UM

FCC ID: 2AFHW-VWM100

Users Manual

Download: PDF
FCCID_4401244

™ VICTllDLA BLUETOOTH TURNTABLE Model: VWM-100SB Instruction Manual PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE AND KEEP IT FOR FUTURE REFERENCE.


SAFETY INSTRUCTIONS 1. Read these instructions — All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions — The safety and operating instructions should be retained for future reference. 3. Heed all warnings — All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions — All operating and use instructions should be followed. 5. Do not use this apparatus near water — The appliance should not be used near water or moisture — for example, in a wet basement, near a swimming pool, or near other wet areas. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Keep at least 5 cm around the apparatus for sufficient ventilations. Install in accordance with the manufacturer‘s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip—over. 13. Unplug the apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Please keep the unit in a well ventilated environment. 16. Only use attachments/accessories specified or provided by the manufacturer 17. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall not be placed on apparatus. 18. The main plug is used as disconnect device, the disconnected device shall remain readily operable. 19. This product is not intended for commercial use. Household Use Only. 2

20. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. 21. a CAUTION n Enmastrsamsmmmen mekormromostock Tamszetensmmernl® Thp Iightnin_g flash v»{ilh arrowhead within an CAUTION: TO PREVENT The exclgmation point within an equilateral valtage" within the product‘s enclosure that N?figfigé%%figfi%m maintenance (servicing) instructions in the may be of sufficient magnitude to constitute a REFER SERVICING TO CUALINED . literature accompanying the appliance. risk of eleciric shock. SERVICE PROFESSIONAL. Warning: To reduce the risk of fire or electrical shock, do not exposed the apparatus to rain or moisture. No naked flame sources such as candles shall be placed on top of the apparatus. Caution: Changes or modifications not expressly approved by the manufacturer could void the user‘s authority to operate this device. Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous exposure. SPECIFICATIONS AC/DC AU@DEOF! ... ... cccaneeeeeaerereeearrrreearrerreerrrer en rnree ns Input: 100—240V, 50/60Hz, 0.2 Max ................................................................................... Output: 5V—=1A ................................................................................... Power: 5W SDEAKEF IMDEUANCE] ...........es cce en eener en en eanrereeerrn en en rnes 4ohm, SW MX POWB@r CONSUMPDtION!............ ce eecae en eenerreereanreree es l IMCIUU@O1 22 1212000000000 e e eeerrrrererrrrrearrrre en rerrererrree en rereennee Turntable, Instruction Manual, Turntable Operation Sheet, SV/1A switching power supply, and 45 RPM adaptor Design and specification are subject to change without notice. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners

TT TURNTABLE LAYOUT TURNTABLE LAYOUT I 15 16 .. .. － . ． ＿ ． .. ． ｀ ＇ , , ·r:., － 18 19 1. TURNTABLE PLATTER 2. TURNTABLE SHAFT 3. 45 RPM ADAPTOR 4. LIFT LEVER 5. TONE ARM CLIP 6. LINE-IN JACK 7. AUTO AND MANUAL STOP SELECTION SWITCH 8. FUNCTION (BT (BLUETOOTH), LINE-IN, PHONO, BT OUT (BLUETOOTH OUT) KNOB 9. SPEED SELECTION SWITCH 10. TONE ARM 11. POWER ON/OFF AND VOLUME CONTROL KNOB 12. POWER/BLUETOOTH LIGHT INDICATOR 13. STYLUS CARTRIDGE 14. HEADPHONE JACK 15. BUCKLE 16. HANDLE 17. SPEAKERS 18. RCA OUTPUT JACK 19. POWER ADAPTOR JACK 4


BLUETOOTH OPERATION An external device with Bluetooth Connectivity can be wirelessly connected to this turntable using the Bluetooth function. 1. Power ON the unit by turning the VOLUME CONTROL KNOB clockwise. 2. Turn the FUNCTION KNOB to the BT (Bluetooth吖position, the blue LED light will begin to flash. 3. Turn your external device's Bluetooth Setting ON. Wait a moment, then look for the Bluetooth pairing name "Vintage Turntable". 4. Select the Bluetooth pairing name, to connect the unit. Once connected, the blue LED light will stop flashing. 5. You are now connected to your external device via Bluetooth! 6. Rotate the VOLUME CONTROL KNOB to adjust the sound level. BLUETOOTH OUT OPERATION The product supports Bluetooth wireless connection. It can be connected with external Bluetooth-compatible headphones and Bluetooth speakers. 1. Power ON the unit by turning the VOLUME CONTROL KNOB clockwise. 2. Turn the FUNCTION KNOB to the BT OUT (Bluetooth out) position, the blue LED light will begin to slow flash 3. Turn ON your external Bluetooth receiver device (such as Bluetooth headphones and Bluetooth speakers) and set to pairing mode. 4. When pairing is complete, the blue LED light will stop flashing. 5. You are now connected to your external Bluetooth device. •• Place the device within 1 m (3.3') of the product to perform pairing correctly. •• The product stays in the pairing mode for 30 seconds. If pairing is not properly completed, follow the above steps again from the beginning. AUX-IN OPERATION An external (auxiliary) audio source (i.e. personal CD/MP3 Player/Mobile phone or computer) can be connected to this apparatus via the LINE-IN JACK. 1. Plug a detachable Aux Cable (not provided) into the LINE-IN socket on the function panel of the apparatus. 2. Turn the FUNCTION KNOB to the LINE-IN position, the LED will turn purple. 3. Plug the other end of the Aux Cable into the Headphone or Line Out socket of your External Source. 4. Power ON the unit by turning the VOLUME CONTROL KNOB clockwise. 5. Rotate the VOLUME CONTROL KNOB to adjust the sound level. 6

I EARPHONE OPERATION Plug the earphone jack into the earphone port on the function panel to listen to the record. The built-in speaker will stop playing once the earphones are plugged in. NOTE: For best performance and product maintenance, unplug the turntable when not in use. FCC STATEMENT Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. NOT E: This equipment has been tested and found to comply with the limits for Class B di�ital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/fV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the I following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The term “IC: “ before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna transmitter. End-user must be provided with transmitter operating conditions for satisfying RF exposure compliance. L'antenne ou les antennes utilisées pour cet émetteur doivent être installées de manière à assurer une distance de séparation d'au moins 20 cm vis-à-vis de toutes les personnes et ne doivent pas être co-localisées ni utilisées conjointement avec un autre émetteur d'antenne. Conditions de fonctionnement pour satisfaire à la conformité d'exposition RF. 7

CALIFORNIA PROP 65 WARNING WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. WARRANTY WARRANTY Victrola is a registered trademark of Innovative Technology Electronics LLC. Innovative Technology Electronics LLC. Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics LLC. (IT) warrants the product to be free from "Defects" in materials under normal use for a period of "One Year" from the date of the original purchase. The Warranty is "Not" transferable. IT agrees, within the initial "90 Day" period, to repair or replace the product if it is determined to be defective at "No Charge". It is further agreed that IT will cover the cost to repair or replace damaged "Parts" only for a total period of "One Year" from the date of the original purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads, or damage due to line power surges, connection to improper voltage supply or settings, misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service agent. To obtain service, the purchaser MUST present an original sales receipt / proof of purchase. Please contact us at www.victrola.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to sender. Upon receipt of the returning item and our full inspection (IT) may issue a replacement to customer for the same item or of one that has equivalent value and features. To return an item, supply full name, return address, phone number, item purchased, receipt of purchase and reason for return to obtain RMA number. All returns must be in the original packaging or reasonable substitute to prevent damage. Customer "Must" include full name, shipping address and telephone number inside of package. No return will be shipped back to a PO Box or APO address. Please include your check or money order in the amount of: • USD $5.00 for items $10.00 to $39.99. (Price Paid Per Unit) • USD $10.00 for items $40.00 to $99.99. (Price Paid Per Unit) ·USD $16.00 for items $100.00 and up. (Price Paid Per Unit) • Shipping fees are non-refundable. to be payable to Innovative Technology Electronics LLC. (for handling and return shipping charges) (IT) will not be responsible for delays or unprocessed claims resulting from a purchaser's failure to provide any/ all of the necessary information. Send all inquiries or RMA request via our website www.victrola.com/pages/technical-support. Innovative Technology Electronics LLC. 1 Channel Drive Port Washington, NY 11050 Toll free: 1-877-483-2497 Website for support: www.victrola.com/pages/technical-support There are no express warranties except as listed above. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Made In China. 8


Document Created: 2019-08-12 16:22:41
Document Modified: 2019-08-12 16:22:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC