Modular Transmitter Approval

FCC ID: 2AFOSWT1231H-915

Attestation Statements

Download: PDF
FCCID_4222211

©5266091_X9_Ed.1 WIRELESS—TAG TECHNOLOGY CO., LIMITED Modular Transmitter Approval Request Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Company name: WIRELESS—TAG TECHNOLOGY CO., LIMITED FCC ID: 2AFOSWT1231H—915 Gentlemen, In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Certification Guide v01r04‘. FCC ID 2AFOSWT1231H—915 has been examined against the following requirements. The radio elements must have the radio frequency circuitry The modular transmitter have their own shielded. Physical components and tuning capacitor(s) may shielding. This module is granted as a be located external to the shield, but must be on the module Single Modular Approval. assembly The module must have buffered modulation/data inputs to The modular transmitter have buffered ensure that the device will comply with Part 15 requirements modulation/data inputs. with any type of input signal The modular transmitter have its own The module must contain power supply regulation on the power supply regulation. module The module must contain a permanently attached antenna, The modular transmitter comply with the or contain a unique antenna connector, and be marketed antenna requirements of Section 15.203 and operated only with specific antenna(s), per Sections and 15.204(c) with unique antenna 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) connector. antenna gain specified in user manual. The modular transmitter tested in a The module must demonstrate compliancein a stand—alone stand—alone configuration. configuration The module must be labelled with its permanently affixed The FCC ID on the FCC ID label, or use an electronic display (See KDB product: ZAFOSWT1231H—915 Publication 784748 about labelling requirements) The operating requirements and The module must comply with all specific rules applicable to instructions how to implement this the transmitter including all the conditions provided in the module are described in the user integration instructions by the grantee manual The module is Part 15 Low Power Communication Device, the modular The module must comply with RF exposure requirements transmitter comply with any applicable RF exposure requirements. Name: Louie Wang Date: Mar. 19, 2019 Title: manager Signature of applicant:/ 1/1


Document Created: 2019-03-28 11:39:09
Document Modified: 2019-03-28 11:39:09
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC