User Manual

FCC ID: 2AFKZ-SCANAIR

Users Manual

Download: PDF
FCCID_2775436

Air Air Air LED Indications Air Scanmarker Air has three controls:The device’s Tip and Installation two colored, Blue and Green LEDs. The Blue and Green LEDs indicate status and Operation BLUE LED (Wireless - Bluetooth connectivity) Instructions State Status Installation Steady Light (“On”) Connected Plug into a computer USB port or use a USB charger. No light (“Off”) Not connected Mac and Windows Blinking Searching and pairing with host Download the relevant application from www.scanmarker.com/download If the blue LED of the Scanmarker Air is on, but you don’t see it on your • Scanmarker Air can connect to computer either via USB or by the Blue-tooth dongle. device (computer or smartphone) App, make sure it is not connected to • Connect your Scanmarker Air only after installing the software. another host (other computer or smartphone of yours) Mobile IOS: Search for ‘Scanmarker Air’ app in App Store and install on device. GREEN LED (Battery status) Launch app and follow on-screen instructions. State Status Android: Search for ‘Scanmarker Air’ app in Play Store and install Steady Light (“On”) Charged on device. Launch app and follow on screen instructions. Blinking (fast) Low battery – charging is required Power On/Off Blinking (slow bursts) Charging. Turns to steady light TO TURN ON TO TURN OFF when battery is full TO TURN ON: Press tip gently against a surface for two seconds. TO TURN OFF: Tap the tip three times (quickly and gently) against a © Copyright 2015 surface. Scanmarker TM is a registered Trademark of Topscan Ltd. All software, hardware, design and implementations are copyright 2015 After being inactive for 12 minutes, the Scanmarker Air will auto-power off. by Topscan Ltd. All rights reserved Turn it back on to resume scanning.

Air Air Operation IOS/ Android The application collects the scans and saves them as text files. Activation You have up to 30 days to activate your Scanmarker Air application. You can share this text file using E-mail, Please make sure your device is connected to the internet and enter the code Dropbox or Google Drive. The text file that appears on the Warranty Card. can be read by any text application. Pairing Internet connection is required for every new pairing between Scanmarker Air and mobile devices. [Text files automatically open with Functions Notepad when using Windows. In order The three main functions of the Scanmarker Air application to open with MS Word (or other program), (either on PC, Mac or mobile device) are: right-click on the file and select ‘Open with’ to choose MS Word.] 1. Text scanning , transferring it to a digital format 2. Reading aloud (the scanned text) Scanning Tips 3. Translation of single word or entire paragraph • Hold the device as shown. • Press down gently until red light appears. Windows/ Mac The application allows the user to choose whether to scan • Slide your Scanmarker Air in one fluid motion. Avoid scanning too slow. to Scanmarker Air application or directly to external application • Scan one line of text at a time. Keep the line of text between the edges of the tip. (e.g. MS-Word, Chrome or others). • Avoid applying excessive pressure while scanning. • When scanning a single word, start well before the word begins and continue the scan well beyond it (but don’t scan multiple words). • For iOS/Android devices it is recommended to set “Connect to cloud” to “on” for faster scanning speed. Turning cloud scanning off may slow down scanning speed on older models mobile phones. Turn off when internet connection is slow or unavailable. • We recommend watching the video tutorial to help you perfect your scanning technique. On “Scan text” mode (under settings), the computer application enables the user Having trouble scanning? to choose scan type to optimize text capture. The available scan types are: Text • Check your settings to ensure that the following selections are correct; (default); Single word; Image; Numbers; Table; and Barcode. Input Language, Scan mode, Scanning hand. • Practice scanning in the ‘Test Device’ (Practice) screen. • If this doesn’t resolve the issue please contact support@scanmarker.com

FCC Compliance Statement This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio and television reception. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause such interference, which can be verified by turning the device off and on, the user is encouraged to eliminate the interference by one or more of the following measures: – Re-orient or re-locate the receiving antenna. – Increase the distance between the device and the receiver. – Connect the device to an outlet on a circuit different from the one that supplies power to the receiver. – Consult the dealer or an experienced radio/TV technician. WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with FCC Rules Part 15). Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may be received or that may cause undesired operation. To comply with FCC Section 1.310 for human exposure to radio frequency electromagnetic fields and IC requirements, implement the following instruction: A distance of at least 0.25 cm between the equipment and all persons should be maintained during the operation of the equipment.


Document Created: 2015-09-21 12:44:19
Document Modified: 2015-09-21 12:44:19
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC