Setup Note: A, B, C, D, E, F for six surfaces of the product. 4.2. Test Equipment Calibrated Calibrated Equipment Manufacturer Model Serial no. date until E-Field Probe HOLADAY HI3637 00052130 2019.05.24 2020.05.23 H-Field Probe HOLADAY HI3637 00052130 2019.05.24 2020.05.23 4.3. The charger support DC 5V/2A and DC 9V/1.67A input modes, this 2 modes all have been tested, only worse case DC 5V/2A input mode was reported. 4.4. Measurement Procedure a) The RF exposure test was performed on 360 degree turn table in anechoic chamber. b) The measurement probe was placed at test distance (10cm) which is between the edge of the charger and the geometric centre of probe. c) The turn table was rotated 360d degree to search of highest strength. d) The highest emission level was recorded and compared with limit as soon as measurement of each points (A, B, C, D, E) were completed. e) The EUT were measured according to the dictates of KDB 680106 D01 RF Exposure Wireless Charging App v03. 4.5. Equipment Approval Considerations The EUT does comply with KDB 680106 D01 RF Exposure Wireless Charging App v03. (1) Power transfer frequency is less than 1 MHz.. (2) Output power from each primary coil is less than or equal to 15 watts. (3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. (4) Client device is placed directly in contact with the transmitter. (5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). (6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Remark: Meet all the above requirements.

V1.0 Page 8 of 9 Report No.: CTL1907031011-MPE 4.6. E and H field Strength Test mode for wireless charger: Normal Operation (Charging mode) E-Filed Strength at 15 cm from the edges surrounding the EUT Frequency Test Test Test Test Limits Range Position A Position B Position C Position D (V/m) (MHz) 0.123 2.16 2.02 2.39 2.37 614.0 E-Filed Strength at 20 cm from the top of the EUT (V/m) Frequency Test Limits Range Position E (V/m) (MHz) 0.123 1.13 614.0 H-Filed Strength at 15 cm from the edges surrounding the EUT Frequency Test Test Test Test Limits Range Position A Position B Position C Position D (A/m) (MHz) 0.123 0.352 0.347 0.348 0.341 1.63 H-Filed Strength at 20 cm from the top of the EUT (V/m) Frequency Test Limits Range Position E (A/m) (MHz) 0.123 0.231 1.63 Test mode for wireless charger: Normal Operation (No load mode) E-Filed Strength at 15 cm from the edges surrounding the EUT Frequency Test Test Test Test Limits Range Position A Position B Position C Position D (V/m) (MHz) 0.123 0.33 0.29 0.35 0.32 614.0 E-Filed Strength at 20 cm from the top of the EUT (V/m) Frequency Test Limits Range Position E (V/m) (MHz) 0.123 0.18 614.0 H-Filed Strength at 15 cm from the edges surrounding the EUT Frequency Test Test Test Test Limits Range Position A Position B Position C Position D (A/m) (MHz) 0.123 0.103 0.96 0.101 0.97 1.63 H-Filed Strength at 20 cm from the top of the EUT (V/m) Frequency Test Limits Range Position E (A/m) (MHz) 0.123 0.067 1.63

V1.0 Page 9 of 9 Report No.: CTL1907031011-MPE 5. Test Setup Photo .......................End of Report.........................


Document Created: 2019-08-08 19:42:25
Document Modified: 2019-08-08 19:42:25
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC