RF Exposure Info

FCC ID: 2AFKNF308W

RF Exposure Info

Download: PDF
FCCID_4103036

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, China 518057 Telephone: +86 (0) 755 2601 2053 Report No.: SZEM181100950902 Fax: +86 (0) 755 2671 0594 Page: 1 of 8 Email: ee.shenzhen@sgs.com Human Exposure Report Application No.: SZEM1811009509CR Applicant: Spigen Korea Co., Ltd. Address of Applicant: Spigen HQ-A, 446, Bongeunsa-ro, Gangnam-gu, Seoul, 06153, South Korea Manufacturer: Shenzhen Wireless Technolo Co., Ltd. Address of Manufacturer: Floor 2,3 building A4, Fangxing Science and Technology park, NO. 13 Baonan Road, Longgang street, Longgang District Factory: SHENZHEN POWERQI TECHNOLOGY Co., LTD Address of Factory: Floor 2,3 building A4, Fangxing Science and Technology park, NO. 13 Baonan Road, Longgang street, Longgang District Equipment Under Test (EUT): EUT Name: Fast Wireless Charger Model No.: F308W FCC ID: 2AFKNF308W Trade mark: Spigen Standards: 47 CFR PART 1, Subpart I, Section 1.1310 Date of Receipt: 2018-11-01 Date of Test: 2018-11-01 to 2018-11-07 Date of Issue: 2018-11-07 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above Keny Xu EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181100950902 Page: 2 of 8 1 Contents Page 1 CONTENTS .............................................................................................................................................................. 2 2 GENERAL INFORMATION .................................................................................................................................... 3 2.1 DETAILS OF E.U.T. ................................................................................................................................................. 3 2.2 DESCRIPTION OF SUPPORT UNITS ............................................................................................................................ 3 2.3 TEST LOCATION ...................................................................................................................................................... 4 2.4 TEST FACILITY ........................................................................................................................................................ 4 2.5 DEVIATION FROM STANDARDS................................................................................................................................ 5 2.6 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................... 5 3 EQUIPMENTS USED DURING TEST .................................................................................................................. 5 4 TEST RESULTS ...................................................................................................................................................... 6 4.1 RF EXPOSURE TEST ................................................................................................................................................ 6 4.1.1 E.U.T. Operation ........................................................................................................................................ 6 4.1.2 Measurement Data .................................................................................................................................... 7 5 PHOTOGRAPHS- RF EXPOSURE SETUP PHOTOS ...................................................................................... 8 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181100950902 Page: 3 of 8 2 General Information 2.1 Details of E.U.T. Power supply: Input: DC 9V, 1.67A Output: 5W/7.5W/10W Cable: USB charging line: 40cm, unshielded Antenna Type: Inductive Loop Coil Antenna Modulation Type: Load Modulation Operation Frequency: 109.29kHz to 168.59kHz Remark: Tests were conducted in all three load modes and the worst case(10W) is reported only. 2.2 Description of Support Units Description Manufacturer Model No. Serial No. Adapter Apple A1357 W010A051 REF. No.SEA0500 Adapter SAMSUNG EP-TA200 R37J8YA7W71DK3 iPhone 8 Apple A1863 F4GVQ656JC6D Mobile Phone SAMSUNG SM-G9500 R28J9140LPB This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181100950902 Page: 4 of 8 2.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch E&E Lab, No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong,China 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 2.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181100950902 Page: 5 of 8 2.5 Deviation from Standards None. 2.6 Abnormalities from Standard Conditions None. 3 Equipments Used during Test Inventory Cal. Due date Item Test Equipment Manufacturer Model No. No. (yyyy-mm-dd) 1 Shielding Room SAEMC MSR733 SEM001-09 2020-05-09 Electric and 2 Magnetic Field Narda EHP-50F EMC092 2019-02-06 Analyzer This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181100950902 Page: 6 of 8 4 Test Results 4.1 RF Exposure test Test Requirement: 47 CFR PART 1, Subpart I, Section 1.1310 Measurement Distance: 15cm Limit: Frequency range Electric field strength Magnetic field strength Power density Averaging time (MHz) (V/m) (A/m) (mW/cm2) (minutes) (A) Limits for Occupational/Controlled Exposures 0.3-3.0 614 1.63 *(100) 6 3.0-30 1842/f 4.89/f *(900/f2) 6 30-300 61.4 0.163 1.0 6 300-1500 / / f/300 6 1500-100,000 / / 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f2) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 F=frequency in MHz *=Plane-wave equivalent power density RF exposure compliance will need to be determined with respect to 1.1307(c) and (d) of the FCC rules. The emissions should be within the limits at 300kHz in Table 1 of 1.1310(use the 300kHz limits for 150kHz:614V/m,1.63A/m). 4.1.1 E.U.T. Operation Operating Environment: Temperature: 25.0 °C Humidity: 52 % RH Atmospheric Pressure: 1015 mbar EUT Operation: This device has been tested the worst status of full load and the device has been tested with load at zero charge, intermediate charge, and full charge. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181100950902 Page: 7 of 8 4.1.2 Measurement Data Output Voltage=DC 9V; The max output power =10W;Calculation of resistor value=8.1Ω Electric Field Emissions Operation Test Distance Test Position Probe Measure 50% Limit frequency Result (V/m) (cm) (V/m) Side 1 1.51 307 Side 2 1.37 307 147.2 kHz 15 Side 3 1.42 307 Side 4 1.19 307 Top 1.83 307 Magnetic Field Emissions Operation Test Distance Test Position Probe Measure 50% Limit frequency Result (A/m) (cm) (A/m) Side 1 0.0432 0.815 Side 2 0.0331 0.815 147.2 kHz 15 Side 3 0.0405 0.815 Side 4 0.0326 0.815 Top 0.0523 0.815 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM181100950902 Page: 8 of 8 Electric Field Emissions Operation Test Probe Measure Result(V/m) Test 50%Limit frequency Distance Position zero intermediate full charge charge charge (V/m) (cm) Side 1 1.47 1.44 1.43 307 Side 2 1.37 1.36 1.28 307 147.2 kHz 15 Side 3 1.46 1.38 1.34 307 Side 4 1.22 1.12 1.19 307 Top 1.85 1.87 1.81 307 Magnetic Field Emissions Operation Test Probe Measure Result(A/m) Test 50%Limit frequency Distance Position zero intermediate full charge charge charge (A/m) (cm) Side 1 0.0437 0.0421 0.0453 0.815 Side 2 0.0325 0.0296 0.0298 0.815 147.2 kHz 15 Side 3 0.0411 0.0392 0.0405 0.815 Side 4 0.0332 0.0316 0.0327 0.815 Top 0.0518 0.0504 0.0497 0.815 5 Photographs- RF exposure Setup photos Refer to setup photos. - End of the Report - This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only


Document Created: 2018-12-03 08:34:16
Document Modified: 2018-12-03 08:34:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC