RF Exposure

FCC ID: 2AFIW-MT300A

RF Exposure Info

Download: PDF
FCCID_3103395

Radio Frequency Exposure Report On Behalf of GL Technologies (Hong Kong) Limited 210D Enterprise Place, Hong Kong Science Park, Sha Tin, NT, Hong Kong Product Name: GL-MT300A mini router Model/Type No.: GL-MT300A FCC ID: 2AFIW-MT300A Prepared By: Shenzhen Hongcai Testing Technology Co., Ltd. 1st-3rd Floor, Building C, Shuanghuan Xin Yi Dai Hi-Tech Industrial Park, No.8 Baoqing Road, Baolong Industrial Zone, Longgang District, Shenzhen, Guangdong, China Tel: +86-755-86337020 Fax:+86-755-86337028 Report Number: HCT16FR134E-2 Tested Date: July 4~13, 2016 Issued Date: July 13, 2016 Tested By: Haiqing. Zhao/ Reviewed By: Approved By: Owen.Yang Tony Wu EMC Technical Supervisor EMC Technical Manager

TABLE OF CONTENTS 1 - GENERAL INFORMATION .................................................................................................................. 3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................................ 3 1.2 OBJECTIVE ................................................................................................................................................................. 4 1.3 GENERAL DESCRIPTION OF TEST .................................................................................................................................. 4 1.4 HUMAN EXPOSURE ASSESSMENT RESULTS ................................................................................................................... 5 Report No.: HCT16FR134E-2 Page 2 of 6

1 - GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Applicant: GL Technologies (Hong Kong) Limited. Address of Applicant: 210D Enterprise Place, Hong Kong Science Park, Sha Tin, NT, Hong Kong. Manufacturer 1: GL Technologies (Hong Kong) Limited. Address of manufacturer: 210D Enterprise Place, Hong Kong Science Park, Sha Tin, NT, Hong Kong. General Description of E.U.T Items Description EUT Description: GL-MT300A mini router Model No.: GL-MT300A Frequency Band: ～ IEEE 802.11b : 2412MHz 2462MHz; ～ IEEE 802.11g : 2412MHz 2462MHz; ～ IEEE 802 11n(HT20) : 2412MHz 2462MHz; IEEE 802 11n(HT40) : 2422MHz～2452MHz; Number of Channels: IEEE 802.11b :11 Channels; IEEE 802.11g :11 Channels; IEEE 802 11n(HT20) : 11 Channels; IEEE 802 11n(HT40) : 7 Channels; Channels Spacing: IEEE 802.11b : 5MHz IEEE 802.11g : 5MHz IEEE 802 11n(HT20) : 5MHz IEEE 802 11n(HT40) : 5MHz Type of Modulation: ： IEEE 802.11b CCK ： IEEE 802.11g OFDM IEEE 802 11n(HT20) OFDM： IEEE 802 11n(HT40) OFDM： Transmit Data Rate: maximum of 300Mbps Antenna Type: PCB Antenna Antenna Gain: Ant 1: 3.7dBi(Numeric gain:2.34) Ant 2: 3.7dBi(Numeric gain:2.34) Power Rating: DC 5V/1A from micro USB Remark: * The test data gathered are from the production sample provided by the manufacturer. * Supplementary models have the same base board circuit, the appearance is different. Report No.: HCT16FR134E-2 Page 3 of 6

1.2 Objective The objective of the following report is used to demonstrate that EUT operated in a manner that ensures the public is not exposed to radio frequency energy levels in excess of the relative provisions of FCC 47CFR Part 1.1307 1.3 General Description of Test Items Description EUT Frequency band FHSS: 2.400GHz ~ 2.483GHz WLAN: 2.400GHz ~ 2.483GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Others: __________________________ Device category Portable (<20cm separation) Mobile (>20cm separation) Others __________________________ Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Others: __________________________ Antenna diversity Single antenna Multiple antennas: Tx diversity Rx diversity Tx/Rx diversity Max. output power Chain 1:19.25dBm (0.0841W) Chain 2:24.57dBm(0.286W) Antenna gain (Max) Ant 1:3.7dBi(Numeric gain:2.34) Ant 2: 3.7dBi(Numeric gain:2.34) Evaluation applied MPE Evaluation SAR Evaluation Note: Chain 1:1. The maximum output power is 19.25dBm at IEEE 802.11g mode 2412MHz (with 2.34 numeric antenna gain.) Chain 2: 2. The maximum output power is 24.57dBm at IEEE 802.11g mode 2412MHz (with 2.34 numeric antenna gain.) 3. For mobile or fixed location transmitters, no SAR consideration applied. The minimum separation generally be used is at least 20 cm, even if the calculations indicate that the MPE distance would be lesser. Report No.: HCT16FR134E-2 Page 4 of 6

1.4 Human Exposure Assessment Results EUT parameter (data from the separate report) Given Where G: numerical gain of transmitting antenna; TP: Transmitted power in watt; d: distance from the transmitting antenna in meter Chain 1:19.25dBm (0.0841W) Max average output power in Watt (TP) Chain 2:24.57dBm(0.286W) Ant 1:3.7dBi(Numeric gain:2.34) Antenna gain (G) Ant 2: 3.7dBi(Numeric gain:2.34) Exposure classification S=1mW/cm2 Minimum distance in meter (d) 20cm (0.2m) (from transmitting structure to the human body) Report No.: HCT16FR134E-2 Page 5 of 6

Yields 30 xPxG S= , 3770d 2 Chain 1:P1=0.0841W, G1=2.34, d1=0.2, S1=0.0391mW/cm2 Chain 2:P2=0.286W, G2=2.34, d2=0.2, S2=0.1331mW/cm2 Or 30xPxG d= , 3770S Chain 1:S1=1, P1=0.0841W, G1=2.34, d1=0.0396m Chain 2:S2=1, P2=0.286W, G2=2.34, d2=0.0729m Conclusion: S1=0.0391mW/cm2 and S2=0.1331mW/cm2 is significant lower than the General Population Exposure Power Density Limit 1mW/cm2 or except the distance when human body proximity to the antenna is less than 2.67cm then will reach the General Population Exposure Power Density Limit (For mobile or fixed location transmitters, the maximum power density is 1.0 mW / cm2 even if the calculation indicates that the power density would be larger.) Report No.: HCT16FR134E-2 Page 6 of 6


Document Created: 2016-08-16 10:01:48
Document Modified: 2016-08-16 10:01:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC